• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.953-959
• /
• 2001

Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution of ammonium $metatungstate(NH_4)_6(H_2W_{12}O_{40}){\cdot}4H_2O,\; AMT)$ and cobalt nitrate $hexahydrate(Co(NO_3)_2{\cdot}6H_2O)$. The thermal decomposition process of spray dried W-Co salt powders was studied by TG, XRD, SEM, TEM and FT-IR. Spray dried W-Co salt powders were calcined for 1 hour in the temperature from$ 350^{\circ}C$ to $800^{\circ}C$ in atmosphere of air. At the temperatures over $600^{\circ}C$, spherical $CoWO_4/WO_3$ composite oxide powders were obtained. The primary particle size of W/Co composite oxide powders increased with increasing thermal decomposition temperature due to the particle growth. The observed crystallite size by TEM was in the range of 60nm and that of $CoWO_4$ calculated by Scherrer's formula at $800^{\circ}C$ was smaller than 55nm. The crystallite site was identified by XRD and TEM.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1273-1285
• /
• 2018

The aim of this study is to determine the some physicochemical (proximate composition, pH and $a_w$ values) and reconstitution (wettability, dispersibility and solubility index (SI)) properties of spray-dried bone broth powder (BBP) along with the effects of the addition of different carrier agents. Subsequently, the powdered products were stored to determine the storage stability (pH, lipid oxidation, color, browning index) for 3 mon at $-18^{\circ}C$. For this purpose, firstly marrow-containing bones (Os femur and Os humerus) have been boiled to get the bone broth. Three different emulsions were respectively prepared (1) 20% maltodextrin (MD) added BBP, (2) 20% whey powder isolate (WPI) added BBP and (3) 10% MD and 10% WPI added BBP and the emulsions were dried using a spray-dryer with $185^{\circ}C$ inlet and $95^{\circ}C$ outlet temperature. The proximate composition and reconstitution properties of BBP were found statistically different (p<0.05) depending on the use of different carrier agents. MD added BBP showed uniform and smooth morphology. The color, browning index, thiobarbituric acid reactive substances (TBARS) and pH values of BBP significantly changed (p<0.05) during storage. In conclusion, both the results of physicochemical and storage period analyses showed that the most suitable encapsulation material in the production of the bone broth powder is MD.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1139-1144
• /
• 2004

In Exp. 1, a total of 36 pigs (6.55$\pm$0.10 kg average initial body weight and 21 d average age) were used in a 14 d growth study to determine the effects of replacing spray-dried plasma protein (SDPP) with spray-dried egg protein containing specific egg yolk antibody (SDEP) on growth performance and nutrient digestibility in weaned pigs. The pigs were blocked by weight and assigned to treatments based on sex. There were three pigs per pen and four pens per treatment. Dietary treatments were 0, 3, or 6% SDEP and contained 6, 3, or 0% SDPP, respectively. Through the entire experimental period, average daily gain (ADG), average daily feed intake (ADFI), and gain/feed tended to decrease as the concentration of SDEP increased in the diets. However, there were no significant differences among the treatments (p>0.05). As the addition of SDEP in the diets increased, apparent digestibilities of dry matter (DM) and nitrogen (N) were decreased without significant (p>0.05). For Exp. 2, 36 pigs (2.63$\pm$0.04 kg average initial body weight and 10 d average age) were used in a 14 d growth study to determine the effects of antibiotic replacement with SDEP on growth performance and nutrient digestibility in early-weaned pigs. The pigs were blocked by weight and assigned to treatments based on sex. There were three pigs per pen and four pens per treatment. Dietary treatments included 1) ANTIBIOTIC (corn-dried whey-soybean meal based diet+0.08% antibiotics, 4 mg of tiamuline hydrogen fumarate; 10 mg of sulfadimidine per kg of complete diet), 2) SDEP0.1 (corndried whey-SBM based diet+0.1% SDEP), and 3) SDEP0.2 (corn-dried whey-SBM based diet+0.2% SDEP). ADG and gain/feed of pigs fed the SDEP0.2 diet were higher than for pigs fed the ANTIBIOTIC diet without significant (p>0.05). Pigs fed the diet with SDEP0.2 tended to have increased apparent digestibilities of DM and N compared to pigs fed the ANTIBIOTIC diet without significant (p>0.05). In conclusion, the dietary SDEP seemed to be partial replacing the SDPP portion of high nutrient dense diet for weaned pigs. Also, dietary SDEP seemed to be approximately 0.2% or more when the pigs fed the antibiotic-free diet for early-weaned pigs.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.234-240
• /
• 1997

Agar has widely been used as medical aids and food ingredients due to its pecular physicochemical and rheological properties. In this paper, the effects of spray drying and extrusion drying on functional properties of agar were investigated to clarify the sol-gel transition mechanism at low temperature and microstructure of agar gel by measuring phase transition by differential scanning calorimetery, structural differences by light microscope and scanning electron microscope observation. The lowest endothermic onset(To), peak(Tp), conclusion(Tc) temperature and enthalpy($\Delta$H) using differential scanning calorimetery were showed in extrusion-dried agar wic were checked in 41.30, 61.72, 80.50 and 0.73cal/g. In cases of unmodified and spray-dried, the values were 81.20, 95.51, 112.14 and 3.22cal/g, and 60.11, 76.45, 89.54 and 1.53cal/g, respectively. When all samples were reheated using differential scanning calorimetery after gelling fully, no significant differences of endothermic To, Tp, Tc and $\Delta$H appeared. The surface structure of unmodified agar powder observed by light microscope and scanning electron microscope appeared a continuous surface without any indication of small pores, gaps or point of discontinuity. In cases of spray-dried agar, the unstable structures with pores was resulted. The microstructures of extrusion-dried agar, however, was solid with large gaps and areas of discontinuity in the surface. From the results above, it was suggested that significant differences in phase transition and surface microstructures were clearly related to the physicochemical changes and rheological properties, solubility and gelling ability of the types of agar gel.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.569-573
• /
• 2006

This study was conducted to manufacture new product containing high soluble polysaccharide from Hericium erinaceus extract. The new products were prepared for powder, granulate and tablet form by spray drying process. The high soluble powder form was mixed with sub-ingredients and then granulated form by granulator and molded as tablet form by a press molder respectively. Moisture content of products was following order; spray dried powder > granule > tablet Total sugar content of produce was observed to 19.14% in spray dried powder, 37.58% in granulate and 35.76% in tablet. The hue angle of products was $85.5^{\circ}$ in spray dried powder, $95.37^{\circ}$ in granulate and $94.67^{\circ}$ in tablet. The absorption capacity was higher in powder, but the product type did not affect the color.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1322-1326
• /
• 1997

Characteristics of viscosity and spray dried particles for several polysaccharides were studied to investigate the possibilities as wall materials for microencapsulation. Viscosities of 10% maltodextrin, 10% gum arabic, 10% dextran, 1% gum locust bean, and 1% gum karaya were 2.2 mPa.s, 9.2 mPa.s, 13.0 mPa.s, 4660.0 mPa.s, and 77.0 mPa.s, respectively. In scanning electron micrographs for spray dried polysaccharides, gum arabic had spherical shapes at 20% and 30% emulsion concentration, while trailed shapes at 40%. Maltodextrin had uniform spherical shapes at 30%, while aggregated form with various kinds of capsule sizes at 40%. Dextran had spherical shapes at 20%, while trailed fibrous shapes at over 30%. Mixed polysaccharides with gum arabic:maltodextrin (1:3, w/w) had uniform spherical shapes at 20%, 30%, and 40% with increasing diameter with increasing concentration.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.416-423
• /
• 1993

Milk powders were made by several drying methods and raw materials, and rheological properties of milk powders were investigated by an Instron Universial Testing Machine. The results obtained are summarised as follows. Bulk density of the drum dried whole milk powder was $0.382\;g/cm^3$ and was higher than that of other milk powders. The Hausner ratio, angle of repose and compressibility of the spray dried skim milk powder were 1.127, $32.5^{\circ}$ and 0.029 respectively. This result indicated that skim milk powder showed free flowing characterristics. The compressibility of the drum dried whole milk powder was decreased by the decrease of moisture content. Compressibility of the milk granule was 0.056 and was lower than that of milk powder. The spray dried milk powder of a grobular shape had higher solidity than the freeze or drum dried milk powder. The drum dried milk powder particles consist of irregular shape.

• Journal of Life Science
• /
• v.34 no.5
• /
• pp.296-303
• /
• 2024

Vinegar is a fermented food product created by fermenting various sugar- and starch-containing ingredients with microorganisms. It contains a variety of organic acids, sugars, amino acids, esters, and other compounds that contribute to its unique sensory properties. Vinegar is known for its potential benefits, including aiding digestion, lowering blood sugar levels, anti-obesity effects, and antioxidant properties. It is also believed to contribute to improving alkaline body conditions. This study was conducted to develop functional dried vinegar powder from naturally fermented vinegars. Unripe apple, brown rice, and black chokeberry (aronia) were fermented using Gluconacetobacter xylinus for 90-180 days. The filtrate vinegar was spray dried with 37.46% maltodextrin, 5% glucose, 1% citric acid, and 0.04% vitamin C. Analysis of the acidity, color difference, water and soluble solid content, and heat stability of dried vinegar (DV) confirmed that spray drying is a suitable method for powder production. Moreover, the DVs exhibited excellent sensory attributes and solubility. Among the DVs, aronia-DV showed the highest 1,1-diphenyl-2-picryl hydrazyl and 2,2-azobis (3- ethylbenzothiazoline-6-sulfonate) radical scavenging activity (36.7% and 75.3%) and reducing power (0.334) at 0.5 mg/ml concentration, respectively. The nitrite scavenging activity was highest in brown unripe apple-DV, followed by aronia-DV and brown rice-DV. In the anti-thrombosis activity assay, aronia-DV showed the highest prothrombin inhibition. The brown rice-DV exhibited lipid accumulation inhibitory activity in 3T3-L1 adipocytes without cell cytotoxicity. Our results suggest the potential for commercialization of dried vinegar, highlighting its diverse benefits and applications.

• Journal of Powder Materials
• /
• v.5 no.1
• /
• pp.28-34
• /
• 1998

Plasma sprayed ceramic coatings are widely used in various industrial fields to improve their properties or to reduce the production cost. The ceramic powders for plasma spray coating have been mainly manufactured by spray drying or fused+crushed process. In this study, chromium oxide which has better mechanical properties than those of the other ceramic was selected and agglomerated chromium oxide powders for plasma spray coating were produced by spray drying process with a various processing condition. The large hollow powders and the harsh surfaced powders are formed at high slurry feed rate more than 163 g/min. and low binder concentration less than 2wt%, respectively. These powders cause the considerable decrease of flowability and apparent density. The powders produced by spray drying process have the spherical shape with the mean size of 45 ${\mu}m$, but these are shown lower apparent density and flowability than the powders produced by fused+crushed powders. The plasma spray coated layers by spray dried powders are shown a different microstructure with that by fused+crushed powders in porosity shape, but their properties such as density, hardness and bond strength are similar.

• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.22-27
• /
• 2004

The Indium Tin Oxide(ITO) nano powders were prepared by spray drying and heat treatment process. The liquid solution dissolved Indium and Tin salts was first spray dried to prepare chemically homogeneous recursor powders at the optimum spray drying conditions. Subsequently, the precursor powders were subjected to eat treatment process. The nano size ITO powders was synthesized from the previous precursor powders and the npuities also were decreased with increasing heat treatment temperature. Furthermore, the lattice parameter of TO nano powders was increased by doping Tin into Indium with increasing heat treatment temperature. The par icle size of the resultant ITO powders was about 20∼50nm and chemical composition was composed of In:Sn =86:10 wt.％ at 80$0^{\circ}C$.