• 한국추진공학회지
• /
• 제3권4호
• /
• pp.23-30
• /
• 1999

상안정화 질산암모늄(PSAN)의 열분해 특성에 대한 연구를 thermogravimetric analysis(TGA)를 사용하여 수행하였다. 본 연구에서는 질산칼륨과 산화아연이 상안정화제로 0%에서 8%사이에서 사용되었다. 열분해에 대한 속도론적 특성과 메카니즘들을 적분법을 사용하여 평가하였다. 활성화에너지(E)와 잦음율인자(A) 같은 열적 속도계수들은 상안정화제의 함량이 증가함에 따라 증가하였고, 분해 메카니즘 또한 변화되었다.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1113-1120
• /
• 1997

The 2, 4, 6 and 8mol% Y2O3 doped-ZrO2 powders (20 kinds) with the addedtion of Al2O3 upto 8wt% were prepared by coprecipitation method using the zirconium oxyacetate, yttrium chloride and aluminum nitrate as starting materials. The coprecipitated powders were characterized by XRD, TG-DTA, FT-IR and SEM. The sintering properties of zirconia-alumina composites prepared by 2YSZ and 8YSZ powders containing various Al2O3 contents were also investigated. With increasing the yttria stabilizer contents, the amount of exothermic heat for zirconia crystallization decreased. And it was confirmed that the crystallizing temperature of coprecipitated zirconia powders increased and the crystallization process occurred in a wide temperature range, as Al2O3 content increased in 8YSZ.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2005

Polypropylene as a matrix has been used for wood polymer composites(WPC). In preparing WPC, the coupling agent, Polypropylene grafted Maleic Anhydride(PP-G-MA) was used in order to obtain a good interfacial bonding force between matrix and fillers and dispersion of wood powders. In this study, the effects of wood powder contents and water absorption on the mechanical properties were experimentally investigated. The tensile strength and flexural strength of composites reached its peak value when the wood powder content was around 60 wt%. However, the peak value of the impact was observed about 30 wt% of wood powder content. The tensile strength and flexural strength increase with increasing the wood power contents. But the impact strength decrease with increasing the wood powder contents. The slight change was observed with the water absorption in the WPC. The optimal condition of the compositions such as Anti-oxidant and UV stabilizers for the outdoor application was suggested in this research.

• 분석과학
• /
• 제17권2호
• /
• pp.98-107
• /
• 2004

본 연구에서는 $^1H$ NMR 분광분석법 및 HPLC를 이용하여 자동차 부품에 사용된 아크릴 코팅의 성분 및 함량을 분석하였다. $^1H$ NMR 분석 결과 아크릴 코팅은 88.40 wt%의 PMMA, 7.05 wt%의 MMA 및 2.36 wt%의 allyl methacrylate를 포함하고 있다. 또한, 고분자 첨가제로 벤조트리아졸 (Hisorb 328) 및 oxanilide 광안정제, BHT 및 DMP가 $^1H$ NMR 스펙트럼에서 확인되었고 정량적으로 측정되었다. 그러나, Bondapak C18 칼럼, 메탄올 이동상, PDA 검출기를 사용한 역상 HPLC 분석을 통해서는 두개의 광안정제만이 확인되었다. 두 광안정제의 함량은 UV-Vis 흡광광도계를 이용한 정량분석법을 통해 측정되고 NMR 분석 결과와 비교하였다. $^1H$ NMR 스펙트럼으로부터 얻은 분석 정보들이 HPLC에서 얻는 것들 보다 우수하였다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.518-523
• /
• 2010

In this study, partially stabilized zirconia was synthesized using a chemical $Y_2O_3$ stabilizer and hydrothermal method. First, $YCl_3-6H_2O$ and $ZrCl_2O-8H_2O$ was dissolved in distilled water. Y-TZP (a $Y_2O_3$-doped toughened zirconia polycrystalline precursor) was also prepared by conventional co-precipitates in the presence of an excess amount of $NH_4OH$ solution under a fixed pH of 12. The Y-TZP precursors were filtered and repeatedly washed with distilled water to remove $Cl^-$ ions. $ZrO_2$-Xmol%$Y_2O_3$ powder was synthesized by a hydrothermal method using Teflon Vessels at $180^{\circ}C$ for 6 h of optimized condition. The powder added with the Xmol%- $Y_2O_3$ (X = 0,1,3,5 mol%) stabilizer of the $ZrO_2$ was synthesized. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens of $33mm{\times}8mm{\times}3$ mm for three-point bend tests were used in the mechanical properties evaluation. A teragonal phase was observed in the samples, which contains more than 3 mol% $Y_2O_3$. The $3Y-ZrO_2$ agglomerated particle size was measured at $7.01{\mu}m$. The agglomerated particle was clearly observed in the sample of 5 mol % $Y_2O_3-ZrO_2$, and and the agglomerated particle size was measured at 16.4 um. However, a 20 nm particle was specifically observed by FE-SEM in the sample of 3 mol% $Y_2O_3-ZrO_2$. The highest bending fracture strength was measured as 321.3 MPa in sample of 3 mol% $Y_2O_3-ZrO_2$.

• 한국지반공학회논문집
• /
• 제16권2호
• /
• pp.79-89
• /
• 2000

The application of stabilization method has increased because of short construction periods, no environmental problems with dumped and replaced soil, assurance of required strength and economical effect with mid to small size construction. The unconfined and triaxial(UU-condition) compression tests were executed with each mixing sample for the study of the improvement effects and the effect of design-parameters by the stabilization methods. Three typical stabilizers, which are representative in Korea, were applied in this study, and three common soils(very soft clay, general weathered soil, common clay), which are common in Korea, were used in this study. In this study, the effect of engineering factors(soils, stabilizers and water contents, etc.) which are important parameters for the improvement effects of mixed ground by stabilizers, was analyzed. As results, the tendencies of design-parameters(unconfined compression strength, deformation modulus and strength parameter) are presented and the criteria of the application of stabilization methods are suggested.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.714-719
• /
• 1996

For the fabrication of the circuits, contact or terminal areas are usually coated with nickel and gold. Usually, diluted palladium solution is applied to initiate electroless nickel plating on the copper circuits. However, the trace amounts of palladium remains on the resin and it causes the extraneous deposition. We confirmed that selectivity was greatly improved by the treatment with the strong reducing agents such as SBH or DMAB. Bondability was greatly influenced by the contents of phosphorus in the deposited nickel. Stabilizers in the electroless gold plating were also influenced the bonding strength. The baths containing cupferron or potassium nickel cyanide as a stabilizer showed superior bondability. The gold deposits having strong orientation with Au(220) and Au(311) showed good bond ability.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• Elastomers and Composites
• /
• 제34권3호
• /
• pp.199-211
• /
• 1999

본 연구에서는 PVC졸 실란트에 요구되는 접착성 개선제에 대한 연구의 일환으로 에폭시가 2개(epoxy A)인 것과 4개인 것(epoxy B)을 각각 첨가하였을 때 PVC졸 실란트의 제반물성에 미치는 영향을 연구하였다. PVC졸은 디옥틸프탈레이트(DOP)로 PVC를 가소화시켜 제조된 것이다. 에폭시 수지 A의 경우는 에폭시 수지 함량이 증가할수록 PVC졸 실란트의 점도가 감소하였고, 첨가제 $CaCO_3$가 첨가된 에폭시 PVC졸 실란트의 점도는 에폭시 수지 종류에 관계없이 $CaCO_3$ 함량이 증가할수록 점도가 증가했다. $45^{\circ}C$ 열 수조상에서 점도 변화는 에폭시 수지 종류 또는 함량에 관계없이 점도가 감소하였는데 이는 에폭시가 PVC졸 실란트에 안정제의 역할을 한 것으로 판단되었고, $CaCO_3$가 함유된 경우는 그 함량이 증가할수록 점도가 증가한 것은 충진효과로 판단되었다. 에폭시가 첨가된 PVC졸 실란트의 열적 안정성은 다소 개선되었다. 인장 강도는 에폭시 수지 A의 함량이 낮은 경우는 인장 강도 및 신율이 증가하고, 높은 함량에서는 오히려 감소했다. 에폭시 수지 B의 경우는 에폭시 함량이 증가할수록 인장 강도와 신율은 증가하는 현상이 보였다. 충진제 함량이 많을수록 충진제 함량이 적은 PVC졸보다도 인장 강도는 낮은 현상을 보였다. 전기적 특성에서는 tan ${\delta}$의 값이 0.1정도($0.1{\pm}0.04$)이고 비유전율 ${\epsilon}_r$ 값은 0.5정도($0.5{\pm}0.04$)이므로 좋은 절연체로 판단되었다.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.8-15
• /
• 2014

A novel antibacterial paper coated with chitosan-based silver (Ag) nanocomposite prepared by green synthesis has been investigated for a wide range of application in food, agricultural and medical packaging. Green synthesis of Ag nanoparticles (AgNPs) was carried out by a chemical reaction involving a mixture of chitosan-silver nitrate (AgNO3) in an autoclave at 15 psi, $121^{\circ}C$, for 15-120 sec. AgNPs and their formation in chitosan were confirmed by both UV-Vis spectroscopy and transmission electron microscope (TEM). Fourier transform infrared spectroscopy (FTIR) study showed that free amino groups in chitosan act as an effective reductant and AgNPs stabilizer. Antibacterial test of coated paper with as-prepared chitosan-AgNPs was performed qualitatively against E. coli based on the formation of halo zones around coated papers and it was shown to be effective in suppressing the growth of E. coli with increasing Ag contents in coating layer.