• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.15-22
• /
• 1997

The alkali treated and black dyed PET fabrics were sputter etched under Ar gas atmosphere. The color depth of PET fabrics were increased with sputter etching time only under some limits of discharge power. And above that limits of discharge power the color depth of PET fabrics was decreased by increasing discharge power and treatment time. Minute cracks were made by sputter etching in the whole surface of fabrics to the direction of perpendicular to the longitudinal side of yarns. The fineness and density of minute crack were increased with lowering discharge power. And the size of crack was far smaller than that of microcrater which was obtained by alkali treatment. It is considered that the increase of color depth is related to the minute crack. The water permeation time of sputter etched fabrics was increased with increasing discharge power and treating time. The increase of color depth attained by sputter etching was fully kept through repeated laundering.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.344-350
• /
• 2001

Wool fabrics were treated with dichloro isocyanuric acid (DCCA) and dyed with acid dyes (C.I. Acid Red 18), and then, they were treated by sputter etching. Wool fabrics had been sputtered with aluminium under various conditions such as sputter etching time and discharge power in the presence of argon gas. We compared mechanical properties, colour difference and fastness properties of these samples one another: Mechanical properties and colour difference of sputtered wool fabrics changed by sputter etching time, discharge power and DCCA concentration. Light fastness showed a rising tendency but rubbing fastness showed a downward tendency when sputter etching time was 7 minutes.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.44-51
• /
• 1994

Wool and silk fabrics dyed with C.l. Acid Black 155 were subjected to sputter etching and exposed to a low temperature argon plasma. Color depth of shade of the fabrics increased considerably, but sputter etching was more effectively than argon low temperature plasma treatment. And measured for any significant chemical modification by ESCA (XPS). Sputter etching and argon low temperature plasma treatments incorporated oxygen atoms into the surface.

• 한국세라믹학회지
• /
• 제34권12호
• /
• pp.1227-1234
• /
• 1997

ZnO thin films were prepared by rf-magnetron sputter at various conditions. Crystallinity, microstructure, chemical composition, and optical composition, and optical properties of the films were investigated as functions of substrate temperature (R. T.-50$0^{\circ}C$) an sputter gas (O2/Ar=0-50%). ZnO thin films grown at 50$0^{\circ}C$ with sputter gas of pure argon as well as at R. T. with sputter gas of a mixture of argon & oxygen(O2/Ar=2%) exhibit a strong tendency of (002) preferred orientation, compared with a considerable random orientation at the other conditions. The thin films with (002) preferred orientation has a chemical stoichiometry of Zn/O-1.01, a band gap of 3.3eV, and a packing density of 98% respectively.

• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.56-63
• /
• 1996

Low-temperature plasma treatment or sputter etching is of interest as one of the techniques to modify polymer surface. In this study, poly(ethylene terephthalate)(PET), nylon 6 and cotton fabrics dyed three black dyes were subjected to low-temperature argon plasma and also sputter etching. In relation to bathochromic effect, the surface characteristics of the treated fabrics and films were investigated by means of critical surface tension, SEM and ESCA measurement. The depth of shade of fabrics more increased by the sputter etching technique than argon plasma treatment. Many microcraters on the fiber surface formed by the sputter etching resulted in increase of surface area of the fiber and wettability, but the hydrophobic group was increased by the results of ESCA analysis. In particular the change in reflective index of the fibers was much more effective than the chemical composition of the fiber surface on increasing of the depth of shade.

• 한국염색가공학회지
• /
• 제9권2호
• /
• pp.50-56
• /
• 1997

Poly(ethylene terephthalate) (PET) has been etched by sputtering in the presence of argon gas and the resulting surface modifications investigated via weight loss, time of water permeation, half value period, scanning electron microscope(SEM) and color difference measurements. According to increasing sputter etching time, weight loss increased, the time of water permeation and half value period of the sputter etched PET fabrics decreased. Color depth of fabrics increased by increasing sputter etching time. We investigated the fabric surface modification by SEM. Many microcraters on the fabric surface formed by the sputter etching resulted in increase of surface area of the fabric and wettability.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.59-67
• /
• 1998

본 논문에서는 몬테카를로 방식을 사용하여 이온의 에너지에 대한 타겟 원자의 스퍼터율(Sputter Yield), 이온의 주입 각도에 대한 스퍼터율, 이온의 주입에 따른 타겟 원자의 발산 분포를 3차원으로 시뮬레이션 하였다. 중(중)이온으로 (Ar/sup +/)을 사용하였고, 경(輕)이온으로 (H/sup +/)을 사용하여 10 eV에서 100 KeV 영역의 에너지에 따른 스퍼터율을 계산하였다. 또한, 스퍼터 타겟 물질로서 Cu, Al을 사용하여 계산하였고, 실험치와 일치함을 확인하였다. 스퍼터율은 입사 이온의 에너지가 증가함에 따라 증가하는 경향을 보이지만, 임계점 이후에는 점차적으로 감소하는 경향을 보였다. 중이온에 의한 스퍼터에서는 임계점이 10 KeV 영역이었고, 경이온에 의한 스퍼터에서는 1 KeV 이하 영역이었다. 또한, 이온의 주입 각도에 따라서 타겟의 스퍼터율은 점차적으로 증가하였고, 68° 부근에서 최대 스퍼터율을 기록하였다. 이온의 주입 각도에 따른 타겟 원자의 분포도에서는 각도가 커짐에 따라서 타겟 표면 법선 방향으로 방출되는 원자의 수가 많아짐을 확인하였다. 본 연구에서는, CRAY T3E 슈퍼컴퓨터에서 시뮬레이션을 수행하였으며, 구현된 몬테카를로 스퍼터 시뮬레이터의 GUI(Graphic User Interface) 환경을 구축하였다.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.10-17
• /
• 1997

In order to improve the anti-static property of several hydrophobic fibers by sputter etching, polyester, polypropylene and poly(p-phenylene sulfide) have been etched by sputtering in the presence of argon gas and the resulting anti-static property investigated by half time decay, the time of water permeation, weight loss rate and scanning electron microscope(SEM). The temporary change and durability of anti-static property of samples treated with sputter etching were evaluated. The results were as follows; 1) Half time decay of samples treated with sputter etching were decreased about 18~38%. According to increasing sputter etching time, half time decay is decreased. 2) The wettability and weight loss rate of treated samples were increased remarkably. According to the SEM photographs, many microcraters on the substrate surface by the sputter etching were observed. 3) Although the washing treatment and the time elapsed after treatment are allowed longer, the variation of half time decay hardly can find.

• The Korean Journal of Ceramics
• /
• 제7권2호
• /
• pp.85-92
• /
• 2001

Thin films of ZnO and Al doped ZnO were prepared by rf magnetron sputter techniques. When the oxygen fraction in Ar-O$_2$ sputter gas was about 2.0%, the films exhibited the composition of Zn:O=1.05:1. The films prepared at 250 W contain larger grains than the films grown at 100 W. However, high deposition rate seems to deteriorates the crystallinity as well as Al-substitution, resulting in lower concentration of mobile electrons. The Al-doped ZnO films which were deposited at $500^{\circ}C$ show resistance of 1$\times$10$^-2$ Wcm; optical band gap of the films ranges from 3.25 to 3.40 eV. These electrical and optical features are related with microstructural as well as crystalline characteristics of the films.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.277-283
• /
• 2009

In this paper, aluminum doped zinc oxide (ZnO:Al) thin films on plastic substrate such as poly carbonate (PC), polyethylene terephthalate (PET) were prepared by RF magnetron sputtering method for flexible solar cell applications. Effects of the sputter pressure on the structural, electrical and optical properties were investigated. The crystallinity and the degree of the (002) orientation were deteriorated with increasing the sputter pressure. When the sputter pressure was higher, the conductivity of ZnO:Al films was improved because of the high carrier concentration and the Hall mobility. High quality ZnO:Al films with resistivity as low as $1.9{\times}10^{-3}{\Omega}-cm$ and the optical transmittance over 80 % in the visible region have been obtained on PC substrate at 2 mTorr.