• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.279-284
• /
• 2013

본 논문에서는 경제적이고, 채널 확장성이 용이하며, 다양한 성능시험에 대응이 가능한 솔레노이드 타입의 인젝터 컨트롤러를 연구 개발하고 그 성능을 평가하였다. 개발된 컨트롤러는 임베디드 시스템에 기반을 두고 있으며, 인젝터에서 고압으로 분사되는 연료의 분사 타이밍 및 분사량에 대한 정밀제어는 물론 솔레노이드의 전기적인 특성을 측정하여 인젝터의 성능평가도 가능하다. 또한, 부가적으로 인젝터의 분무 형태를 정밀하게 촬영할 수 있는 광원과 초고속 카메라의 정밀시간제어도 동시에 가능하도록 하였다.

• 한국분무공학회지
• /
• 제11권1호
• /
• pp.39-47
• /
• 2006

In-cylinder flows in a motored 3.5L four-valve SI engine were investigated quantitatively using three-component LDV system, to determine how engine configuration affects the flow field. The purpose of this work was to develop quantitative methods which correlate in-cylinder flows to engine performance. For this study, two distinct intake/piston arrangements were used to examine the flow characteristics. Quantification of the flow field was done by calculating two major parameters which are believed to characterize adequately in-cylinder motion. These quantities were turbulent kinetic energy(TKE) and tumble ratio in each plane at each crank angle. The results showed that in-cylinder flow pattern is dominated by the intake effects and two counter rotating vortices, developed during the intake stroke, produced relatively low tumble ratio. Therefore, the applicability of these quantities should be carefully considered when evaluating characteristics resulting from the complex in-cylinder flow motions.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.60-66
• /
• 2009

This study presents an experimental investigation of the shallow water impact of a box type structure. The analysis was done based on the video images captured by a high speed camera, the flow field obtained by PIV (Particle Image Velocimetry), and pressure measurements in the divided region. The video images showed quite good agreement with the description given by Korobkin. The PIV measurements of the velocity field provided a clear view of the flow pattern for all three stages. The pressure was measured at the bottom of the tank with strain gauge type pressure gauges. The pressure measurements showed the characteristics of divided regions.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.7-12
• /
• 2016

In this study, to research in-cylinder flow characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle. 3D simulation study were used 6 different intake valve profile with $CAD10^{\circ}$ gap for retard intake valve closing timing. Comparison of In-cylinder flow pattern characteristic were accompanied between Base and LIVC. And the efficiency of volume and the work of compression were analyzed with simulation study. When intake valve closing angle was retarded in $CAD50^{\circ}$, the pressure in cylinder was decreased about 12~13 bar and volume efficiency was reduced about 16%. The efficiency of volume and the work of compression were reduced on LIVC.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.24-30
• /
• 2003

An experimental study was performed to investigate the influence factors of drop formation in electrohydrodynamic atomization. The mode of electrohydrodynamic atomization depended on the various factors such as the flow rate of the liquid, the inner diameter of the nozzle, the distance between the nozzle tip and the ground electrode, the shape of the ground electrode. and the applied high voltage. This work was performed to investigate the experimental analysis for the flow pattern visualization of droplets, and the relationship between voltage application and the behavior of liquid atomization. Uniform drops of different sizes can be obtained at the inception of the spindle mode by charging the flow rate and the electric field. The drop size also decreased when the flow rate was raised for the spindle mode. The whipping motion occurred beyond 7kV and before the corona started to take effect.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.91-100
• /
• 1998

NiCrAlY/YSZ(8wt%$Y_2O_3-ZrO_2$) functionally graded thermal barrier coating (FGC) layers on a Co-base superalloy (HAYNESS 188) substrate were fabstrate were fabicated using Ar shielded single torch air plasma spraying method. Functional grading with the stepwise compositional change throughout layer thickness. Microstructural observation trvealed a successful fabrication of NiCrAlY/YSZ FGC. From the results of the curvature measurement, adhesive strength measurement and thermal shock test for the FGC, it was concluded that the optimum conditions of functionally graded coating layer thinkness and compositional pattern exit to enhance the properties of FGC, which is closely related to the internal residual stess distribution witin it.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• 항공우주기술
• /
• 제1권1호
• /
• pp.128-134
• /
• 2002

고속비행 중의 공력가열과 같은 외부 열전달로부터 외피 구조물과 내부 탑재물을 보호하기 위하여, KSR-III의 외피에 단열처리가 필요하였다. 일련의 시험과 분석을 통하여 선정된 단열재인 BMS 10-102는 스프레이 가공 형식의 점착성 물질로서 외피에 도포 후 경화시키며, 낮은 열전달율과 낮은 밀도와 같은 특성을 지녀 우수한 단열효과를 기대할 수 있다. 본 연구에서는 KSR-III 기본형 설계에서 대표적인 다층구조인 노즈 페어링부의 honeycomb 샌드위치 구조에 대한 단열해석을 수행하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제10회 학술강연회논문집
• /
• pp.27-27
• /
• 1998

연구소기내에서 원활한 연소를 위하여 액체의 균일하고 완전한 미소분열 문제는 매우 중요한 연구분야라 할 수 있으며, 특히 항공기용 가스터빈 연소기에 사용되는 분사 시스템의 설계시에는 단순한 미소분열 문제뿐 아니라 시동성 향상, 화염의 안정화, 공해물질의 저감 등은 물론 압력 차가 작고 유량범위가 넓으며 공기를 이용한 미립화(Atomization)의 효율이 낮은 영역, 즉, 시동(Start-up) 및 플레임 아웃(Flame-out)근처의 영역에서도 효율적인 미립화가 이루어지도록 고려되어져야 한다.

• 한국임상약학회지
• /
• 제20권3호
• /
• pp.205-212
• /
• 2010

The prescription sheets for outpatients from July 2008 to June 2009 from 7 community pharmacies in Ulsan City were surveyed for the anti-inflammatory drug (AID) prescription pattern. The AID prescription rate of pediatricians and ENT physicians were 30.0% and 34.8%, respectively. The oral steroidal anti-inflammatory drugs (SAIDs) were prescribed as much as 3.9% by pediatricians and 10.3% by ENT physicians. The chiefly prescribed oral SAID was prednisolone in pediatric clinics and methylprednisolone in ENT clinics. Meanwhile the prescription rate of oral non-steroidal anti-inflammatory drug (NSAID) was 22.5% by pediatricians and 21.4% in ENT physicians. The most favorable NSAIDs were propionate derivatives in both clinics. In case of externally-applied SAIDs, the prescription rate of pediatricians was 3.6% and that of ENT physicians was 2.8%. Among them, nasal spray, inhalant and gargle formulations for upper respiratory infection (URI) treatment occupied 35.8% of externally-applied SAIDs in pediatric clinics and 59.7% in ENT clinics. Further, it was observed that ENT physicians favored much stronger SAIDs in Group III of ATC classification (75.4% of externally-applied SAIDs) than pediatricians (49.2%). In the survey of AID combination rate, pediatric clinics showed much lower rate (1.4% of total AID prescriptions) than ENT clinics (7.5%). Among them, the combination rate of oral SAID and oral NSAID by ENT physicians (52.2% of total AID combinations) was much higher than pediatricians (36.6%), which might be over-prescription of AID agents. In conclusion, the AID prescription rate as well as AID combination rate, especially in SAID prescriptions, was much higher in ENT than pediatric clinics, which implies the higher confidency on AID drugs of ENT physicians even though the severity of patient's symptom could be considered.