• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.1-5
• /
• 2017

In this paper, we propose a wideband band-stop filter (BSF) in order to extend the stopband of the band-stop filter using a symmetric dual spurline and the coupled open stub. First, we know that the symmetric dual spurline structure is advantageous in widening the stopband, as compared to the asymmetric dual spurline structure. So we designed a band-stop filter that combines the electrically coupled open stub (ECOS) band-stop filter with a symmetric dual spurline. We can greatly extend the stopband, when it is combined with the dual spurline and electrically coupled open stub on a microstrip transmission line, without any size increment. The stopband of the proposed band-stop filter is extended by approximately 244% (rejection depth: -20 dB) compared with a band-stop filter without a dual spurline.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.399-404
• /
• 1987

By using the principles of the three line coupled, the equivalent admittance parameters of the band-stop filter of the three line two port spurline for MIC are derived. The frequency and in/output impedance characteristics of the filter were studied. One-section spurline bandstop filter with their stopband cented near 4GHz have been fabricated and tested. The results show good agreement between the theoretical centre frequency and the experimental results.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.614-618
• /
• 2007

A miniaturized bandstop filter (BSF) is introduced in this paper. The filter consists of one meander spurline and a pair of capacitively loaded stubs. The meander spurline with low resonant frequency and improved slow-wave factor exhibits excellent resonant bandgap characteristics which can be modeled by a longitudinally coupled resonator. The design of the proposed microstrip BSF is presented, and its performance is measured. Measurements show that there is a stopband from 2.3 to 5.6 GHz with $S_{21}$ less than -20 dB. The total length of this BSF equals 23 mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.341-341
• /
• 2010

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.28-35
• /
• 2010

In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-dB fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 GHz), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 GHz and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 GHz.