• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.101-108
• /
• 2011

The small and medium sprayer has developed to spray well fruit trees and roadside trees with pesticides for pests control within 60 meters. This study was carried out to analyze and evaluate its performance using image processing. While it sprayed with pesticides on the area of 20m in width and 60m in length, it was experimented 5 places by 5m from 0 to 25m width and 6 places by 10m from 10 to 60m length. The experimental image data of each sheet on places were averaged after binarization process. According to the image data, it was sprayed on all working area. However, when sprayer moved 0.3m/s velocity, the place at 15m of width and 30m of length was sprayed more than any other sprayed area, but the place at 15m of width and 60m of length was sprayed less.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.299-304
• /
• 2007

Surveying, laboratory and field trial were performed to elucidate the causes of non-spinning syndrome of silkworm, Bombyx mori, abnormal symptoms of silkworm instars observed in certain sericultural fanning region. Mortality and growth of silkworm was still influenced by feeding the mulberry leaves sprayed with 10,000 fold diluted solution of standard spray of diflubenzuron WP (25%). Mortality and growth of silkworm fed with diflubenzuron-sprayed mulberry leaves with recommended spray solution were entirely affected even six weeks after spraying irrespective to the instars. Larval period of 5th instar and cocooning duration of silkworm was not affected in case 50m of buffer zone has maintained in near-by orchard field sprayed with diflubenzuron WP (25%). However, survival rate of pupae was not influenced in case 100 m of buffer zone has kept. Insect growth regulating insecticides were required to keep a certain distance of buffer zone when sprayed with water-diluted solution, 100 m from the application site at least in order to prevent contamination of the spraying drift by the chemicals.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.351-356
• /
• 2008

This study was carried out to assess adoptability and environment impacts of ultra low volume (ULV) pesticide spray solutions aerially sprayed by manned-helicopter. Uniformity of the deposited amount in paddy fields was uneven, showing $3.1{\sim}4.7$ times differences among surveyed sites. Drifting distance of aerially sprayed droplets from the target area was within 30 m in the wind direction and 20 m in the opposite direction. Most of the aerially sprayed pesticides were deposited in/on rice plants, while those in submerged paddy water and soil were relatively small. The degradation rate of the deposited pesticides was in the decreasing order of rice plants, paddy water and soil. Soil residues of pesticides in the aerially sprayed rice paddy fields after harvest ranged from non-detected to 0.201 mg/kg. However, no pesticides were detected in brown rice and rice straw. No phytotoxic symtoms were observed in rice plants and nearby non-target crops by the sprayed pesticides.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.547-556
• /
• 2013

Recently, golf courses have increased over the years because golf became popular leisure sport. Various environmental problems have been then issued by a golf course during constructing and running them. A problem of pesticide, which is serious among various environmental problems, from golf course has harmful effect on surrounding area and makes human suffer from acute and chronic diseases. Pesticides are used for the cost-effective managing of golf course and the amount of pesticides also increases as the number of golf course increase. Since the assessment of pesticides on near-by surrounding has been focused on water and soil media, studies related to atmospheric dispersion have been hardly attempted. The method to assess an impact of pesticide nearby agricultural production by the atmospheric dispersion using AGDISP(AGricultural DISPersal) model was developed and applied to the actual planned golf course located in Hongcheon, Gangwon. For implementing AGDISP, parameters were investigated from the golf course's land use planning map, pesticide spray device, Hong-Cheon weather station and etc. First of all, a kind of pesticide, a form of spraying pesticide, geographical features, weather data, and distance(golf course to plantation) were investigated to understand how to work these parameters in AGDISP. Restricted data(slope angle, droplet size distribution and solar insolation) sensitivity analysis of these parameters to estimate effect of pesticide nearby a plantation and a high relative contribution data of analyzed data was selected for input data. Ethoprophos was chosen as the pesticide used in the golf course and the amounts of pesticide deposition per annual agricultural productions were predicted. The results show that maximum amount of pesticide deposition through atmospheric dispersion was predicted $2.32{\mu}/m^2$ at 96 m where the nearest organic plantation exists. The residues of pesticide were also estimated based on the annul production of the organic and the deposition amount of the pesticide. Consequently, buckwheat, wheat and millet were likely to exceed maximum residue limits for pesticides in foods(MRL) and sorghum, corn and peanut were likely to exceed MRL by organic farming as well.

• Journal of ILASS-Korea
• /
• v.23 no.3
• /
• pp.149-153
• /
• 2018

The present study investigates the heat transfer characteristics of droplet growth during dropwise condensation on the hydrophobic copper surface. We use the copper specimen coated by the self-assembled layer and conduct the real-time measurement of droplet size and spatial distribution of condensates during condensation with the use of the K2 lens (long distance microscope lens) and CMOS camera. The temperatures are measured by three RTDs (resistance temperature detectors) that are located through the holes made in the specimen. The surface temperature is estimated by the measured temperatures with the use of the one-dimensional conduction equation. It is observed that the droplets on the surface are growing up and merging, causing larger droplets. The experimental results show that there are three distinct regimes; in the first regime, individual small droplets are created on the surface in the early stage of condensation, and they are getting larger owing to direct condensation and coalescence with other droplets. In the second and third regimes, the coalescence occurs mainly, and the droplets are detached from the surface. Also, the fall-off time becomes faster as the surface wettability decreases. In particular, the heat transfer coefficient increases substantially with the decrease in wettability because of faster removal of droplets on the surfaces for lower wettability.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.1-8
• /
• 2017

In order to analyze combustion characteristics of methane-oxygen diffusion flame in a model combustor, combustion experiments were carried out under various spray conditions of propellant scrutinizing combustion stability limit and flame shapes. As the propellant approached the theoretical equivalence ratio condition, a stable detached flame was observed even under high oxygen Reynolds number. And the length of the visible flame increased and the lift-off distance of the flame exhibited a tendency toward decrease. Due to the swirl effect of the propellant by the swirl-coaxial injector, a wide and short flame was produced. Thus, it may be appropriate to employ the swirl-coaxial injector in thrusters having a limited physical dimension.

• Parasites, Hosts and Diseases
• /
• v.43 no.3 s.135
• /
• pp.75-92
• /
• 2005

Extensive previous studies on taxonomy, behavior/bionomics and control of Anopheles sinensis are reviewed and summarized. Recent molecular identification revealed that the population of An. sinensis complex includes An. sinensis, An. pullus, An. lesteri and at least two new species, and An. yatsushiroensis is synonmy of An. pullus. An. sinensis is the main vector specie of vivax malaria in Korea. Larvae of An. sinensis breed in wide range of habitats which are naturally-made clean water, stagnant or flowing; main habitats include rice fields, ditches, streams, irrigation cannals, marshes, ponds, ground pools, etc. Their host preferences are highly zoophilic. Human blood rate is very low ($0.7-1.7\%$); nevertheless An. sinensis readily feeds on man when domestic animals are not found near by. They feed on hosts throughout the night from dusk to dawn with a peak period of 02:00-04:00 hours; they are slightly more exophagic (biting outdoors); much larger numbers come into the room when light is on. Main resting places are outdoors such as grasses, vegetable fields and rice fields. A mark-release-recapture study resulted that $37.1\%$ was recaptured within 1 km, $29.4\%$ at 1-3 km, $21.1\%$ at 3-6 km, $10.3\%$ at 6-9 km and $2.1\%$ at 9-12 km distance. An. sinensis hibernate outdoors (mostly under part of dense grasses) during October-March. At the end of the hibernation period (March-April) they feed on cows at daytime. Until today any single measure to effectively control An. sinensis population has not been found. Indoor residual spray with a long-lasting insecticide can not reduce vector population densities, but shorten their life spans in some degree, so contributes to malaria control.

• Composites Research
• /
• v.29 no.3
• /
• pp.104-110
• /
• 2016

This paper reports a novel method for simultaneous exfoliation of graphene and dispersion of carbon nanotube by using intercalation method. In common, graphene flake and carbon nanotubes can be produced through individual exfoliation or debundling process, but the process require significant amount of time. Here, potassium sodium tartrate was thermally intercalated into graphite and carbon nanotube bundle for simultaneous exfoliation and dispersion of graphene and carbon nanotubes. We confirmed expansion of interlayer distance via XRD, and also found that oxidation level of the exfoliated materials were significantly low (below 8.3 at%). The produced materials are fabricated in to conductive composite film via vacuum filtration and spray deposition to show enhancement of conductive properties.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2002

Various kinds of aerosols such as a mixture of hairspray resin and its solvents, a perfume, a soap water, and ask in-lotion were sprayed onto the contact lens which was mounted on the eye-model made of wood, varying the parameters as the distance between nozzle and contact lens and the spraying time duration. In the case of both the hairspray and the perfume including an ethanol as solvents, the shape of contact lenses has changed tremendously Jess than 1 minute after the exposure to the aerosol particles and then it continued until the lens surfaces were completely flipped over. Driving force for the lens distortion seems to be the expansion coefficient difference between the inner and outer surface of lens, which was caused by the heat of vaporization of ethanol included in the aerosol and subsequent temperature decrease induced on the lens surface.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.85-94
• /
• 1992

The size, morphology and distribution of pores which affect on the physical properties of thermal barrier coatings were investigated to find the relationship with spraying parameters. The plasma-sprayed zirconia coatings contained numerous micropores as well as macropores which were appeared as spherical and irregular pores, and cracks. The pore formation process and its characteristics were varied with spraying distance. Porosity itself was varied with spraying parameters such as spray gun current, gas flow rate and the gas used(Ar or $N_2). The Porosity of coatings was ranged from 10 to 18% with the variation of spraying conditions. The relative hardness measured by the scratch test, showed strong dependence on the porosity of coatings rather than spraying parameters.