• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.161-164
• /
• 1988

The purpose of this paper is to propose a simple firmware realization of PCM framing system, which exploits LSI memories for performance improvement and hardware simplification. The proposed system simply consists of a tapped delay line for simultaneous observation of in framing-bits and ROM programmed sequence controller for framing process. Perpormance analyses are made in terms of misframe interval, sync-loss-detection time and reframe time. The proposed strategy proved to be significantly better in reframe time, stability and hardware implementation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.864-866
• /
• 2003

In this paper, the improvement of control performance for a magnetic levitation system is presented. The model of a single-magnet system with rail is derived. As a conventional controller, PID controller is designed and implemented. This controller has a narrow stability margin due to low-order controller structure so that it cause unstability for a flexible rail. So to improve the control performance and stability margin, a robust controller as a new controller is designed and implemented using a VME-based digital controller. As a result, the controller performance of the new designed controller is better than that of the conventional controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.365-367
• /
• 2000

Recently, the power supply equipments have tendency to take multiple feedback loop paths. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$ is nearly 1/5 of switching frequency $f_s$ from the experimental result with frequency response analyzer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.198-200
• /
• 2004

The purpose of this paper is to explain improvement of voltage stability using STATCOM by active power margin and reactive power margin. STATCOM, the representative shunt compensator of the FACTS devices, is faster than machinery compensator in response speed and has the advantage of the small scale because it doesn't use reactor or large capacitor. In this paper, we investigated the compensatory effect of the STATCOM that applied to KEPCO system.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.171-179
• /
• 2001

The purpose of this paper is the derivation and development of the new definitions and methods for the new estimation of robustness for the systems having structured uncertainties. This proposition adopts the theoretical analysis of the Lyapunov direct methods, that is, the sign properties of the Lyapunov function derivative integrated along finite intervals of time, in place of the original method of the sign properties of the time derivative of the Lyapunov function itself. This is the new sufficient criteria to relax the stability condition and is used to generate techniques for the robust design of control systems with structured perturbations. The systems considered are assumed to be nominally linear, with time-variant, nonlinear bounded perturbations. This new techniques demonstrate the improvement of robustness bounds from the numerical results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 지반환경 및 준설매립에관한 학술세미나
• /
• pp.96-109
• /
• 2001

Land was reclaimed at the waterfront in the Pluit area of Jakarta for a 90ha residential-cum-recreational development. The reclamation works involve construction of permanent and temporary dykes, fill placement, soil improvement, dredging of internal canals and marina, and construction of canal revetment. The site lies on 16m to 18m thick soft seabed deposits. Settlement of the reclaimed areas will result as a consequence of consolidation of the soft underlying sediments. In order to reduce post-construction settlement to within acceptable levels, a system of vertical drains and preloading was adopted. This paper describes the use of Fibredrain, a prefabricated vertical drain made of jute and coir fibres developed at the National University of Singapore, in the soil improvement works and a secondary use in the construction of perimeter dykes for the reclamation works. The construction of the perimeter dyke must be carried out in such a way that slope stability is on ensured. Bamboo rafts and bamboo clusters with Fibredrain inserted, and stage construction were employed to improve stability during the dyke formation for the Pantai Mutiara project.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.68-75
• /
• 2013

This paper presents a scheme to improve transient stability using Newton's Approach for generation rescheduling. For a given contingency, the energy margin and sensitivities are computed. The bigger energy margin sensitivity of generator is, the more the generation of the generator effects to the transient stability. According to energy margin sensitivity, the control variables of generation rescheduling are selected. The fuel cost function is used as objective function to reallocate power generation. The results are compared to the results of time simulation to show its the effectiveness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1126-1131
• /
• 2007

This paper presents unified chassis control (UCC) to improve the vehicle lateral stability. The unified chassis control implies combined control of active front steering (AFS), electronic stability control (ESC) and continuous damping control (CDC). A direct yaw moment controller based on a 2-D bicycle model is designed by using sliding mode control law. A direct roll moment controller based on a 2-D roll model is designed. The computed direct yaw moment and the direct roll moment are generated by AFS, ESP and CDC control modules respectively. A control authority of the AFS and the ESC is determined by tire slip angle. Computer simulation is conducted to evaluate the proposed integrated chassis controller by using the Matlab, simulink and the validated vehicle simulator. From the simulation results, it is shown that the proposed unified chassis control can provide with improved performance over the modular chassis control.

• Nuclear Engineering and Technology
• /
• 제35권1호
• /
• pp.45-54
• /
• 2003

A hyperbolic two-phase, two-fluid equation system developed in the previous work has been implemented in an existing nuclear safety analysis code, MARS. Although the implicit treatment of interfacial pressure force term introduced in momentum equation of the hyperbolic equation system is required to enhance the numerical stability, it is very difficult to implement in the code because it is not possible to maintain the existing numerical solution structure. As an alternative, two-step approach with stabilizer momentum equations has been selected. The results of a linear stability analysis by Von-Neumann method show the equivalent stability improvement with fully-implicit solution method. To illustrate the applicability, the new solution scheme has been implemented into the best-estimate thermal-hydraulic analysis code, MARS. This paper also includes the comparisons of the simulation results for the perturbation propagation and water faucet problems using both two-step method and the original solution scheme.

• 대한화학회지
• /
• 제19권1호
• /
• pp.50-52
• /
• 1975

潤滑再生油의 酸化安定性이 向上되는 機構를 알기 爲하여 第一報에서 만든 試料와 輕油을 混合한 것과 輕油에다 添加劑(알킬벤젠과 페놀형물질)를 混合한 試料의 酸化安定性能 試驗을 하여 內然機關에서 使用한 潤滑廢油의 再生油가 酸化安定性이 向上되었음을 알았고 使用途中 芳香族化合物, 特히 페놀型 有機物의 生成에 基因한다는 結論을 얻었다.