• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1493-1496
• /
• 2005

In this paper, we describe a simple, precise and low cost method of fabricating PDMS stamp for UV embossing. It is important to improve the replication quality of stamp because the accuracy of fabricated structure is related to that of the stamp in UV embossing. The PDMS stamp has been fabricated by the replica molding technology with ultrasonic vibration to eliminate micro-air bubbles during the fabrication process of PDMS stamp. Also, this fabrication to use ultrasonic vibration promotes PDMS solution to fill into micro channel and edge parts. We report the fabrication of an optical core using UV embossing with fabricated PDMS stamp. This fabricated core is $7\;\mu{m}\;at\;depth,\;6\;\mu{m}\;at\;width.\;This\;measured\;value\;has\;the\;difference\;below\;1\;\mu{m}$compared to the original stamp. The surface roughness of core is about 14 nm root mean square. This is satisfactory value to use low-loss optical waveguide. Our successful demonstration of precise replica technology presents an alternative approach for the stamp of UV embossing.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.543-547
• /
• 2002

In this paper, we introduce a more improved camera modeling method for linear pushbroom images than the method proposed by Orun and Natarajan(ON). ON model shows an accuracy of within 1 pixel if more than 10 ground control points(GCPs) are provided. In general, there is high correlation between platform position and attitude parameters but ON model ignores attitude variation in order to overcome such correlation. We propose a new method that obtains an optimal solution set of parameters without ignoring the attitude variation. We first assume that attitude parameters are constant and estimate platform position's. Then we estimate platform attitude parameters using the values of estimated position parameters. As a result, we can set up an accurate camera model for a linear pushbroom satellite scene. In particular, we can apply the camera model to its surrounding scenes because our model provide sufficient information on satellite's position and attitude not only for a single scene but also for a whole imaging segment. We tested on two images: one with a pixel size 6.6m$\times$6.6m acquired from EOC(Electro Optical Camera), and the other with a pixel size 10m$\times$l0m acquired from SPOT. Our camera model procedures were applied to the images and gave satisfying results. We had obtained the root mean square errors of 0.5 pixel and 0.3 pixel with 25 GCPs and 23 GCPs, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.134-144
• /
• 2003

Reactive diffusion couples between Fe-5.8at.%Si and (Si wafer, $FeSi_2$, or FeSi alloy) were heat-treated at 1423k. The only layer of $Fe_3Si$ phase was formed in each diffusion couple. The width of $Fe_3Si$ layer was proportional to square root of diffusion time in each kind of diffusion couple. Growth rate of $Fe_3Si$ layer was relied on the concentration of Si in the supplied source of Si atoms. Interdiffusion coefficient of $Fe_3Si$ has been determined from the derived relation between growth rate constant and interdiffusion coefficient in this work. It was shown that the behavior of Kirkendall's void in $Fe_3Si$ layer was not affected by the kind of Si source. But solid solution $\alpha$ was formed in the diffusion couple between Fe-5.8 at.%Si and $Fe_3Si$ alloy. Kirkendall's voids in diffusional $\alpha$ were neglectively smaller than the case of $Fe_3Si$ phase growth.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.107-114
• /
• 2020

In this study, a two dimensional model of receding contact problem has been analyzed using finite element method (FEM) based software ANSYS and ABAQUS. For this aim finite element modeling of elastic layer and two homogeneous, isotropic and symmetrical elastic quarter planes pressed by means of a rigid circular punch has been presented. Mass forces and friction are neglected in the solution. Since the problem is examined for the plane state, the thickness along the z-axis direction is taken as a unit. In order to check the accuracy of the present models, the obtained results are compared with the available results of the open literature as well as the results of two software are compared using Root Mean Square Error (RMSE) and good agreements are found. Numerical analyses are performed considering different values of the external load, rigid circular radius, quarter planes span length and material properties. The contact lengths and contact stresses of these values are examined, and their results are presented. Consequently, it is concluded that the considered non-dimensional quantities have noteworthy influence on the contact lengths and contact stress distributions, additionally if FEM analysis is used correctly, it can be an efficient alternative method to the analytical solutions that need time.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.49-55
• /
• 2015

This paper reports solution-processed, high-efficiency organic light-emitting diodes (OLEDs) fabricated by a knife coating method under ambient air conditions. In addition, indium tin oxide (ITO), traditionally used as the anode, was substituted by optimizing the conductivity enhancement treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films on a polyethylene terephthalate (PET) substrate. The transmittance and sheet resistance of the optimized PEDOT:PSS anode were 83.4% and $27.8{\Omega}/sq$., respectively. The root mean square surface roughness of the PEDOT:PSS anode, measured by atomic force microscopy, was only 2.95 nm. The optimized OLED device showed a maximum current efficiency and maximum luminous density of 5.44 cd/A and $8,356cd/m^2$, respectively. As a result, the OLEDs created using the PEDOT:PSS anode possessed highly comparable characteristics to those created using ITO anodes.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.289-292
• /
• 2015

The etching processes of glass in aqueous hydrofluoric acid (HF) solutions were used to improve the current density of solar cell. In this study, the textured glass substrate has been etched by solution and the $TiO_2$ thin films have been prepared on this textured glass. After the $TiO_2$ film deposition the surface has been etched by HF under different concentration and the etched $TiO_2$ thin films had a longer electron lifetime and higher haze ratio as well as light scattering, resulting in 1.7 times increment of dye-sensitized solar-cell(DSSC) efficiency. Increases in the surface root-mean-square roughness of glass substrates from 80 nm to 1774 nm enhanced haze ratio in above 300 nm wavelength. In particular, haze ratio of etched $TiO_2$ films on textured glass showed gradually increasing tendency at 550 nm wavelength by increasing of HF concentration up to 10M, suggesting a formation of crater with various sizes on its surface.

• 공업화학
• /
• 제4권2호
• /
• pp.300-307
• /
• 1993

$Na_2S_2O_4$ 수용액과 $CCl_4$-toluene 용액의 2상에서 유기상에 용해하는 tricaprylmethylammonium chloride 상이동 촉매를 사용하여 methyl methacrylate의 라디칼 중합속도를 측정하여, 액-액 불균일계 접촉계면을 통한 라디칼 중합반응기구를 해석하였다. MMA의 중합속도는 수용액상에 존재하는 $Q^+$ 이온의 농도와 ${S_2O_4}^{-2}$ 이온의 농도의 제곱근에 정비례하고 $CCl_4$와 MMA의 농도에 각각 정비례하였다.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.71-78
• /
• 2006

본 논문에서는 직교 좌표계에서 추적필터가 설계될 때, 표적의 거리와 방위에 대한 관측오차 공분산의 변화를 고려하기 위하여 정상상태 칼만필터의 해석적 해를 이용하는 IMM 추적기를 설계하였다. 제안된 정상상태 칼만필터 기반 IMM 추적기의 성능분석 및 검증을 위하여 거리의 변화가 작은 표적과 거리의 변화가 큰 표적에 대하여 각각 100회의 Monte Carlo 시뮬레이션을 수행하고, 고정이득 및 칼만필터 기반의 IMM 추적기와 RMS 오차분석을 통하여 비교하였다. 모의실험 결과로부터 제안된 방법이 칼만필터 기반 IMM 추적필터에 비하여 연산량을 크게 감소시킬 수 있으며, 유사한 추적성능을 제공할 수 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.813-820
• /
• 2010

The spread mooring system for FPSO is developed to explore deep sea area, in which swell is dominant. It is known that the tension response of mooring lines in this sea area shows bimodal spectrum. Assuming normal distribution of tension profile and Rayleigh distribution of tension amplitude, the power spectral density function (PSD) of the mooring tension under the bimodal stationary random process is applied for the calculation of spectrum fatigue. Three popular methods, which are simple summation method, combined spectrum method and Jioa-Moan method, are used to combine fatigue damages from bimodal spectrum characteristics. Each damage value is compared with damage using Rainflow Cycle Counting (RCC) method which is believed to be close to exact solution. Vanmarcke' parameter and RMS(Root Mean Square) ratio are employed to assess relative damage variations between from RCC method and from three combination methods. Finally the most reliable fatigue damage combining method for spread mooring system is suggested.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1139-1147
• /
• 2015

In this paper, an algorithm based on a model analysis of the online calculation of the root-mean-square (RMS) value of welding current for single-phase AC resistance spot welding (RSW) was developed. The current is highly nonlinear and typically non-sinusoidal, which makes the measuring and controlling actions difficult. Though some previous methods focused on this issue, they were so complex that they could not be effectively used in general cases. The electrical model of a single-phase AC RSW was analyzed, and then an algorithm for online calculation of the RMS value of the welding current was presented. The description includes two parts, a model-dependent part and a model-independent part. Using a previous work about online measurement of the power factor angle, the first part can be solved. For the second part, although the solution of the governing equation can be directly obtained, a lot of CPU time must be consumed due to the fact that it involves a lot of complex calculations. Therefore, a neural network was employed to simplify the calculations. Finally, experimental results and a corresponding analysis showed that the proposed algorithm can obtain the RMS values with a high precision while consuming less time when compared to directly solving the equations.