• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.340-343
• /
• 2002

Electromagnetic(EM) radiation problems and their possible solutions are addressed in this paper for the split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective fur reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.75-80
• /
• 2002

Signal integrity problems and their possible solutions are addressed in this paper for split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective for reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.43-50
• /
• 2010

본 논문에서는 시스템 모듈에서 발생하는 EMI를 줄이기 위해 분할된 전원/접지 평판 구조에 의해 발생하는 방사성 방출(Radiated emission)을 분석하였다. 분석을 위해 다양한 조건을 갖는 시험 기판(Test board)에 대한 자기장과 전기장을 시뮬레이션하고 측정하여 비교하였다. 이 분석 결과는 입력 신호의 주파수 대역에서 반사계수의 위상이 $0^{\circ}$에 근접하도록 하며, 입력 신호의 주파수와 분할된 전원/접지 평판 구조의 공진주파수가 일치하지 않도록 분할된 접지 갭의 폭과 위치를 결정함으로써 방사성 방출을 줄일 수 있음을 보여준다. 또한, 스티칭 커패시터(Stitching capacitor)를 사용하여 방사성 방출을 저감시킬 수 있으며, 방사성 방출을 효과적으로 저감시키기 위해 입력 신호의 주파수에서 반사계수의 크기를 낮추고 위상이 $0^{\circ}$에 근접하도록 스티칭 커패시터의 값과 위치를 결정할 필요가 있음을 알 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.150-155
• /
• 2004

Universal design equations are presented for the H-plane T-junction power divider with a circular conducting post in a rectangular waveguide. For a given operating frequency and power split ratio, the post offset from the T-junction center line, the distance between the post and the waveguide wall, and the post diameter can be adjusted to obtain a minimum reflection at the input waveguide. Optimum values of the post offset are given in terms of the normalized frequency and the power split ratio. Corresponding values of the post diameter and the distance of the post from the waveguide wall are given in terms of the normalized frequency and the post offset.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.120-122
• /
• 2015

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna (MSA) based on surface wave suppression. The back radiation of the MSA is significantly reduced by using the meandered ground plane edges and placing split-ring resonators (SRRs) in the middle of the meandered slots. By loading SRRs near the center of the meandered ground plane edges, some parts of the diffracted back-lobe power density can be reduced further. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 18 dB has been achieved experimentally for our proposed MSA.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1440-1448
• /
• 2019

In wireless power transfer systems, it is important to design resonant energy links in order to increase the power transfer efficiency and to obtain desired system performances. This paper proposes a method for designing and analyzing the resonant energy links in a series-series configured IPT (inductive power transfer) system using the FOM-rd plane. The proposed FOM-rd graphical design plane can analyze and design the voltage gain and the power efficiency of the energy links while considering changes in the misalignment between the coils and the termination load condition. In addition, the region of the bifurcation phenomena, where voltage gain peaks are split over the frequency, can also be distinctly identified on the graphical plane. An example of the design and analysis of a 100 W inductive power transfer system with the proposed method is illustrated. The proposed method is verified by measuring the voltage gain and power efficiency of implemented hardware.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.457-463
• /
• 2005

This paper presents a method for analyzing irregular shaped power distribution networks. The irregular shaped metal-dielectric-metal plane is split into several piece of rectangular segments to calculate the impedance of the irregular shaped plane. Impedance matrix for each rectangular segments is calculated using the Mobius transform method to reduce the calculation time. Then the segmentation and do-segmentation method is applied to the piece of rectangular segments. Applied to the 6 inch by 5 inch size irregular shaped board, the proposed method shows 10 times faster than the electromagnetic or circuit analysis method.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.732-739
• /
• 2005

본 논문에서는 E-평면 T형 분기 도파관을 갖는 Ka대역(20/30 GHz) 다이플렉서의 설계 및 구현에 관해 논하였다. 본 논문의 도파관 다이플렉서는 송신 필터 및 수신 필터를 E-평면 T형 분기 도파관으로 연결하여 E-평면으로 대칭이 되도록 하였다. T형 분기 도파관을 E-평면으로 선택한 이유는 제작시 생기는 절단면을 전류 밀도가 가장 낮은 지역에 두어 PIM(Passive Intermodulation) 레벨을 줄이기 위해서이다. 본 논문의 다이플렉서는 등가 모델을 사용하여 최적 설계를 수행함으로써 해석 시간을 줄이고자 하였다. 또한, 고전력 전송이 가능한 구조로 설계한 후 멀티팩션 해석을 수행하였으며, 해석 결과는 12 dB 마진을 확보하여 ESA/ESTEC 권고 사항을 만족함을 보였다. 제작된 다이플렉서는 전기적 성능 시험 결과를 통해 송수신 대역에서 반사 손실 22 dB 이상, 삽입 손실 0.20 dB 이하, 그리고 -40 dB 이하의 격리도 특성을 가져 요구 사항을 만족함을 보였고, 이로써 설계 결과가 검증되었다.

• 대한전자공학회논문지TC
• /
• 제48권1호
• /
• pp.92-96
• /
• 2011

본 논문에서는 CRLH 구조의 대역통과여파기를 이용하여 선형성이 개선된 전력증폭기를 구현하였다. CRLH 구조를 이용한 대역통과여파기외 구조는 윗변에는 인터디지트 형태의 신호선으로, 아랫면에는 CSRR 형태의 구조로 이루어져 있으며 via를 통해 윗면과 아랫면이 연결되어 있다. 전력증폭기의 동작대역에서 손실을 최소화하고 CRLH 전송 선로를 이용하여 2차 고조파 성분을 제한시켜서 전력증폭기의 선형성을 개선하였다. 2.l4GHz에서 동작하는 전력증폭기의 측정된 출력 전력은 33dBm 기준으로 2차 고조파는 -53.527 dBc, 3차 혼변조 신호는 -36.16 dBc, 부가전력효율은 33.14% 가 측정되었으며, 이는 기존의 전력증폭기에 비해 2차 고조파는 약 16 dB, 3차 혼변조 신호는 약 12 dB 개선되었다.