• 해양환경안전학회지
• /
• 제3권2호
• /
• pp.63-67
• /
• 1997

In this study, some approximate theoretical solutions about oil spreading under the influence of gravitational and viscous forces have been derived from the viewpoint of energy conservation. The theoretical model which derived newly is in agreement with Toi's one derived from a different hypothesis, and shown to predict well the spreading distance of oil front at an initial step of outflow, but further study is necessary to evaluate the spreading distance after longer time.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.104-109
• /
• 2011

The present study investigated experimentally the spreading characteristics of a single liquid impinging on the inclined micro-textured aluminum (Al 6061) surfaces manufactured by using a micro computerized numerical control (${\mu}$-CNC) milling machine. The textured surfaces were composed of patterned micro-holes (diameter of $125\;{\mu}m$ and depth of $125\;{\mu}m$). In our experiment, the de-ionized (DI) water droplet of $4.3\;{\mu}l$ was impinged normally on the non-textured and textured surfaces at two different Weber numbers, and the droplet impinged on the inclined surfaces with different angles. A high speed camera was used to capture sequential digital images for measurement of the maximum spreading distance. It was found that for the textured surface, the measured apparent equilibrium contact angle (ECA) increased up to $105.8^{\circ}$, higher than the measured ECA of $87.6^{\circ}$ for the non-textured (bare) surface. In addition, it is conjectured that the spreading distance decreased because of a liquid penetration during droplet spreading through the holes, the increase in hydrophobicity, and viscous dissipation during impact process.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.60-65
• /
• 2005

어저귀 한지의 발묵특성을 장 단섬유의 혼합비율에 따라 비교 검토하여 화선지로써의 적용 가능성을 검토하고자 하였다. 제조한 한지의 발묵특성을 검토한 결과, 인피펄프 단독으로 초지한 한지는 발묵상태가 매우 불량하여 화선지용으로는 적합하지 않은 것으로 나타났으며, 목질부 단독으로 초지한 한지의 발묵상태가 시판 화선지류보다도 훨씬 우수한 경향을 나타냈다. 강도적인 측면을 고려한다면 설포메틸 펄프화법으로 처리한 단섬유인 목질부 펄프를 60% 혼합한 어저귀 한지가 화선지용으로 적합하다고 사료된다. 펄프화 방법에 있어서도 설포메틸 펄프화법으로 초지한 한지의 발묵상태가 우수하였다. 이렇듯 한지의 발묵상태는 장섬유와 단섬유의 혼합량 및 지합과 밀접한 관련이 있다.

• 한국화재소방학회논문지
• /
• 제27권5호
• /
• pp.38-43
• /
• 2013

보일러실이나 세탁소, 또는 음식점과 다중이용업소의 주방에 주로 설치하는 자동확산소화장치는 화재발생 시 화염이나 열에 의해 자동으로 약제가 방출되어 화재를 진압하는 소화기구 중 하나이다. 이 소화장치는 공칭방호면적에 해당하는 소화능력을 가지고 있으므로 방호대상물이 이 범위를 벗어나 있으면 유효한 화재진압이 보장되지 않지만 현행 기준에는 바닥면적에 따른 설치갯수만 요구하고 있다. 따라서 방호대상물과의 이격거리에 따라 소화성능은 달라지게 되며 이에 대한 특성을 고찰하고자 천장높이가 2.5 m인 모형화재실에 본 소화장치를 설치하고 A급, B급 모형가연물과의 수평이격거리에 따른 소화실험을 실시하였다. 실험결과 일반가연물과 유류가연물을 모두 확실하게 소화할 수 있는 최대수평이격거리는 약 30 cm인 것으로 나타났다.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.189-196
• /
• 2002

A multichannel seismic survey was conducted in the southern Ayu Trough which is the only spreading boundary between the Philippine Sea and Caroline plates. The seismic system used in this study comprises of 2.46-l sleeve gun and a 12-channel streamer with a group interval of 6.25m. Migration technique was used to analyze seismic velocity, and poststack depth migration was applied to the stacked data. The sediment thickness obtained from the depth section tends to increase with distance from the spreading axis. Sedimentation rates are poorly constrainted in the study area. The apparent half-spreading rates estimated from the sediment thickness and sedimentation rate from DSDP hole on the caroline plate are 4.7mm/yr and 7.9mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively, which are fester than Previously suggested. On the basis of new oblique spreading geometry, the recalculated spreading rates are 5.4mm/yr and 9.1mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively. Seismic sections show that the topography is asymmetric across the Ayu Trough and the acoustic basement is rough. These features are consistent with the earlier suggestion that the Ayu Trough is a slow-spreading divergent boundary. A detailed examination of seismic profiles away from the axis shows that sediments can be divided into two layers which implies a possible change in the spreading rate anuor sedimentation condition during the formation of the trough.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.664-671
• /
• 2006

We propose the correlation to predict the spreading thermal resistance on a plate with symmetrical four heat sources. The correlation transforms four heat sources to a single equivalent heat source and then the spreading thermal resistance can be obtained with the existing equation for a single heat source. When the four heat sources are mounted on a square base plate, the correlation is expressed as a function of the heat source size, the length of base plate, the plate thermal conductivity and the distance between heat sources. Compared to the results of three-dimensional numerical analysis, the spreading thermal resistance by the proposed correlation is in good agreement within 10 percent accuracy.

• 한국분무공학회지
• /
• 제17권1호
• /
• pp.27-34
• /
• 2012

In this paper an experimental study is presented to investigate the effect of a step edge and a stationary droplet on the dynamic behavior of impacting droplet on a wall. The main parameters are the distance from the edge and the center-to-center distance between two droplets. Photographic images are presented to show coalescence dynamics, shape evolution and contact line movement. The emphasis is on presenting the spreading length of droplet for the step edge and two coalescing droplets along their original centers. It is clarified that the droplet exhibits much different dynamic behavior depending on the location of the step edge. The momentum of impacting droplet was better transferred to the stationary droplet as the center- to-center distance between two droplets was reduced, which results in more spreading of coalescing droplet.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.12-19
• /
• 2006

Landslide model experiments considering hourly rainfall were performed to investigate and predict the run out distance induced by landslides. The model flume and the rainfall simulator were designed and produced. The model flume was designed in consideration of the landslide characteristics of Korea. The landslides in Korea were mainly occurred in the interface between soil layer and rock layer. The rainfall simulator was produced for controlling hourly rainfall ranged from 100mm/hr to 1,000mm/hr. Jumnunjin standard sand as slope soils was placed on the model flume. The model experiments were performed with changing the hourly rainfall ranged from 150mm/hr to 250mm/hr. In this experiments, the inclination of slope was 25o and the relative density of slope soils was 35%. As a result of experiments, the pore water pressure is rapidly increased at landslide occurring time, and the scale of landslide is increased with increasing in hourly rainfall. The spreading range of run out distance is occurred with pan type, and the spreading width and length are rapidly increased in its early stage and slowly increased after early stage. Also, The increasing velocity of run out distance of debris is influenced by hourly rainfall.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.201-210
• /
• 2019

최근 국내외 도심지역의 교통정체 완화와 공간의 효율성 증대를 위해 대도시내 도로의 지하화 시행빈도가 증가하고 있다. 도시부 터널은 극심한 정체상황 중 화재가 발생할 경우 대형 참사를 유발할 가능성이 산악터널보다 높기 때문에 소단면으로된 소형차전용터널로 시공이 될 가능성이 높다. 소형차 전용의 터널로 시공이 될 경우, 소형차 전용터널은 차량에 의한 설계화재강도를 감소할 수 있는 반면, 터널 높이 감소 등에 따른 단면적 축소에 따라 유해가스농도가 증가하여 위험도는 증가하는 상반된 특징이 있다. 본 연구에서는 수치해석을 통해 대배기구의 설치간격과 형태에 따른 화재양상을 터널 내 온도 및 CO농도를 분석하여 비교 검토하였으며, 다음과 같은 결론을 얻었다. 설치간격에 따른 연기확산거리는 큰 차이가 없는 것으로 분석되었으나, 본 연구에서는 간격이 100 m인 경우가 가장 효과적으로 분석되었다. 대배기구 형상에 따른 연기확산거리는 $4m{\times}3m$, $6m{\times}2m$, $3m{\times}2m$ (2열) 순으로 배연성능이 우수한 것으로 분석되었으며, 대배기구 형상에 따른 연기확산거리는 플래시오버 이후에는 큰 차이가 없지만 화재 성장과정에서 $3m{\times}2m$인 경우 다른 경우보다 확산거리가 큰 것으로 분석되었고, 대배기구 종횡비에 따른 연기확산거리는 횡방향으로 긴 경우보다 종방향으로 긴 경우가 화재연기의 확산거리가 더 짧은 것으로 분석되었다.

• 한국수산과학회지
• /
• 제41권2호
• /
• pp.140-149
• /
• 2008

This study evaluated the efficiency of an oil fence and spreading devices for one vessel in a towing tank. A series of model experiments and numerical calculations were conducted using an existing oil fence for two vessels and a new method for one vessel. Models of the oil fence and spreading devices were constructed on $1/20^{th}$ scale from waterproofed nylon fabric and canvas. The tensions acting on the model of the oil fences and the horizontal distance between the spreading devices were calculated numerically while the oil fences were being towed. The results were extremely close to the results of the model experiments. The ratio of the opening width to the total length of the oil fence, which shows the efficiency of the oil fence for one vessel, was 49.7% in 0.4 m/sec. Therefore, the proposed oil fence system should be very useful for oil containment at sea. As the opening width of the oil fence is not proportional to the length of the towing rope, it may be reasonable to maintain the towing rope at approximately 100 m. Furthermore, a reasonable towing speed, when operating the oil fence for one vessel equipped with spreading devices, was within 0.4 m/sec.