• 비파괴검사학회지
• /
• 제14권3호
• /
• pp.185-193
• /
• 1994

범용의 초음파탐상장치에서는 탐촉자를 구동하기 위하여 높은 전압의 좁은 펄스를 사용하는데, 이 펄스의 평균 출력에는 제한이 따른다. 과도하게 높은 전압은 탐촉자를 파괴시키고, 지나치게 긴 펄스는 분해능을 감소시킨다. 긴 폭의 의사렌덤신호를 사용한 펄스압축은 상호관계를 이용하여 분해능을 감소시키지 않고 신호대 잡음비를 개선할 수 있다. 본 연구에서는 Golay 코드를 사용한 초음파펄스압축법을 개발하였다. 이론적으로 펄스압축에서의 신호 특성 및 신호대 잡음비를 계산하기 위하여 Golay 코드의 등 가임펄스를 제안하였고, 이를 실험적으로 증명해 보였다. 렌덤한 잡음신호에 대하여 S/N 비가 Golay 코드의 제곱근에 비례하였고, 이 방법은 고분자, 플래스틱, 고무와 같은 흡수가 큰 재료에서 유용함을 알 수 있었다.

• 동의생리병리학회지
• /
• 제24권6호
• /
• pp.1077-1081
• /
• 2010

In this work, we report the diagnostic relations among some primary pulse conditions such as the floating/sunken, deficient/forceful, large/fine, and the long/short pulses. For this purpose, we carried out a clinical test, in which 11 Oriental medical doctors had participated to diagnose the pulses for 1566 healthy subjects. The subjects were divided into 11 subgroups and each subgroup was allocated to an individual doctor. It resulted in that, for 847 subjects (54%), two or more than two pulse conditions were felt simultaneously, for which we counted the frequency of the pairs of the pulse conditions. For the statistical analysis, we used a Chi-square test. As a result, at high frequency, the forceful, large, and the long pulses were diagnosed in pairs or in their triplet, and a similar close relation was found between the deficient, fine, and the short pulses. The pairwise diagnoses of the pulse conditions between the forceful, large, and the long pulses, and between the deficient, fine, and the short pulses imply their close relatedness in clinics. This result is supported by the theory of deficiency/excess syndromes. Moreover, we show that the close relatedness among the pulse conditions can be understood in terms of the geometric features of the radial artery near the prominent bone. This is the first work which reports the relatedness between the primary pulses by an objective clinical test.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.79-85
• /
• 1999

마이크로 스트립 다중 선로의 고속 디지털 펄스 신호에 대한 상호 결합 특성을 신간영역에서 등가 회로 모델을 사용하여 나타내었다. MMIC 설계시 펄스의 상승시간과 주파수 및 듀티 사이클에 따른 간섭과 누화 특성을 분석하기 위해 SPICE용 알고리즘을 개발하였고, 이 알고리즘에 희한 해석 결과를 Branin 법과 FDTD법에 의한 결과와 비교하여 일치함을 보였다. 해석은 결합 마이크로 스트립 선로의 기하학적 구조에서 펄스의 특성에 따른 전송 특성을 중심으로 나타내었다. 본 논문의 결과는 MIC 나 MMIC 회로 설계시 신호의 주파수와 결합선로의 구조적 문제를 CAD 프로그램에서 직접 해석하여 간섭 효과를 줄이는데 적용할 수 있다.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.82-88
• /
• 2011

With a tendency for the application of thin magnesium alloy plates in portable electronic equipment such as cell phone and notebook PC, there is a requirement to develop a welding technology for the lap welding of these thin magnesium alloy. This paper presents the single pulsed laser welding of AZ31B magnesium alloy. The effects of fiber types and parameters such as peak power and pulse width on laser weldability were investigated. The results show that weld defects, especially solidification crack, were always generated in the weld. These defects couldn't be controlled by the simple square pulse, but could be improved through the application of variable pulse. It is because that variable pulse has effect of solidification delay by dropping peak power gradually.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.902-907
• /
• 2008

Shape of the pulse waveform is affected by the visco-elasticity characteristics of the arterial wall and the reflection waves generated at the bifurcations of arterial branches. This study was designed to improve the accuracy for the extraction of pulse wave features, then proved the superiority of the developed algorithm by clinical evaluation. Upstroke point of the pulse wave was used as an extraction feature since it is minimally affected by the waveform variation. R-peak of the ECG was used as a reference to decide the minimum level, then intersection of the least squares of regression line was used as an upstroke point. Developed algorithm was compared with the existing minimum value detection algorithm and tangent-intersection algorithm using data obtained from 102 subjects. Developed algorithm showed the least standard deviation of $0.29{\sim}0.44\;m/s$ compared with that of the existing algorithms, $0.91{\sim}3.66\;m/s$. Moreover, the rate of standard deviation of more than 1.00m/s for the PWV values reduced with the range of $29.0{\sim}42.4%$, which proved the superiority of the newly developed algorithm.

• 여성건강간호학회지
• /
• 제14권1호
• /
• pp.28-35
• /
• 2008

Purpose: The study was performed to evaluate effects of aroma therapy on the anxiety, blood pressure and pulse of uterine leiomyoma patients before surgery and to apply it as the actual nursing intervention. Method: From Aug1st to Nov. 30th, 2007, the experimental group (n=30) and the control group (n=30) were selected in 1 hospital, Busan. Lavender and Bergamot oil mixed together at a 3:2 ratio was applied to the experimental group two times at 8-9 pm the day before surgery and twice 30 minutes before the surgery. Anxiety, VAS, blood pressure, and pulse were measured to evaluate the effects of aroma therapy. The data analysis was done using the SPSS/PC 12.0 program using chi-square test and t-test. Results: Hypothesis 1 was supported. The VAS of the experimental group was lower than control group after aroma therapy. Hypothesis 2 was partly supported. The systolic blood pressure and pulse of experimental group was significantly decreased, but diastolic blood pressure wasn't difference. The VAS, systolic blood pressure and pulse of control group were increased. Conclusion: The study verified that the aroma therapy is a very effective nursing intervention that can reduce anxiety before surgery. It is recommended to apply aroma therapy actively to patients experiencing anxiety before surgery procedure.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 1994

Electrofusion of cabbage protoplasts was performed with a developed equipment which consists of a parallel wire electrode, a AC field generator, and a pulse generator. Exposure of protoplasts to an alternating current field of 450 KHz causes attraction to each other which leads to chains of protoplasts extending from the electrode. Intra-specific protoplast fusion was effectively induced within the pearl chains by the additional application of a single high-intensity DC square wave pulse of 1 KV/cm for 1-3 msec. To improve the performance, micro fusion electrode fabricated from the semiconductor technology and microcontroller based field an, d pulse generator was proposed. The viability of protoplasts after an application of electric field at optimum condition was reduced by only 5 % compared with that of pre-application. A prototype of fusion electrode, which consists of insulator-structure, was successfully fabricated by using photosensitive polyimide.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.95-100
• /
• 2006

The pulse compression technique using Linear FM signal is commonly used for improving the performance of both the detection range and range resolution in radar system. In general, the compressed LFM waveform has relatively large sidelobe level which may prevent a target from being detected when strong jammer or clutter signal is near the target signal. In this paper, we propose a new weighting method which uses the square-root weight to suppress the sidelobe level. Typical applications are missile seekers and tracking radar systems where target tracking range is available prior to the signal processing. By computer simulation, we show that the performance of the proposed method is better than that of the conventional weighting methods in terms of sidelobe suppression.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.42-48
• /
• 1988

MM(multimode) PWM(pulse width modulation) Suitable for high performance and harmonic effects minimization of VSI (voltabge source invertetr)-IM (induction motor)drive system is proposed. The approximated optimal, suboptimal and optimal PWM are implemented in the low frequency range, while square wave operation is realized in the hibh frequency range. The pulse width Modulator is capable of generating control signals to a transistorized inverter operating at about 1KHz. All functions except digital comparison have been implemented in softyware making the scheme economical, flexible and reliable. Pulse width modulator is built and tested experimentally. In order to confirm the effectiveness and the reliability of the theoretical proposition, this scheme is applied to 1Hp, Three phase IM. As results, it is concluded that the scheme of MM PWM is superior to other conventional switching scheme through the discussions or analysis carried out on the items such as line-to-line voltage, current and spectrum of current harmonic components observed at the output terminal of inverter, noise level of motor.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.134-140
• /
• 2008

Micro electrochemical machining (ECM) is conducted on stainless steel 304 using non-toxic electrolyte of citric acid. Electrochemical dissolution region is minimized by applying a few hundred second duration pulses between the tungsten SPM tip and the work material. ECM characteristics according to citric acid concentration, feeding velocity and electric conditions such as pulse amplitude, pulse frequency, and offset voltage are investigated through a series of experiments. Micro holes of $60{\mu}m$ in diameter with the depth of $50{\mu}m$ and $90{\mu}m$ in diameter with the depth of $100{\mu}m$ are perforated. Square and circular micro cavities are also manufactured by electrochemical milling. This research can contribute to the development of safe and environmentally friendly micro ECM process.