• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.325-328
• /
• 2005

EEFLs are mostly driven by sinusoidal wave driving method although EEFLs (External Electrode Fluorescent Lamps) are driven by both sinusoidal wave and square wave. The sinusoidal driving method reduces the cost and allows more power efficiency since this driving method can reduce the voltage stress of EEFL inverter switches and achieve the soft switching of the switches. And a transformer should be used in the inverter since the high voltage should be applied to the both ends of EEFL to turn on the lamp. However, the power loss mainly occurs at the transformer in the sinusoidal wave driving method. In order to remove the transformer which makes the power loss, a new method is presented. In this paper, the square wave is applied directly to the both ends of EEFL by a proposed two-stage inverter. Moreover, the luminance and power efficiency will be compared between the common sinusoidal wave driving method and square wave driving method.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.386-392
• /
• 2020

In this study, the drift current characteristics of charged particles are analyzed for panels fabricated by varying the waveform biasing of the active particle loading method (APLM), which is a method driven by the electrophoretic principle of loading charged particles into a cell of a barrier rib-type electronic paper. We prepare 3 panels using APLM and 1 panel without APLM. The waveform of APLM uses square wave and ramp wave, and the step voltage wave is applied to the driving voltage. The drift currents measured from the square wave and ramp wave with the same period applied by APLM are 4.872 µC and 5.464 µC, respectively, and the ramp wave is shown to be relatively advantageous for loading charged particles that have a large q/m. The time-current curve results confirm that the abrupt movement of charged particles is occurring. When the step form wave signal with a short time of 1s is first applied, initial large movement of the charged particles is confirmed to occur in all samples, which is understood as the effect of applying the voltage necessary to remove the imaging force. The results of this study are expected to improve the loading of charged particles into the electronic paper cell, driven by the electrophoretic principle and optimization of the driving conditions.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.72-81
• /
• 2018

본 논문에서는 영구자석형 동기전동기를 구동하는 인버터에서 사용할 수 있는 정현파 전류 운전 방식과 120도 운전 방식 및 150도 운전 방식에 대하여 각각 시뮬레이션을 수행하고 이것들의 운전 특성을 비교 분석한다. 이 운전 방식들은 통전각과 전동기의 상전류에 형태로 구분이 된다. 종래에는 인버터의 효율 향상을 위하여 정현파 전류 운전 방식과 120도 운전 방식 간의 전환 방법에 중점을 둔 연구가 많았으나, 본 논문에서는 이들 각각의 운전 방식에 대한 운전 특성을 비교 분석하여 그것들의 장점을 다양한 전환 방법으로 응용할 수 있도록 하는데 중점을 둔다. 이를 위하여 각각의 운전 방식에 대하여 전동기의 발생 토크, 속도 응답 특성, 상전류 THD에 대하여 시뮬레이션을 수행하였다. 그 결과로 정현파 전류 운전 방식이 3가지 운전 방식들 중에서 전체적으로 가장 좋은 성능을 보였고, 120도 운전 방식은 150도 운전 방식에 비하여 속도 응답 특성이 다소 우수하였으며, 150도 운전 방식은 120도 운전 방식에 비하여 상전류 THD가 낮은 것을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.409-412
• /
• 2006

EEFL can be driven by square wave driving method. A square wave is applied directly to both ends of EEFL by cascaded multi-stage full-bridge inverter. The various current shapes of lamp are achieved by various inductors between lamp and inverter. In this paper, it is newly investigated that the area of current directly influences the luminance. Furthermore, the 3-level square wave is considered to drive EEFL with self-discharge characteristics. The highest luminance efficiency is achieved by properly controlling the rate of self-discharge usage.

• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.93-98
• /
• 2022

본 논문에서는 풀 브릿지 인버터의 비선형성을 고려한 단상 영구자석 동기 전동기의 오픈 루프 기동성을 개선하기 위한 구형파 전압 주입 기법을 제안한다. 일반적으로 단상 영구자석 동기 전동기는 3상 교류기와 달리 풀 브릿지 인버터를 채택하고 있으며 대칭 공극으로 자기 회로를 설계할 경우, 영토크 지점의 특정 위치에서 기동이 불가능할 수 있기에 비대칭 공극 설계가 요구된다. 이러한 단상 영구자석 동기 전동기의 구동 특성상 센서리스 운전 모드의 오픈 루프 제어시 기동 실패의 가능성이 상당히 높다. 본 논문에서는 이러한 문제를 해결하기 위해 인버터의 비선형성을 고려한 구형파 전압을 인가하여 기동 성능을 개선하는 기법을 제안하고자 한다. 제안한 알고리즘은 다수의 실험을 통해 타당성을 검증하였다.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.155-161
• /
• 2016

Injected fuel pressure waves of a common rail injector with various current profiles supplied to the injecor were measured using Bosch method. In order to drive the common rail injector, the current in the solenoid should be controlled using what is known as a peak and hold pattern, which consists of a high current level with a short time duration (peak) in the first step and a low current level with a long time duration (hold) in the subsequent step. The current profile can be shaped by swithcing an injector driving power source with the peak and hold waves. The capture, compare and PWM (CCP) pin in the microprocessor was used to generate the combined peak and hold waves. The PWM square wave generated from the CCP pin has a duty ratio of 100% for the peak current and 10% or 30% for the hold pattern. Five patterns of the current profile were generated by combining the peak and hold wave. The common rail pressure is controlled at 75, 100, and 130 MPa. As the fuel rail pressure increases, the variations of the measured fuel injection pressure wave according to the current profiles decrease.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.763-773
• /
• 2004

This paper suggests the 2 D.O.F mathematical model of the High Frequency Vibro-Hammer (HFVH), introduces an experimental method for measuring of the attenuation of piling vibration and proves what experiments are coincident with the equation of wave propagation. As vibratory installation of piles and casings has many economic merits in the construction field, most of all contractors prefer to vibratory pile driving method than the other. Compared to impact pile driving, vibratory installation has the advantage of reducing vibration or noise pollution and can drive piles under high frequency. Experiments serve estimations of capabilities and limitations of the HFVH's excitation force and finding of sensitivity for important soil resistance parameters. Also, we discuss the HFVH that can drive with three kinds of input waves (triangular, sine and square wave) and propose the design of parameters to improve actuating performance in it.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1992년도 추계학술발표회논문집
• /
• pp.11-15
• /
• 1992

Currently-using low-pressure lamps are usually drivel by the AC power supply. There are good and bad points according to high or low frequency in AC power driving type. For the low-pressure lamps, its efficiency increases and flicker decreases when it ignites at high frequency. So we already use the high-frequency electronic ballast of the low-pressure discharge lamps broadly. But there are EMI interference in high-frequency driving type because of giving the fluorescent lamp the high- frequency current. So recently, we have a tendency to compensate for that defects by DC driving method. As follows, we suggest pseudo DC discharging electronic bar lasts for fluorescent lamps which have the characteristics of high efficiency and no flicker by driving constant current boosted square wave.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.354-355
• /
• 2019

본 논문은 Polymer Dispersed Liquid Crystal(PDLC)의 구형파 구동방식에 따른 전기광학적 특성을 비교한다. 현재 PDLC는 변압기를 사용하여 전압가변이 힘들어 ON/OFF 기능으로만 사용한다. PDLC 구동시스템에 전력변환장치를 적용하면 전압가변이 용이하여 PDLC의 투과도 조절이 가능하다. 구형파 구동방식 중 인버터의 DC Link Voltage를 가변하는 방식과 Duty ratio를 가변하는 두 방식의 전기광학적 특성을 비교하였다. 이를 실험을 통하여 전기광학적 특성을 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.475-482
• /
• 2020

For electronic paper displays using electrophoresis, the response time and reflectivity of the image panel fabricated by filtering are analyzed. For the filtering process, a square wave and ramp wave are applied to white charged particles with a unique q/m value. We divide the sample panels into #1 to #4 according to the applied waveform in the filtering process. Step waves comprising two steps are used to drive the panel; therefore, we divide the driving conditions into D1~D4. The applied voltage at the first stage of the half cycle of the driving waveform moves the charged particles attached via the image force from the electrode, and the applied voltage at the second stage moves the floating charged particles by detaching. As mentioned, four types of driving conditions (D1 to D4) classified according to the half cycle of the driving waveform are applied to the samples #1 to #4), which are classified according to four types of filtering process. When driving condition D1 is applied to the four types of sample panels, the rise time of #1 is 1.59s, #2 is 1.706s, #3 is 1.853s, and #4 is 1.235s, resulting in #4 being relatively faster compared with other sample panels, and showing the same trend in other driving conditions. As a result, we confirm that applying the driving condition D1 causes abrupt movement of the white charged particles injected into the cell. When the same driving waveform (D1) is applied to each sample, reflectivities of 32.1% for #1, 31.4% for #2, 27.9% for #3, and 63.4% for #4 are measured. From the experiment, we confirm that the driving condition D1 (1s of 3.5 V, 9s of 3.0 V) and ramp wave #4 in filtering are desirable for good reflectivity and response time. Our research is expected to contribute to the improvement of the filtering process and optimization of the driving waveform.