• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.139-149
• /
• 2020

Piles are widely used in structural foundations of engineering projects. However, the deformation of the soil around the pile caused by driving process has an adverse effect on adjacent existing underground buildings. Many previous studies have addressed related problems in sand and saturated clay. Nevertheless, the failure mechanism of pile driving in unsaturated soil remains scarcely reported, and this issue needs to be studied. In this study, a modeling test system based on particle image velocimetry (PIV) was developed for studying deformation characteristics of pile driving in unsaturated silt with different water contents. Meanwhile, a series of direct shear tests and soil-water characteristic curve (SWCC) tests also were conducted. The test results show that the displacement field shows an apparent squeezing effect under the pile end. The installation pressure and displacement field characteristics are sensitive to the water content. The installation pressure is the largest and the total displacement field is the smallest, for specimens compacted at water content of 11.5%. These observations can be reasonably interpreted according to the relevant unsaturated silt theory derived from SWCC tests and direct shear tests. The variation characteristics of the soil displacement field reflect the macroscopic mechanical properties of the soil around the pile.

• The Journal of Pediatrics of Korean Medicine
• /
• v.29 no.4
• /
• pp.67-76
• /
• 2015

Objectives The purpose of this review is to investigate the domestic and foreign studies of pediatric Chuna treatment and propose the directions of future studies and clinical applications. Methods We searched for the study at RISS, KISS, DBPIA, Pubmed, CNKI by keywords, '추나', 'Osteopathic', 'Chiropractic', 'Manipulation', '推拿', '導引', '按摩', After 2010. Results 1. Selected 3 domestic studies were categorized as 1 survey study and 2 case reports. Selected 41 foreign studies from Pubmed were categorized as 15 systemic reviews, 8 survey studies, 12 case reports and 6 control studies. Selected 82 foreign studies from CNKI were categorized as 10 systemic reviews, 22 case reports and 50 control studies. 2. 2 clinical domestic studies researched on idiopathic Scoliosis. The foreign clinical studies from Pubmed are 18 cases, and those studies were categorized into Premature baby care (3), Infant colic (2), ADHD (2), Congenital talipes equinovarus (1), Somatic dysfuntion (1), Nonsynostotic occipital plagiocephaly (1), Conversion disorder (1), Lower back pain (1), Chronic bilateral dorsal foot pain and stiffness (1), plantar fasciitis (1), Migraine headaches (1), Cyclic vomiting syndrome (1), Acute otitis media (1) and Cerebral palsy (1). The other 72 foreign clinical studies were from CNKI, and they studied 39 different diseases. Systematically, they studied about digestive diseases (25), respiratory diseases (20), fever (6), musculoskeletal diseases (5), nervous system diseases (5), dermatology diseases (2) and other disease states. The Chuna treatment was used in variety of studies. 3. 2 clinical domestic studies adopted techniques of Osteopathy Chuna. The foreign clinical studies from Pubmed adopted techniques of Osteopathic manipulation (10) and Chiropractic manipulation (8). The other foreign clinical studies from CNKI adopted techniques of Acupressure (69), Abdominal manipulation (23), Spinal manipulation (21), Thoracic manipulation (11), Traction manipulation (2), Muscular manipulation (2), Squeezing Sha manipulation (1), Spine correction (1), Joint manipulation (1) and Fascia manipulation (1). Conclusions In addition to musculoskeletal disorders, variety of pediatric diseases could be treated with Chuna treatment instead of acupuncture.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.331-338
• /
• 2000

To study on the actual condition of care label attached to clothing and consumers' perception, 250 summer clothes sold at department store-blouse, trousers, one-piece dress, knit cardigan and skirt-were investigated during July 2000. In addition, a questionnaire was administered to 192 women in Taegu during August. The fiber contents of surveyed clothes were polyester 100% & polyester blend (26%), rayon 100% & rayon blend (18%), cotton 100% & cotton blend (17%), wool 100% & wool blend (14%) and others. All clothes surveyed were attached care label and the signals showed on care labels were 4~6 kinds about cleaning, squeezing, drying, bleaching, and ironing methods. 92% of clothes had to be dry-cleaned and only 8% could be wet-cleaned. Considered the surveyed clothes were for summer which needs frequent washing and the clothing items, the number of clothes had to dry-cleaned were too many. The bleaching instructions were no chlorine bleach (74%), no bleaching (21%) and others. The ironing instructions were cool ironing ($80{\sim}120^{\circ}C$) with cover (24%) and warm ironing ($140{\sim}160^{\circ}C$) with cover (69%) primarily. The drying instructions was dry on a hanger in the shade (54%) and 38% had no signal or incorrect signal. The properties of summer clothes considered important by consumers were wrinkled hardly, hand-washable, machine-washable, needed no iron and etc. Actually most of summer clothes were hand or machine-washed. Also, the majority of respondents felt inconvenient to have to dry-clean summer clothes. More than 80% respondents looked over care label and fiber content label before buying clothes. However most of respondents did not followed that instructions exactly and thought care label instructions were not correct. Considered this results, the suppliers have to make efforts to attach correct and appropriate care label which furnish the correct information to consumers.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.56-63
• /
• 2012

Due to the development of construction technology, there is a considerable increase in the number of skyscrapers in the world. Accordingly, there are rapid growing requests about maintenance systems such as cleaning, painting, and monitoring the processes of facade in highrise buildings. However, it is extremely dangerous working the walls of high-rise buildings, and crashes from buildings have accounted for large proportion of constructional accidents. An alternative solution must be developed with the commercialization of automatic robot systems. For the last decade, interest in developing robots for cleaning and maintenance in facade of highrise buildings has continuously increased. The use of automatic robot systems can be expected to reduce accidents and decrease labor costs. In this paper, we propose a new kind of cleaning mechanism. We have designed and manufactured various cleaning tools for different types of facades with economic commercialization. The cleaning cycle, size, and intensity will be determined by economic constraints as well. The final goals are to design and manufacture tools and robots that can clean facades efficiently and rapidly even in dangerous places. The cleaning tool systems consist of nozzles, brush rollers, and squeezing devices. Furthermore, these tools and robots perform each process utilizing the systems of built-in guide types and gondola types for building maintenance. The performance of the proposed cleaning tools is evaluated experimentally; however additional study should be necessary for safer and more stable commercialization.

• Journal of Welding and Joining
• /
• v.33 no.2
• /
• pp.56-61
• /
• 2015

IRW(Inverter Resistance Welding) process and DSW(Delta-spot welding) process for dissimilar materials of DP590 and Al5052 were performed to evaluate the welding quality and mechanical properties. IRW experiment was carried out with changing the welding current. The other welding parameters such as pressure force, weld time, squeezing time and holding time were fixed. On the anther hand, DSW experiment was performed using the process tape at welding current of 11.5kA. The other conditions were same as IRW conditions. The various testes such as shear tensile strength, nugget diameters, EDS, SEM and cross-sectional observation for weld zone was performed. As a result, IMC(Inter Metallic Compound) thickness at 11.5kA was thinner than those of 9.5kA and 10.5kA conditions. In addition, thined IMC layer was observed when high electric current apply to the materials(DP590 and Al5052) in a short time throught dissimilar resistance spot welding controling welding conditions. The relationship between the thickeness of IMC and current intensity was after discussed.

• Journal of Nutrition and Health
• /
• v.27 no.2
• /
• pp.141-152
• /
• 1994

The effects of feeding diets with different fatty acids on the composition of fatty acids and vitamin E status in maternal milk & serum and pup's serum were studied. Dietary fats(10% by wt) include on oil(CO), soybean oil(SO), perilla seed oil(PO : about 60% , C18 : 3 $\omega$3) and fish oil(FO : rich in C20 : 5$\omega$3, eicosapentaenoic acid = EPA & 22 : 6$\omega$3, docosahexaenoic acid = DHA), Sprague-Dawley rats weighing 200-250g, were fed experimental diets from pregnancy through lactation period. Maternal milk was obtained by gentle squeezing after 30 minutes of oxytocin(0.2 IU, intraperitoneal) injection. The fatty acid compositions of milk and serum were analyzed at day-2 and day-15. The concentrations of vitamin E in maternal milk and serum and pup's serum were also analyzed. The groups of CO, SO and PO which had no DHA in their diet, contained DHA in their milk, The rations of EPA+DHA/arachidonic acid(AA) were higher in PO group than those in either CO or SO group. This seemed to be due not only to more conversion from C18 : 3$\omega$3 to C20 : 5$\omega$3 and C22 : 6$\omega$3 but also to inhibition of C18 : 2$\omega$6 conversion to C20 : 4$\omega$6. More DHA was found in day-2 milk than in day-15 milk. It was also noted that milk contained more DHA was found in day-2 milk than in day-15 milk. It was also noted that milk contained more DHA than serum and this difference was larger in day-2 than in day-15 milk. Even though the concentrations of vitamin E both in maternal serum and milk were lower in PO and FO groups fed highly unsaturated fat than in CO or SO groups, pup's serum did not show a significant difference among all the experimental groups indicating that the pups man secure their essential nutrients by the biomagnification mechanism.

• Advances in pediatric surgery
• /
• v.5 no.2
• /
• pp.103-110
• /
• 1999

To estimate the normal anal canal pressure in neonates, anal manometry was performed in 46 normal babies less than 6 days of age. Twenty-eight of the subjects were boys and 18 girls. All the subjects passed meconium within 24 hours after birth. Birth weights were above 2.4 kg. There were no sexual differences in birth weight, birth height, gestational age, postnatal age, or Apgar score (p<0.05). The mean manometry values were; anal sphincter length $18.6{\pm}3.9$ mm, high pressure zone (HPZ) $9.2{\pm}3.6$ mm, vector volume $2027.2{\pm}2440.7$ mmHg2cm, maximum pressure $42.3{\pm}17.4$ mmHg, and position of the maximum pressure $6.0{\pm}22.4$ mm. Only the HPZ of boys was longer than those of girls (p=0.005). In squeezing state, HPZ and the position of maximun pressure were not changed from resting state. HPZ, vector volume, and maximum pressure in boys were higher than those in girls. As the birth weight increased, the anal sphincter length (p=0.001) and the HPZ increased (p=0.047). The resting pressures of the anal canal were evaluated in three portions; /23 upper portion, $12.8{\pm}8.6$ mmHg, middle portion, $20.3{\pm}10.8$ mmHg, and lower portion, $26.1{\pm}12.9$ mmHg. These normal values may serve as guidelines for the evaluation, diagnosis and treatment of neonatal anal diseases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.668-674
• /
• 2001

An experimental study was performed for two types of co-axial cylindrical shell structures in order to establish the relationship between in-air dynamic characteristics and in-water ones and to observe hydrodynamic mass effects on their mode shapes when submerged. The outer cylinders are prepared with two kinds to get more insights on the fluid-structure interaction phenomena: one is flexible, which means that the outer cylinder has almost same stiffness as the inner one, and the other is a rigid one whose stiffness is more than ten times of the inner one's(it might be regarded as the scaled-down model of the reactor internals). The finite element. analyses were also implemented to support the experimental results. The results show that the natural frequencies of a co-axial cylindrical shell structure in water are remarkably lower than those in air due to the fluid mass effects. In case of the flexible-to-flexible cylinders, there exist in-phase and out-of-phase mode shapes and they are affected by the annular gap between the. co-axial cylinders. For the in-phase mode the in-water natural frequency decreases exponentially as the gap increases, while it slightly increases in case of the out-of-phase mode due to the squeezing effect of the gap fluid. In the flexible-to-rigid case, the normalized natural frequency(in-water frequency/in-air one) of the inner cylinder(core barrel model) ranges between in-phase and out-of-phase mode frequencies of the flexible-to-flexible co-axial cylindrical structure having identical dimensions. Also the normalized natural frequency of the inner cylinder of the flexible-to-rigid one moves from near of the in-phase mode frequency into the out-of-phase mode value of the flexible-to-flexible case as circumferential mode number(n) increases.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.4
• /
• pp.541-550
• /
• 2012

PURPOSE: The purpose of this study was compare quadriceps femoris muscle activity while performing wall slide squats of four methods. METHODS: Forty subjects, with no history of patellofemoral pain, quadriceps injury, or other knee injury volunteered for this study. Muscle activation of the vastus medialis obliquus, rectus femoris, vastus lateralis muscles were recorded while subjects performed 10 consecutive wall slide squats. Subjects performed the wall slide squats during four different methods: (1) basic wall slide squat, (2) keep back upright against fitness ball, (3) standing of unstable surface, (4) squeezing ball between both knees. Statistical analysis were accomplished by utilizing the one-way ANOVA(Bonferroni's post-hoc test) by SPSS 20.0 program. Significance level was set at p<.05. RESULTS: Muscle activations induced wall slide squats of four methods compared and results showed that there was significant difference only in vastus medialis obliquus and rectus femoris but there was no significant difference in vastus lateralis. The vastus medialis obliquus was significantly different only keep back upright against fitness ball at post-hoc test. The rectus femoris was significantly different keep back upright against fitness ball and standing of unstable surface at post-hoc test. CONCLUSION: Based on these results, we conclude that quadriceps femoris muscle activations are differenced by performing wall slide squats of four different methods in healthy subjects. These data suggest that for quadriceps muscle strengthening, exercise professionals can perform the wall slide squats by altering several task variables. Further research is needed to determine the exact mechanism by which quadriceps function is altered.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.561-566
• /
• 2017

Butt-fusion welding process is used to join the polymeric pipes. Recently, some researchers suggest the curved surface to enhance a welding quality. We investigated how curved welding surface affects heat and flow behaviors of polymer melt during the process in 2D axisymmetric domain with finite element method, and discussed the effect to the welding quality. In this study, we considered HDPE pipes. In heat soak stage, curved phase interface between the melt and solid is shown along the shape of welding surface. In jointing stage, squeezing flow is generated between curved welding surface and phase interface. The low shear rate in fusion domain reduces the alignment of polymer to the perpendicular direction of pipes, and then this phenomenon is expected to help to enhance the welding quality.