• 제목/요약/키워드: Spring Road

검색결과 158건 처리시간 0.021초

산림치유 프로그램 개발을 위한 일반 성인의 숲과 숲길의 선호도 분석 (Preference Analysis of General Adult on the Forest and Forest Road for the Development of Forest Therapy Program)

  • 김윤희;김동준;연평식;최병진
    • 한국환경생태학회지
    • /
    • 제28권5호
    • /
    • pp.597-606
    • /
    • 2014
  • 본 연구는 산림치유 프로그램 개발을 위한 일반 성인의 숲과 숲길의 선호도에 관한 연구이다. 숲과 숲길의 선호도에 대한 수요자 선호를 파악하여 보다 표적화되고 차별화된 산림치유 프로그램의 개발을 위한 기초자료 제공을 목적으로 실시하였다. 이를 위해, 잠재 수요자인 일반 성인 남 여를 대상으로 2014년 4월 19일부터 6월 30일까지 온라인 설문으로 숲과 숲길의 선호에 관한 설문조사를 실시하였다. 본 연구에서는 총 613부의 유효표본이 실제 분석에 사용되었다. 자료분석은 SPSS 21.0 프로그램을 사용하여 기술통계분석, 빈도분석, 교차분석, 다중응답분석을 통해 인구통계학적 특성(성별, 연령, 교육수준, 직업, 월평균 가계 소득)에 따른 숲과 숲길의 선호도의 차이를 살펴보았다. 분석 결과, 선호하는 계절의 숲은 봄, 가을, 계절 상관없음, 여름, 겨울 순으로 나타났고, 성별, 연령, 월평균 가계 소득에 따라 선호도에 유의한 차이가 있는 것으로 조사되었다. 선호하는 상태의 숲은 월평균 가계 소득에 따라 선호도에 유의한 차이가 있는 것으로 조사되었다. 산림치유 프로그램 장소로서 선호하는 숲은 자연휴양림, 치유의 숲, 도시숲, 공원, 학교숲 순으로 응답하였다. 거주지로부터 프로그램 장소까지의 거리에 따른 선호하는 숲을 조사한 결과 모든 경우에 대해 통계적으로 유의한 차이가 없게 나타났다. 숲길의 형태에 관해서는 약간의 경사가 있는 길을 가장 선호하는 것으로 조사되었다. 산림치유 목적으로 1회 걸을 때 선호하는 숲길의 길이는 1.5~3km, 1.5km이하, 3km 이상 순으로 나타났고, 성별과 연령, 교육, 월평균 가계 소득, 교육에 따라 선호도에 유의한 차이가 있는 것으로 조사되었다. 이러한 산림치유 프로그램 개발을 위한 일반성인의 숲과 숲길조사를 통하여, 성별, 연령, 교육수준, 직업, 월평균 가계 소득에 따라 숲과 숲길에서의 프로그램에 차별성을 두어야 할 것으로 판단된다. 특히, 연령에 따라 차별화된 프로그램이 제공되어야 할 것으로 판단된다. 본 연구 분석 결과가 성인을 대상으로 하는 산림치유 프로그램 개발을 위한 기초자료로 활용되기를 기대한다.

콘크리트 궤도의 동결깊이 및 동상량 측정 연구 (A Study of Frost Penetration Depth and Frost Heaving in Railway Concrete Track)

  • 이대영;김영진
    • 한국지반환경공학회 논문집
    • /
    • 제15권1호
    • /
    • pp.35-41
    • /
    • 2014
  • 계절적 동토 지역에 건설되는 도로, 철도 등의 구조물은 동결 융해의 반복으로 인한 기후조건으로 인해 동상 피해가 발생한다. 구조물 건설 시 동결깊이는 계절적 동토 지역에 건설되는 도로, 철도의 구조물 설계에 매우 중요한 요소이다. 본 연구에서는 현장시험시공을 통한 고속철도 콘크리트 궤도의 동결깊이 및 동상량 계측을 수행하였다. 강원도, 경기도, 충청북도 철도노선 인근에 모형 콘크리트 궤도를 설치한 후 메틸렌블루를 이용한 동결깊이와 동상량을 측정하였다. 본 연구를 통해 계측된 최대 동결깊이 및 동상량은 국내 한랭지 철도노반설계를 위한 기초자료로 활용될 수 있을 것으로 판단된다.

자동차 타이어의 Air-Pumping소음 예측을 위한 수치적 기법 (Numerical Method for Prediction of Air-pumping Noise by Car Tyre)

  • 김성태;정원태;정철웅;이수갑
    • 한국소음진동공학회논문집
    • /
    • 제15권7호
    • /
    • pp.788-798
    • /
    • 2005
  • The monopole theory has long been used to model air-pumped effect from the elastic cavities in car tire. This approach models the change of an air as a Piston moving backward and forward on a spring and equates local air movements exactly with the volume changes of the system. Thus, the monopole theory has a restricted domain of applicability due to the usual assumption of a small amplitude acoustic wave equation and acoustic monopole theory This paper describes an approach to predict the air-pumping noise of a car tyre with CFD/Kirchhoff integral method. The tyre groove is simply modeled as piston-cavity-sliding door geometry and with the aid of CFD technique flow properties in the groove of rolling car tyre are acquired.'rhese unsteady flow data are used as a air-pumping source in the next CFD calculation of full tyre-road geometry. Acoustic far field is predicted from Kirchhoff integral method by using unsteady flow data in space and time which is provided by the CFD calculation of full tyre-road domain. This approach can cover the non-linearity of acoustic monopole theory with the aid of Non-linear governing equation in CFD calculation. The method proposed in this paper is applied to the prediction of air-pumping noise of simply modeled car tyre and through the predicted results, the influence of nonlinear effect on air-pumping noise propagation is investigated.

수송 트레일러의 충격흡수장치 개발(II) - 동력경운기 연결 히치 - (Development of Vibration Absorption Device for the Transportation-Trailer System(II) - Connecting Hitch for Power Tiller-Trailer -)

  • 홍종호;이홍주;이성범;박원엽;김성엽
    • Journal of Biosystems Engineering
    • /
    • 제30권3호
    • /
    • pp.147-154
    • /
    • 2005
  • The improved hitch device, which connecting the trailer to power tiller, was developed. This device, composed with spring and rubber, could reduce the vibration and shock levels during driven on off-road. The vertical vibration accelerations for the improved hitch device were measured at 6 positions, i.e. engine, hitch, seat, and three points in trailer (front, middle, and rear) for not driving but at low engine speed of 500 rpm, and compared with the existing hitch device. The results of this study could be summarized as follows; The average vibration acceleration up to 120 Hz was $0.4m/s^2$ at engine part, but it was 0.08 and $0.05m/s^2$ at trailer for existing and improved hitch device, respectively. About $38\%$ of average acceleration level could be absorbed for the improved hitch device compared with existing hitch device. The average vibration acceleration up to 40 Hz was reduced to 0.12 and $0.06m/s^2$ at trailer for existing and improved hitch device respectively, showing the reduction effect of $50\%$. The maximum acceleration occurred at up to 20 Hz of low frequency was much higher than total acceleration occurred at up to 120 Hz, which means that much loss or damage could be occurred during transporting of agricultural products on off-road. The portions of average acceleration occurred at up to 20 Hz of low frequency were $27\%\;and\;21\%$ for the existing and improved hitch device, respectively.

영구자석의 척력을 이용한 자전거 완충장치 해석 (Analysis of Bicycle Cushion System by using Repulsive Force of Magnetics)

  • 윤성호
    • 한국전산구조공학회논문집
    • /
    • 제29권1호
    • /
    • pp.45-52
    • /
    • 2016
  • 자전거의 안장 지주에 영구자석의 척력을 이용하여 완충장치를 설치하고자 자기 해석용 상용프로그램을 이용하였다. 유한요소법으로 구한 해석치를 실험치와 비교하여 유한요소 해석치의 신뢰성을 확보하였다. 그 후에 3 자유도계의 자전거 동역학 모델을 완성하고 자석의 크기에 상응하는 등가 스프링 강성값을 모델에 이식하였다. 자전거의 동역학 모델에서 전륜과 후륜은 주행면의 비평탄도에 의한 입력을 부담하도록 하였다. 전륜과 후륜이 독립적으로, 또는 동시에 반삼각 범프(half-triangular bump)와 정현파 굴곡로(sinusoidal road)를 통과할 때의 동적 거동을 살펴보았다. 운전자와 프레임의 수직거동, 주행방향의 피칭 거동을 관찰하였으며 자전거의 완충 시스템을 보다 구체화할 수 있는 기반을 마련하였다.

타이어 접지폭을 고려한 3차원 차량모델에 의한 도로교의 동적해석 (Dynamic Analysis of Highway Bridges by 3-D. Vehicle Model Considering Tire Enveloping)

  • 정태주
    • 대한토목학회논문집
    • /
    • 제26권6A호
    • /
    • pp.989-999
    • /
    • 2006
  • 본 연구에서는 차량과 교량을 3차원으로 모델링하고, 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려하여 이동 차량이 교량을 통과할 때 교량의 선형동적해석을 수행할 수 있는 수치해석방법을 제시하였다. 3차원 차량모델에는 타이어의 접지폭을 고려하여 탠덤 다판스피링 차륜축의 피칭을 고려하여 단일차량인 2축과 3축 차량 및 5축 트랙터-트레일러를 각각 7-자유도, 8-자유도 미 14-자유도로 모델링하였다. 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였고, 그 해는 Newmark-${\beta}$법을 사용하여 계산하였다. 교량의 노면조도는 평균값이 영인 정상확율분포롤 가정한 지수스팩트럴밀도를 사용하여 생성시켰다. 교량은 주형을 보요소로, 콘크리트 바닥판은 쉴요소를 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Ragid Link를 사용하여 3차원으로 모델링하였다. 교량의 운동방정시은 모우드 중첩법을 사용하여 풀었다. 본 연구에서 제시한 수치해석방법으로 구한 결과와 Whittemoare 등과 Fenves 등이 실시한 실험값과 비교 검토하여 본 연구의 타당성을 입증하였다.

농산물 수송 트레일러의 현가장치 진동 분석 (Analysis of Vibration Suspension Device for Trailer in Agricultural Products)

  • 홍종호;이성범;박원엽;김성엽;오영근
    • 생물환경조절학회지
    • /
    • 제21권4호
    • /
    • pp.437-444
    • /
    • 2012
  • 본 연구에서는 현제 농가에서 사용하고 있는 진동흡수장치가 전혀 없는 트레일러(E)와 트레일러의 적재규격에 적합하게 평판스프링과 쇽업쇼바를 동시에 설계 제작한 트레일러(I)를 사용하였다. 트레일러에 360kg의 배를 4층으로 적재한 상태로 아스팔트 도로 위를 2m/s로 정속 주행하면서 발생된 평균 진동 주파수의 크기를 상호 비교하여 개발된 트레일러의 진동흡수 효과를 비교 분석하였다. 개발한 현가장치를 장착한 개량된 트레일러는 60Hz 이하와 80Hz 이하의 주파수에서 기존 트레일러에 비해 진동 가속도의 감소 효과가 매우 크게 나타났다. 기존 트레일러에 비하여 개량된 트레일러에서 평균 진동가속도의 크기는 주파수 영역에 따라서 다르긴 하지만 3분의 1까지 대폭 감소시킬 수 있었다. 후방의 상층에 적재된 농산물일수록 진동가속도의 크기가 높아 부패가 빨리 진행 된다고 보고된 논문과 일치하지 않는 이유는 전 연구자는 적재함의 길이가 14,000mm이었고 본 시험에서 사용한 적재함은 1,820mm로 비교적 짧은 것에서 얻어진 결과로 일정한 경향을 찾기가 어려웠던 것으로 판단된다. 모든 주파수의 영역에서 개량된 트레일러가 기존의 트레일러에 비하여는 진동가속도의 크기가 현저히 낮게 나타났다. 특히 40Hz에서 80Hz까지의 주파수대에서 3분의 1로 진동가속도의 크기를 줄일 수 있어서 농산물의 수송 손실을 대폭 감소시킬 수 있을 것으로 판단된다.

전자제어 현가장치를 위한 전기유변유체 쇽 업소버의 설계 및 성능평가 (Design and Performance Evaluation of Electro-rheological Shock Absorber for Electronic Control Suspension)

  • 성금길;최승복;박민규
    • 한국소음진동공학회논문집
    • /
    • 제20권5호
    • /
    • pp.444-452
    • /
    • 2010
  • This paper presents design and performance evaluation of electro-rheological(ER) shock absorber for electronic control suspension(ECS). In order to achieve this goal, a cylindrical ER shock absorber that satisfies design specifications for a mid-sized commercial passenger vehicle is designed and manufactured to construct ER suspension system for ECS. After experimentally evaluating dynamic characteristics of the manufactured ER shock absorber, the quarter-vehicle ER suspension system consisting of sprung mass, spring, tire and the ER shock absorber is constructed in order to investigate the ride comfort and driving stability. After deriving the equations of the motion for the proposed quarter-vehicle ER suspension system, the skyhook controller is implemented for the realization of quarter-vehicle ER suspension system. In order to present control performance of ER shock absorber for ECS, ride comfort and driving stability characteristics such as vertical acceleration and tire deflection are experimentally evaluated under various road conditions and presented in both time and frequency domain.

타이어 공기압에 따른 ER 댐퍼 장착 승용차의 승차감분석 (Ride Comfort Analysis of Passenger Vehicle Featuring ER Damper with Different Tire Pressure)

  • 성금길;최승복
    • 한국소음진동공학회논문집
    • /
    • 제26권2호
    • /
    • pp.210-216
    • /
    • 2016
  • In this work, performance analysis to improve ride comfort of an ER (electrorheological) fluid damper for a mid-sized passenger vehicle in terms of tire pressure is presented. An ER damper by considering specification for a mid-sized commercial passenger vehicle is proposed and mechanically designed. After manufacturing and assembling the proposed ER damper with design parameters, their performance such as field-dependent damping forces are experimentally measured. A quarter-vehicle ER ECS (Electronic Control Suspension) system consisting of the ER damper, sprung mass, spring, sky-hook controller and tire is constructed to analysis the ride comfort performances. Vertical tire stiffness with different tire pressure is experimentally measured and investigated. In addition, ride comfort analysis such as vertical acceleration root mean square (RMS) of sprung mass is investigated under bump road using quarter-vehicle test equipment.

선형 부착성 점탄성 접촉모형의 DEM 적용 및 해석적 방법을 이용한 검증 (Implementation and Verification of Linear Cohesive Viscoelastic Contact Model for Discrete Element Method)

  • 윤태영;유평준
    • 한국도로학회논문집
    • /
    • 제17권4호
    • /
    • pp.25-31
    • /
    • 2015
  • PURPOSES: Implementation and verification of the simple linear cohesive viscoelastic contact model that can be used to simulate dynamic behavior of sticky aggregates. METHODS: The differential equations were derived and the initial conditions were determined to simulate a free falling ball with a sticky surface from a ground. To describe this behavior, a combination of linear contact model and a cohesive contact model was used. The general solution for the differential equation was used to verify the implemented linear cohesive viscoelastic API model in the DEM. Sensitivity analysis was also performed using the derived analytical solutions for several combinations of damping coefficients and cohesive coefficients. RESULTS : The numerical solution obtained using the DEM showed good agreement with the analytical solution for two extreme conditions. It was observed that the linear cohesive model can be successfully implemented with a linear spring in the DEM API for dynamic analysis of the aggregates. CONCLUSIONS: It can be concluded that the derived closed form solutions are applicable for the analysis of the rebounding behavior of sticky particles, and for verification of the implemented API model in the DEM. The assumption of underdamped condition for the viscous behavior of the particles seems to be reasonable. Several factors have to be additionally identified in order to develop an enhanced contact model for an asphalt mixture.