• International Journal of Aerospace System Engineering
• /
• v.7 no.1
• /
• pp.21-27
• /
• 2020

Quasi steady stall is a phenomenon to characterize the aerodynamic behavior of aircraft at high angle of attack region. Generally, it is exercised from a steady state level flight to stall and its recovery to the initial flight in a calm weather. For a theoretical study, such maneuver is demonstrated in the form of aerodynamic model which consists of aircraft's stability and control derivatives. The current research paper is focused on the appropriate selection of aerodynamic model for the maneuver and estimation of the unknown model coefficients using least-square method. The statistical accuracy of the estimated parameters is presented in terms of standard deviations. Finally, the validation has been presented by comparing the measured data to the simulated data from different models.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.433-438
• /
• 2004

The rapid machining of prototypes plays an important role in product process. Rapid Prototyping(RP) is the widespread technology to produce prototype. But, it have many problems such as shrinkage, deformation and formation occurred by hardening of resin and stair shaping, On the contrary, high speed machining(HSM) technology has many advantages such as good quality, low cost and rapid machining time. Moreover, it is possible to use the material of original product. This paper presents manufacture of trial product by HSM and optimization of machining condition for high productivity in the view of manufacturing time and average error. For example, propeller is machined by the surface machining of thin surface parts. Experiments are designed of machining conditions by Latin Square method and machining condition is optimized and selected by ANOVA

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.99-106
• /
• 2005

This paper presents manufacture of mock-up by HSM and optimization of machining condition for high productivity in the view of manufacturing time and accuracy. The rapid machining of prototypes plays an important role in building mock-up. Rapid Prototyping(RP) is a technology to make prototype. But, it have many problems such as shrinkage. deformation and formation occurred by hardening of resin and stair shaping. On the contrary, high speed machining(HSM) technology has many advantages such as good quality, low cost and rapid machining time. HSM and RP is compared for machining efficiency. Experiments are designed by Latin Square Method and machining condition is optimized and selected by ANOVA. For example, propeller is machined by the surface machining of thin surface parts.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.2
• /
• pp.33-39
• /
• 2013

Multilateration(MLAT) may complement secondary surveillance radar and also act as a real-time backup for the ADS-B system. This System is using time difference of arrival (TDOA) and based on triangulation principle. Each TDOA measurement defines a hyperbola describing possible aircraft locations. The accuracy in MLAT system depends on the positional relationship of the receiver and aircraft. There are various algorithms to localize aircraft based on TOA estimation. In this paper, we use least square method and extended Kalman filter and compare their results. Study results show that the extend Kalman filter provides a better performance than the least square method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.318-326
• /
• 1991

A Quantizer reconstruction level control method for block artifact reduction in DCT image coding is described. In our scheme, quantizer reconstruction level control is obtained by adding quantization level step size to the optimum quantization level in the direction of reducing the block artifact by minimizing the mean square error(MSE) and error difference(EDF) distribution in boundary without the other additional bits. In simulation results, although the performance in terms of signal to noise ratio is degraded by a little amount, mean square of error difference at block boundary and mean square error having relation block artifact is greatly reduced. Subjective image qualities are improved compared with other block artifact reduction method such as postprocessing by filtering and trasform coding by block overlapping. But the addition calculations of 1-dimensional DCT become to be more necessary to coding process for determining the reconstruction level.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.332-336
• /
• 2009

Functional prediction of unannotated proteins is one of the most important tasks in yeast genomics. Analysis of a protein-protein interaction network leads to a better understanding of the functions of unannotated proteins. A number of researches have been performed for the functional prediction of unannotated proteins from a protein-protein interaction network. A chi-square method is one of the existing methods for the functional prediction of unannotated proteins from a protein-protein interaction network. But, the method does not consider the topology of network. In this paper, we propose a novel method that is able to predict specific molecular functions for unannotated proteins from a protein-protein interaction network. To do this, we investigated all protein interaction DBs of yeast in the public sites such as MIPS, DIP, and SGD. For the prediction of unannotated proteins, we employed a modified chi-square measure based on neighborhood counting and we assess the prediction accuracy of protein function from a protein-protein interaction network.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2007

To establish the Fourier-transform infra-red spectrophotometry (FTIR) direct-on-filter(DOF) technique as a useful analytical method for quartz in respirable dust samples, influence of the interference should be corrected. This study was designed to compare three methods of correction for cristobalite when quantifying the content of quartz, including the least square, the optimum choice and the spectral subtraction methods. Respirable dust, created in a dust chamber containing the standard material of quartz, cristobalite was collected using a cyclone equipped with a 25 mm, $0.8{\mu}m$ pore size DM filter as a collection medium. The quartz weights overestimated about 100% when mixed of cristobalite by measure using 799 cm-1 absorption peak of quartz. The quartz weights appeared over estimated by optimum choice, spectral subtraction and least square method in mixtures of 33% cristobalite were 90.3%, 60.1% and about 4.3%, respectively. The least square method have been adopted to correction methods of cristobalite and satisfactory results have been obtained. The results of this study suggest that, when correcting for effect of cristobalite on quantitative analysis of quartz in respirable dust by FTIR direct-on-filter method, the least square method produce the most unbiased results compared with those of other correction methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1425-1432
• /
• 2004

Because of the high performance with the edge regions, the existing LSE(Least Square Estimation) method provides much better results than other methods. However, since it emphasizes not oがy edge components but also noise components, some part of interpolated images looks like unnatural. It also requires very high computational complexity and memory for implementation. We propose a new LSE interpolation method which requires much lower complexity and memory, but provides better performance than the existing method. To reduce the computational complexity, we propose and adopt a simple sample window and a direction detector to reduce the size of memory without blurring image. To prevent from emphasizing noise components, the hi-linear interpolation method is added in the LSE formula. The simulation results show that the proposed method provides better subjective and objective performance with love. complexity than the existing method.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.2
• /
• pp.86-95
• /
• 2018

The fluid flow over structures has been widely investigated by many researchers because its extensive application in offshore structures, skyscrapers, chimneys and cooling towers, brides. In the viewpoint of reducing the drag for offshore structure, it becomes challenging problem in the field of hydrodynamic of offshore structure. The purpose of this study is to investigate a flow over a square cylinder with an attached splitter plate using RANS method. First, RANS turbulent models such as a standard $k-{\omega}$ model, SST $k-{\omega}$ model, RNG $k-{\varepsilon}$ model, realizable $k-{\varepsilon}$ model, standard $k-{\varepsilon}$ model were used for choosing suitable turbulent model which has the best agreement with available experimental result. Drag of single cylinder estimated by using standard $k-{\omega}$ has a good agreement with published experimental result. Therefore, the stand $k-{\omega}$ was selected for simulation for flow over a square cylinder with an attached plate. Second, the numerical results of drag of square cylinder with an attached splitter plate in various length of an attached plate were performed using RANS method in ANSYS Fluent. In this paper, the numerical simulations were conducted at a Reynolds number of 485 and the thickness of the splitter plate is chosen as a constant value about 10% of cylinder width. The numerical results of drag coefficient of square cylinder are compared with experimental result published by other researchers. Finally, the effect of the splitter plate attached to the rear side of the square cylinder has been investigated numerically with a focus on the drag coefficient and flow characteristic. As a result, the drag coefficient decreases with an increase in splitter plate length.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.605-612
• /
• 1994

The methods to determine the hydrodynamic coefficients for the fixed type artificial reefs which were constructed to control ecological system in coastal waters are compared and discussed by model test results. To calculate the wave forces, least square method show good agreement with the experimental results and more stability than maximum force component method or Fourier decomposition method. This modified least square method of weighting the square of measured force turned out to be the most feasible method for maximum force. Using the feasible method, hydrodynamic characteristics for artificial reefs on uniform slopes offshore and breaking zone were studied. They were properly related to Keulegan-Carpenter's number and found larger than previous results. Wave force coefficients for artificial reefs around breaking zone were distributed from 1.5 to 2.5, and the mean value was 2.0. Drag force components were more in evidence than inertia force in maximum force which is important parameter to evaluate stability for high-permeability structures. A formula for the calculation of the maximum force for artificial reefs design is proposed, using structural dimension, water particle velocity and Keulegan-Carpenter's number.