• 제목/요약/키워드: Stable fatigue

검색결과 190건 처리시간 0.023초

강도를 고려한 섬유-금속 적층 복합재료의 최적설계 (Stacking Sequence Design of Fiber-Metal Laminate Composites for Maximum Strength)

  • 남현욱;박지훈;황운봉;김광수;한경섭
    • Composites Research
    • /
    • 제12권4호
    • /
    • pp.42-54
    • /
    • 1999
  • 섬유-금속 적층 복합재료(FMLC)는 섬유와 금속 박판으로 구성된 새로운 형태의 구조재로 가볍고 우수한 피로 특성을 가지며 금속과 같이 가소성과 충격저항성이 우수하고, 가공성이 뛰어나다. 본 연구에서는 여러 하중 조건하에 있는 섬유-금속 적층 복합재료를 유전자 알고리듬을 이용하여 최적 설계하였다. 전단변형이론에 근거한 유한요소법을 사용하여 적층판을 해석하였으며, 설계변수로 금속판의 강도와 섬유 층의 수에 따른 적층각도를 두었다. 섬유층과 금속판의 적합도 함수로는 각각 Tasi-Hill failure criterion과 Miser yield criterion을 사용하였다. 유전자 알고리듬의 연산자로는 토너먼트 선택과 균일 교배를 사용하였다. 효율적인 진화를 위해 엘리티스트 모델을 사용하며, 높은 정확도를 가진 해를 얻기 위해 크리프 무작위 탐색(creeping random search) 방법을 통해 더 우수한 자손을 얻었다. 여러 가지 하중 조건에 대하여 최적설계 결과를 나타내었으며, 파괴 지수 측면에서 탄소섬유강화복합재료(CFRP)와 비교하였다. 해석 결과 섬유-금속 적층 복합재료는 탄소섬유강화복합재료에 비하여 집중하중이나 분포하중 형태에 대하여 우수한 특성을 보였으며, 파괴 지수의 편차가 적어 예기치 않은 하중에 잘 견딜 것으로 사료된다.

  • PDF

Performance of innovative composite buckling-restrained fuse for concentrically braced frames under cyclic loading

  • Mohammadi, Masoud;Kafi, Mohammad A.;Kheyroddin, Ali;Ronagh, Hamid R.
    • Steel and Composite Structures
    • /
    • 제36권2호
    • /
    • pp.163-177
    • /
    • 2020
  • Concentrically Braced Frames (CBFs) are commonly used in the construction of steel structures because of their ease of implementation, rigidity, low lateral displacement, and cost-effectiveness. However, the principal disadvantage of this kind of braced frame is the inability to provide deformation capacity (ductility) and buckling of bracing elements before yielding. This paper aims to present a novel Composite Buckling Restrained Fuse (CBRF) to be utilized as a bracing segment in concentrically braced frames that allows higher ductility and removes premature buckling. The proposed CBRF with relatively small dimensions is an enhancement on the Reduced Length Buckling Restrained Braces (RL-BRBs), consists of steel core and additional tensile elements embedded in a concrete encasement. Employing tensile elements in this composite fuse with a new configuration enhances the energy dissipation efficiency and removes the tensile strength limitations that exist in bracing elements that contain RL-BRBs. Here, the optimal length of the CBRF is computed by considering the anticipated strain demand and the low-cyclic fatigue life of the core under standard loading protocol. An experimental program is conducted to explore the seismic behavior of the suggested CBRF compare with an RL-BRB specimen under gradually increased cyclic loading. Moreover, Hysteretic responses of the specimens are evaluated to calculate the design parameters such as energy dissipation potential, strength adjustment factors, and equivalent viscous damping. The findings show that the suggested fuse possess a ductile behavior with high energy absorption and sufficient resistance and a reasonably stable hysteresis response under compression and tension.

Stereotactic body radiation therapy for liver oligo-recurrence and oligo-progression from various tumors

  • Cha, Yu Jin;Kim, Mi-Sook;Jang, Won-Il;Seo, Young Seok;Cho, Chul Koo;Yoo, Hyung Jun;Paik, Eun Kyung
    • Radiation Oncology Journal
    • /
    • 제35권2호
    • /
    • pp.172-179
    • /
    • 2017
  • Purpose: To evaluate the outcomes of stereotactic body radiation therapy (SBRT) for patients with liver oligo-recurrence and oligo-progression from various primary tumors. Materials and Methods: Between 2002 and 2013, 72 patients with liver oligo-recurrence (oligo-metastasis with a controlled primary tumor) and oligo-progression (contradictory progression of a few sites of disease despite an overall tumor burden response to therapy) underwent SBRT. Of these, 9 and 8 patients with uncontrollable distant metastases and patients immediate loss to follow-up, respectively, were excluded. The total planning target volume was used to select the SBRT dose (median, 48 Gy; range, 30 to 60 Gy, 3-4 fractions). Toxicity was evaluated using the Common Toxicity Criteria for Adverse Events v4.0. Results: We evaluated 55 patients (77 lesions) treated with SBRT for liver metastases. All patients had controlled primary lesions, and 28 patients had stable lesions at another site (oligo-progression). The most common primary site was the colon (36 patients), followed by the stomach (6 patients) and other sites (13 patients). The 2-year local control and progression-free survival rates were 68% and 22%, respectively. The 2- and 5-year overall survival rates were 56% and 20%, respectively. The most common adverse events were grade 1-2 fatigue, nausea, and vomiting; no grade ${\geq}3$ toxicities were observed. Univariate analysis revealed that oligo-progression associated with poor survival. Conclusion: SBRT for liver oligo-recurrence and oligo-progression appears safe, with similar local control rates. For liver oligo-progression, criteria are needed to select patients in whom improved overall survival can be expected through SBRT.

한.중 FTA 추진에 따른 농산물교역의 과제와 대응방안 (Prospect of FTA and Trade of Agricultural Products between Korea and China)

  • 배기형;조성제
    • 통상정보연구
    • /
    • 제12권3호
    • /
    • pp.167-195
    • /
    • 2010
  • The global financial crisis, the instability of the global economy since the beginning of the growing economic interests of the countries to adjust to establish a new economic system was set up on occasion. Meanwhile, standing in the international trade environment, multilateral system of international trade for the country as the cumulative fatigue of open markets and trade liberalization as an alternative to lead the free trade agreements between countries. Currently in Korea and China, in addition to the geographical proximity in all areas, including economic exchanges and mutually dependent relationship that is deepening the world's No. 1 exporter in China and overseas investors have become partners. FTA with China by promoting the growth of emerging economies in the Chinese market by securing a stable economic growth of China as a driver of economic growth in the country to utilize the plan is being promoted from. This study is currently being promoted, in a discussion of the FTA's agricultural trade measures to address the challenges and poems. Agricultural trade with other goods to be different from the specificity of the discussion of market opening and liberalization of trade has been recognized in the main essentially nothing. We promote an FTA, according to one review and discuss the background and trends of the agricultural trade in a market, through the analysis of the status and trends and present problems for future bilateral trade negotiations with Korea for agricultural markets and propose countermeasures for. Agricultural trade, during a discussion of the FTA is essentially nothing in the review is expected to expand the bilateral trade in agricultural products, while protecting its agricultural markets to be trying to policy implications.

  • PDF

GCV소재의 DLC 코팅 마모특성에 관한 연구 (Study on Wear Properties of GCV Materials with DLC Coating)

  • 이수철;김남석;남기우;안석환;김현수
    • 한국해양공학회지
    • /
    • 제24권6호
    • /
    • pp.71-75
    • /
    • 2010
  • Although Graphite Compacted Vermicular (GCV) was first observed in 1948, the narrow range for stable foundry production precluded the high volume application of GCV to complex components such as cylinder blocks and heads until advanced process control technologies became available. This, in turn, had to await the advent of modern measurement electronics and computer processors. Following the development of foundry techniques and manufacturing solutions, primarily initiated in Europe during the 1990s, the first series production of GCV cylinder blocks began during 1999. Today, more than 40,000 GCV cylinder blocks are produced each month for OEMs, including Audi, DAF, Ford, Hundai, MAN, Mercedes, PSA, Volkswagen, and Volvo. Given that new engine programs are typically intended to support three to four vehicle generations, the chosen engine materials must satisfy current design criteria and also provide the potential for future performance upgrades without changing the overall block architecture. With at least a 75% increase in the ultimate tensile strength, a 40% increase in the elastic modulus, and approximately double the fatigue strength of either iron or aluminum, GCV is ideally suited to meet current and future of engine design and performance requirements.

CFD에 의한 H 및 Helical 타입 조류발전용 터빈의 출력성능예측에 관한 연구 (Investigating the Power-Performance Prediction on an H- and Helical-type Tidal Current Turbine Using CFD Method)

  • 김범석
    • 대한기계학회논문집B
    • /
    • 제39권8호
    • /
    • pp.653-660
    • /
    • 2015
  • 본 연구에서는 CFD 해석기법을 이용하여 서로 다른 두 가지 형식의 수직축 조류발전용 터빈에 대한 출력성능 및 하중 해석을 수행하였다. ANSYS CFX를 이용하여 시간변화에 따른 해석을 수행하였으며, H 타입 로터의 정상 및 극치운전조건에서 각각 7.47kW와 67.6kW의 출력이 나타났다. 이는 초기 설계조건에 적합하지 않은 것으로 확인되었으며, helical 타입 로터의 정상 및 극치운전조건에서는 출력성능이 거의 설계 운전점에 가까운 특성을 나타내었다. 블레이드 주변에 발생하는 캐비테이션은 두 종류의 로터 블레이드 모두에서 반복적으로 발생되었으며, 조류 터빈의 순간 출력변화에 많은 영향을 미칠 수 있다. 따라서 안정적인 출력품질의 확보 및 피로파손 방지를 위해서는 캐비테이션 현상의 발생을 최소화 할 수 있는 설계가 필요하다.

잉크젯 프린터용 발열체의 제작과 특성연구 (Preparation and Characterization of Heating Element for Inkjet Printer)

  • 장호정;노영규
    • 마이크로전자및패키징학회지
    • /
    • 제10권3호
    • /
    • pp.1-7
    • /
    • 2003
  • 잉크젯 헤드의 발열체에 적용하기 위해 $poly-Si/SiO_2/Si$ 다층기판 위에 결정화된 안정한 코발트실리사이드$(CoSi_2)$ 박막을 형성하여 오메가 형태의 발열체를 제작하고 발열체의 구조적 형상과 온도저항계수 등 전기적 특성을 조사, 연구하였다 $(CoSi_2)$ 박막의 형성은 금속 Co 박막을 급속 열처리장치를 이용하여 $800^{\circ}C$에서 20초 동안 질소 분위기에서 열처리하여 실리사이드 박막을 형성하였다. 발열체의 온도 저항계수 값은 약 $0.0014/^{\circ}C$ 값을 얻을 수 있었다. 인가전압 10 V, 주파수 10KHz 및 펄스간격 $1{\mu}s$ 인가시 발열체의 순간전력은 최대 2W를 나타내었다. 반복된 전압인가에 따른 발열체의 피로특성을 조사한 결과 15 V 이하의 전압인가시 $10^8$ 펄스 cycle 까지 저항변화가 거의 없었으나 17 V 인가전압에서는 $10^6$ cycle에서 발열체의 저항이 급격히 증가하였다.

  • PDF

무선 갠트리 로더 시스템 개발 (Development of Wireless Gantry Loader System)

  • 강동배;안중환;손성민
    • 한국산학기술학회논문지
    • /
    • 제12권10호
    • /
    • pp.4296-4301
    • /
    • 2011
  • 갠트리 로더(Gantry loader)는 생산설비 자동화의 물류이송에서 중요한 역할을 하고 있다. 최근 물류 반송거리가 확대되면서 이동반(Carrier)과 제어반(Controller)의 유선연결로 갠트리 운동의 장해, 주기적 유지보수로 인한 시간 지연 등이 문제점으로 대두되고 있다. 본 연구에서는 이동반과 제어반의 연결을 무선화 하여 생산효율을 향상시키고자 갠트리 로더의 기구부를 트롤리 바(Trolley Bar)를 사용하여 개선하고 무선통신 시스템과 모션 제어기 및 제어 프로그램을 제작하여 무선 갠트리 로더 시스템을 개발하였으며 유선 갠트리 시스템과의 비교 평가를 통해 정밀도와 안정성을 확인하였다.

나노 은을 이용한 전자파 차폐 직물이 뇌파에 미치는 영향 (A Study on the Effects of Electroencephalogram of Blocking Electromagnetic Wave Materials by useing the Nano Silver)

  • 이수정;이태일
    • 한국의류산업학회지
    • /
    • 제6권6호
    • /
    • pp.810-814
    • /
    • 2004
  • This study is one of the fundamental researches for the development of future smart clothing and textile products using silver(Ag) nano powder. Our study was focused on the blocking or insulating effects of nano-processed textiles from electromagnetic waves. Also, for the surveying of the actual effect to human body, we measure the variation of electroencephalogram which is an indication of human physical symptoms. Among various textiles in this experiment, nano silver processed case has shown the best blocking performance from the electromagnetic waves, which decreases depending on the distance. As a reference model of working environment, we setup the visual stimuli object on the computer that is a source of electromagnetic wave. The power spectrum distribution and the incidence of electroencephalogram was measured. The analysed data has shown that, with nano-processed textiles, ${\beta}$ wave does not appear very often where ${\beta}$ wave appears only to illustrate the stable states of human's body. However, as for the materials without nano processing, the ratio of ${\gamma}$ waves in the total level of electroencephalogram becomes higher in spite of short exposure to visual stimuli in work environment, which shows that the worker becomes stressed. The ${\beta}$ wave electroencephalogram of all materials is drawn in calcarine fissure of occipital lobe to show the convergent distribution, and stronger with block-processed Nano Silver Silk(NSS). The study based on the potential risks of human diseases such as physical fatigue by electromagnetic waves, and has shown that the application of Nano Silver textile for human uses require a proper particle size of it which would not penetrate cellular tissues, and a proper binder and binding treatment for it. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

절식보조음료 감로수(甘露水) 개발을 위한 선행연구: 증례보고 (A Pilot Study to Develop Gamrosu, a Modified Fasting Therapy Beverage: Case Series)

  • 오달석;김동환;신현택;신승우
    • 한방비만학회지
    • /
    • 제15권2호
    • /
    • pp.153-161
    • /
    • 2015
  • 감로수는 궁중음료인 제호탕과 동의보감의 생맥산에서 유래한 절식보조음료이다. 감로수를 이용한 절식요법의 보완과 향후 예정된 임상시험을 위한 임상지표 선정을 위해 정상인 1예, 비만인 1예, 고도비만인 1예를 대상으로 10일간의 절식요법 전, 후로 증례를 관찰하였다. 절식 후 체중은 평균 -6.3%, 체지방은 평균 -6.5%, 근육은 평균 -6.6% 감소하였고, 영양지표에 해당하는 RBC, hemoglobin, hematocrit, T-protein, albumin의 수치는 증가하였고 염증지표에 해당하는 hs- CRP, CRP, ESR, WBC 수치는 감소하였다. 절식 후에도 간기능, 신기능, 전해질수치는 정상수준을 유지하였고, 산화스트레스는 감소하였으며, 항산화력이 증가하는 결과를 나타내었다. 피로도는 절식 전보다 다소 개선되었고, 절식기 동안 불면 이외에 별다른 불편증상을 호소하지 않았다. 다만 혈중 빌리루빈수치 상승, 케톤 증가로 인한 체액의 약산성화는 절식요법을 시행함에 있어 추후 보완해야 할 사안이라 생각된다. 결론적으로 감로수의 디톡스 프로파일은 적합하며 관찰된 결과는 후속연구에 고려될 것이다.