• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.18-25
• /
• 1998

G $d_{0.2}$C $e_{0.8}$ $O_{1.9}$(CGO) for electrolyte and L $a_{0.5}$S $r_{0.5}$Mn $O_3$(LSM50) for cathode in Solid Oxide Fuel Cells(SOFC) were synthesized by citrate process. Specimens were prepared with sintering temperatures at 110$0^{\circ}C$, 120$0^{\circ}C$ and 130$0^{\circ}C$, which were fabricated by slurry coating with citric acid contents. Interfacial resistance was measured between cathode and electrolyte using AC-impedance analyzer. With various citric acid content, the degree of agglomeration for the initial particles changed. Also sintering temperature changed the particle size and the degree of densification of cathode. Factors affecting the interfacial resistance were adherent degree of the electrolyte and cathode, distribution of TPB(three phase boundaries, TPB i.e., electrolyte/electrode/gas phase area) and porosity of cathode. By increasing the sintering temperature, particle size and densification of the cathode were increased. And then, TPB area which occurs catalytic reaction was reduced and so interfacial resistance was increased.sed.sed.d.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.224-230
• /
• 1999

$SrBi_{2x}Ta_2O_9$ (SBT) thin films were prepared on platinized silicon substrates by MOD process, and their ferroelectric and leakage current characteristics were investigated. The grain size of the MOD derived SBT films increased with increasing the BI/Ta mole ration. Although the SBT films with x of 0.8~1.2 were composed of the equiaxed grains, the elongated grains were also observed for the SBT films with x of 1.4 and 1.6. The SBT film with x of 1.2 exhibited the optimum ferroelectric properties of 2PR : 9.79 $\muC/\textrm{cm}^2$ and Ec : 24.2kV/cm at applied voltage of 5V. The leakage current density of the SBT films increased with increasing the BI/Ta mole ratio. With post annealing process, 2Pr and $E_c$of the SBT film with x of 1.2 increases 11.3 $\muC/\textrm{cm}^2$ and 39.6kV/cm, respectively. decrement of the leakage current density by post annealing process increased remarkably with increasing the Bi/ta mole ratio, and the SBT film with x=1.6 exhibited the lowest leakage current density after post annealing process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.107-114
• /
• 2022

Carboxymethyl cellulose/poly(ethylene glycol) (CMC/PEG) hydrogels crosslinked with citric acid (CA) are synthesized to evaluate the effect of CMC molecular weight (Mw), PEG and CA concentration on the optical property, swelling rate (SR), degradation rate (DR), and cytotoxicity and cell proliferation of hydrogels. For crosslinked CMC/PEG hydrogels, the FT-IR peak intensity associated with hydroxyl groups decreases due to PEG intercalation (esterification crosslinking) between CMC chains in a similar manner as the concentration of CA crosslinker increases. Crosslinked CMC (Mw = 90,000)/PEG hydrogels with 10 % CA dissolve regardless of PEG content. However, the SR of the CMC (Mw = 250,000)/PEG hydrogels decrease from 4923 % to 168 % with increasing PEG and CA concentrations from 0 to 20 % and from 0 to 25 %, respectively. As the Mw of CMC increases, the DR of the hydrogel is greatly improved. CMC (Mw = 250,000)/PEG10 hydrogels with 10 % CA exhibit the optimum properties of high absorbing capacity (3,200 %) with moderate DR (54 %), stiffness (1.39 ± 0.19 GPa), and cell viability (94.8 ± 1.3 %). CA-crosslinked CMC/PEG hydrogels are highly suitable for wound dressing or personal care applications due to their non-toxicity, good cell proliferation, SR, and mechanical properties.

• Journal of Korea Foundry Society
• /
• v.37 no.6
• /
• pp.193-198
• /
• 2017

In this study, volumes of shrinkage and porosity of A356.2 alloys during casting were analyzed as a function of melt temperature, pouring diameter, mold temperature, and Sr content. The temperature of the melt barely affected the shrinkage and porosity formation. The pouring diameter determined the pouring rate, and it was proportional to the shrinkage, yet no relationships with the density of porosity were observed. When the mold was heated at $400^{\circ}C$, shrinkage and porosity in the alloy increased above the one in the mold without heating. However, the mold without heating experienced interior shrinkage and the porosity was mainly distributed near interior shrinkage. The addition of Sr to the melt resulted in more shrinkage and less porosity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.338-341
• /
• 2002

$(Ba_{1-x}Sr_{0.4}Ca_x)TiO_{3}$ (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. Their structural and dielectric properties were investigated with variation of composition ratio and $Al_{2}O_{3}$ doping contents. As results of the X-ray diffraction and microstructure analysis, the grain size of BSCT thick films was decreased with increasing $Al_{2}O_{3}$ amount. The thickness of BSCT thick films by 4-coating/drying is about $110{\sim}120{\mu}m$. The tunability increased with decreasing Ca content, and the BSCT(50/40/10) specimen doped with 1.0wt% $Al_{2}O_{3}$ showed the highest value of 12.94% at 5kV /cm.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.115-118
• /
• 1994

Samples of ($Bi_{2-x}Sb_x)PbSr_2Ca_2Cu_3O_y$, compositions with x=0.0, 0.1, and 0.2 were prepared by solid-state reaction. The solubility of Sb into the 2223 phase is lower than 0.05 for the ratio of Sb/Bi. The lack of stability of the Sb-substituted $Bi_2O_2$ double layers is likely to cause the solubility low. There is no great dependence of lattice parameters on the Sb-content, and bonds around the square-pyramidal Cu atom are not affected by the $Sb^{3+}$ ion substituted. The superconducting transition temperature of this system is decreased gradually with increase of Sb, which is tentatively attributable to the perturbation of the Bi 6p-O 2p band and/or to the low volume fraction of the 2223 phase.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.1
• /
• pp.24-29
• /
• 2003

In the previous reports, the authors isolated two strains of marine bacteria, Shewanella sp. SR-14, which has Chaetonros sp. growth inhibition activity, and Vibrio alginolyticus, that did not affect growth of the alga. In the present study, fatty acid compositions of diatoms, Chaetoceros calcitrans and Skeletonema costatum, and marine bacteria, Shewanella sp. SR-14 and V. alginolyticus, were analyzed. Changes of fatty acid composition in the diatoms grown with the marine bacteria were also determined. Major fatty acids of Sbewanella sp. SR-14 were 16:1n-7 $(29.4\%)$ and 16:0 $(19.2\%)$ during incubation in peptone broth at $20^{\circ}C$ for 3 days. The compositions of V. alginolyticus detected were 16:0 $(23.7\%),$ 16:1n-7 $(27.7\%)$ and 18:1n-7 $(21.0\%).$ C. calcitrans consisted of 16:1n-7 $(33.3\%),$ 16:0 $(27.1\%)$ and 14:0 $(12.1\%).$ S. costatum mainly contained 16:1n-7 $(28.9\%),$ 16:0 $(21.6\%)$ and 20:5 $(19.8\%).$ When halves of cell numbers of C. calcitrans were moribund cells by Shewanella sp. SR-14, the C. calcitrans and S. costatum simultaneously cultured with the bacteria were harvested by filtration with GE/D glass microfibre filter. In the fatty acid composition of both diatoms, saturated fatty acid contents in both diatoms grown with Shewanella sp. SR-14 were decreased, but unsaturated fatty acid contents were increased. The differences were greater in C. calcitrans than those in S. costatum. During the growth of diatoms with V. alginolyticus, C. calcitrans showed increase of saturated fatty acid contents and decrease of unsaturated fatty acid contents; however, S. costatum did not show sharp difference in fatty acid content. In this study, Shewanella sp. SR-14, which showed growth inhibition activity against C. calcitrans, influenced on the changes of fatty acid contents in the diatom. It was suggested that increased unsaturated fatty acid was synergistically activated algal growth inhibition activity of Shewanella sp. SR-14.

• Economic and Environmental Geology
• /
• v.25 no.2
• /
• pp.133-143
• /
• 1992

Ulsan granite is plotted mainly in the region of syeno-granite of the Streckeisen diagram, which consists with those of iron related granites in the area of Kimhae-Mulgum, while Chindong granites and Yucheon-Eonyang granites are plotted in the regions of granodiorite-diorite and monzo-granite, respectively. These granites show a differentiation trend of calc-alkaline magma, and their magmatic evolution from intermediate to acidic rocks is consistant with the general crystallization path of the Cretaceous granitic rocks in the Gyeongsang basin. The difference index (D.I.) is 70~90 for Ulsan granite, which lies between 35~80 of Chindong granites and 85~95 of Yucheon-Eonyang granites. These granites are distinguishable from each other by variation patterns of chemical elements. For instance, there is clear difference in content of some major and trace elements between Ulsan granite and Cu-related Chindong granites: Ulsan granite has high content of K (2.68%) and Ba (636 ppm), and low content of Ca (1.07%), Mg (0.50%) and Sr (185 ppm), whereas Chindong granites has less content of K (1.62%) and Ba (382 ppm), and higher content of Ca (3.75%), Mg (1.42%) and Sr (405 ppm). However, the content of Ulsan granite overlaps partly those of Yucheon-Eonyang granites, which are apparently dividable from Chindong granites. There is an usual trend that Cu content is high in Chindong granites of Cu province and Zn content is higher in Yucheon-Eonyang granites of Pb-Zn province. But it is unusual that Cu and Zn are higher in Ulsan granite (34 ppm, 74 ppm) than in Chindong granites (15 ppm, 22 ppm) and Yucheon-Eonyang granites (14 ppm, 43 ppm). This may be due to the reason that Ulsan granite is productive and Cu-Zn minerals are associated with iron ores. Productive Chindong granites in Haman-Gunbug area and Yuchon-Eonyang granites near ore deposits have higher content of Cu and Zn than Ulsang granite. Therefore, it is expected that chemical variation patterns of granites are applicable to distinguish mineral commodity of ore deposits (iron, copper, or lead-zinc) related with the granites in the Gyeongsasng basin.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.137-140
• /
• 1999

Effects of annealing and impurities on the superconducting properties were investigated by the magnetization measurement in $Bi_2Sr_2CaCu_2O_{8+{\delta}}(Bi2212)$ single crystals grown by flux method. It has been found that the superconducting properties are affected by Mg and Al impurities remarkably. The transition temperature$(T_c)$ has been lowered by the impurity of Mg. However, the diamagnetism is remarkably increased in an annealed crystal grown in MgO crucible compared to that in $Al_2O_3$ crucible. The content of Mg impurity can not be considered as a principal parameter for the decay of superconducting properties probably because the diamagnetism is remarkably improved in annealed crystal containing Mg.

• Journal of the Korean Chemical Society
• /
• v.39 no.10
• /
• pp.806-811
• /
• 1995

The electrical properties for $(Ba,Sr)_{1-x}Y_xTiO_3$(x=0.001∼0.009, BSYT) with a positive temperature coefficient of resistivity(PTCR) effect were investigated. The BSYT powder was prepared by oxalate coprecipitation method. It was found that the large PTCR effect was appeared up to 0.3 mol% and decreased above 0.5 mol% of the yttrium concentration. The plot of temperature vs. $1{\varepsilon}$m(T) above Curie temperature($T_c$) was agreed with Curie-Weiss law. The potential barrier calculated from measured resistivity and dielectric constant of specimens was high up to 0.3 mol% and reduced above 0.5 mol% of yttrium concentration as the curve of PTCR effect.