• ETRI Journal
• /
• v.45 no.4
• /
• pp.570-580
• /
• 2023

Sensor nodes are the most significant part of a wireless sensor network that offers a powerful combination of sensing, processing, and communication. One major challenge while designing a sensor node is power consumption, as sensor nodes are generally battery-operated. In this study, we proposed the design of a low-power, long range-based wireless sensor node with flexibility, a compact size, and energy efficiency. Furthermore, we improved power performance by adopting an efficient hardware design and proper component selection. The Nano Power Timer Integrated Circuit is used for power management, as it consumes nanoamps of current, resulting in improved battery life. The proposed design achieves an off-time current of 38.17309 nA, which is tiny compared with the design discussed in the existing literature. Battery life is estimated for spreading factors (SFs), ranging from SF7 to SF12. The achieved battery life is 2.54 years for SF12 and 3.94 years for SF7. We present the analysis of current consumption and battery life. Sensor data, received signal strength indicator, and signal-to-noise ratio are visualized using the ThingSpeak network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.3-12
• /
• 2013

Wireless Sensor Network (WSN) is used in the railway field in terms of efficient management and maintenance. Sensor communication technology based on IEEE 802.15.4/ZigBee is used in low speed train. However, it is difficult to apply in the high speed train that exposed to severe wireless channel environments. In this paper, we propose the sensor communication algorithm for high speed train environment. we improve error rate and throughput using Equalizer, Multiple Input Multiple Output (MIMO), Flexible Spreading Factor (SF) and Modulation. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee based on the standard of physical layer of 2.4GHz band in each algorithms. Simulation results show that proposed algorithms can improve error rate and throughput of conventional system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.817-824
• /
• 2006

The crest factor properties of 16-QAM modulated one- and two-code assisted multi-carrier code-division multiple-access (MC-CDMA) signals employing complementary pair as spreading sequences are characterized. It is shown that a set of relationship between the two 16-QAM symbols entirely characterize the power envelope waveforms of the signals. There exists 60 different sets of relationship, which results in 16 different crest factors as a result of various equivalent transforms on the corresponding message symbols. It is also shown that the individual crest factor corresponding to each message combination is always bounded by 3dB.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.568-577
• /
• 2002

The spreading Cocuoainim polykikoides bloom in the southern coastal waters of Korea was simulated using numerical model including the physical processes of water flow and the chemical processes of increasing cell of C. polykikoides by uptake of dissolved nutrients. The circulation of sea water was simulated by two dimensional tide model reflecting the main four tidal components of $M_2,\;S_2,\;K_1,\;O_1$, and permanent current was driven by inflow/outflow across open boundaries. According to the result of model which tidal and permanent current were reflected simultaneously, eastward flows entering the southern waters from the western waters of Korea are dominant but westward flows are weak relatively. These result suggest that it is difficult for initial C. polykikoides bloom generated in the coastal waters of Goheung to move to the western coast of Korea through Jeju Strait. For spreading model of C. poiyhikoides, the range of generating distribution and the generating time of C. polykikoides bloom in coastal area are similar to those of observation data in the field. Wind is the most important factor in moving and distribution of red tide. Permanent current flowing eastward is also considered to be important factor and tidal current was a little influenced.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.123-131
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. Several cases of pile failures were reported despite the fact that a large margin of safety factor was employed in their design. In this study, 1-g shaking table tests were performed in order to analyze the failure behavior of piles embedded in liquefied soil deposits by buckling instability. As a result, it can be concluded that the pile subjected to excessive axial loads $(near\;P_{cr})$ can fail easily by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, it was found that lateral loading due to lateral spreading increased lateral deflection of pile and reduced the buckling load. In addition, from the buckling shape of pile, difference between Euler's buckling and pile buckling vat observed. In the case of pile buckling, hinge formed at the middle point of the pile, not at the bottom. And in sloping grounds, location of hinge formation got lower compared with level ground because of the soil movements.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.57-62
• /
• 2008

Most of all the Korean home use a wallpaper as a decoration and finishing of interior. One of the fire spread factor in a house is a combustion of wall paper. There were some research concerning oxygen index in a ambient temperature. The purpose of this study is to investigate the difference of oxygen index of a wallpaper between ambient and high temperature and a effect on the fire spreading. Based on the result, the difference of oxygen index between ambient temperature and high temperature showed $5{\sim}8%$. Difference of 0.1% of oxygen index show big differences in combustion length of sample. Therefore, it was found that the decrease of oxygen index at elevated temperature is a important factor in fire spread.

• Biomedical Science Letters
• /
• v.7 no.3
• /
• pp.139-143
• /
• 2001

The present study was conducted to determine whether skin spread of Myrrha has an effect on the cell regeneration as well as wound healing following dermal scald burn injury, keratinocyte growth factor (KGF) level was analyzed immunologically in conjunction with the histological changes occurred in skin tissue. The KGF contents in Myrrha skin spread group, which shows cell regeneration ability in skin tissue after burn, increased after 5 hours. After 24 hours, 'the content of Myrrha skin spread group is noticeably higher than at 5 hours postburn. After 72 hours, KGF was decreased compared to at 24 hours postburn. Acceleration effect of KGF production in Myrrha skin spread group was high. Together with the result of histological changes, skin spread of Myrrha reduced protein degeneration and edema in dermis, and induced proliferation of epithelial cells. The data suggest that Myrrha has accelerate cell regeneration and wound healing in case of scald burn skin by spreading of paste.

• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.237-249
• /
• 2016

There are constraints on truck weight, axle configurations and size imposed by departments of transportation around the globe due to structural capacity limitations of highway pavements and bridges. In spite of that, freight movers demand some vehicles that surpass the maximum size and legal weight limits to use the transportation network. Oversized trucks serve the purpose of spreading the load on the bridge; thus, reducing the load effect on the superstructure. For such vehicles, often a quick structural analysis of the existing bridges along the traveled route is needed to ensure that the structural capacity is not exceeded. For a wide vehicle having wheel gage larger than the standard 1830 mm, the girder distribution factors in the design specifications cannot be directly used to estimate the live load in the supporting girders. In this study, a simple approach that is based on finite element analysis is developed by modifying the AASHTO LRFD's girder distribution factors for slab-on-steel-girder bridges to overcome this problem. The proposed factors allow for determining the oversized vehicle bending moment and shear force effect in the individual girders as a function of the gage width characteristics. Findings of the study showed that the relationship between the girder distribution factor and gage width is more nonlinear in shear than in flexure. The proposed factors yield reasonable results compared with the finite element analysis with adequate level of conservatism.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.565-570
• /
• 2015

Spread spectrum communications have increased interest due to their immunity to channel fading and low probability of intercept. One of the limitations of the traditional digital spread spectrum systems is the need for spreading code synchronization. Chaotic communication is the analogue alternative of digital spread spectrum systems beside some extra features like simple transceiver structures. In this paper, This paper was used instead of the digital modulation and demodulation carriers for use in the chaotic signal in a digital communication system among the chaotic modulation schemes, the Differential Chaos Shift Keying(DCSK) is the most efficient one because its demodulator detects the data without the need to chaotic signal phase recovery. Also Implementation of Differential Chaos Shift Keying Communication System Using Matlab/Simulink and the receiver con decode the binary information sent by the transmitter, performance curves of DCSK are given in terms of bit-error probability versus signal to noise ratio with spreading factor as a parameter and we compare it to BPSK modulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1976-1981
• /
• 2013

In this paper, we propose a frequency-domain interference cancellation algorithm for direct-sequence spread spectrum systems. In the previously proposed frequency-domain interference cancellation algorithms that protocol defines the rules concerning the collection of means of Transmission Control Protocol (TCP: Transmission Control Protocol) is the most widely used in the transport layer. Two-way traffic through the network path to the same end-to-end transfer of data in the opposite direction between pairs of nodes are infused with two or more TCP connection using the network traffic patterns from the exchanger and routers share results of approval. Per-flow input/output structure of matter using the LTS online reaction when evaluated as this is the most important factor. TCP-MT when the connection duration is one of the largest performance gains.