• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.93-99
• /
• 2014

최근 들어 경제적인 지열에너지 활용을 위하여 에너지 파일의 적용이 확대되고 있다. 특히 더 높은 열 교환 효율을 확보하고자 에너지 파일의 경우 통상적인 U자형 또는 W자형과 같은 라인형 지중 열교환기가 아닌 코일형 지중 열교환기를 매입하는 경우가 늘어나고 있다. 본 연구에서는 매립지 부지에 PHC 코일형 열교환기 형태의 에너지 파일을 설치하고 240시간 동안 현장 열응답 시험(thermal response test)을 실시하였다. 또한 현장에서 지층별로 시료를 채취하여 실내에서 현장 지층 물성으로 시료를 재조성한 후 비정상 탐침법(non-steady state probe method)을 이용하여 지층별 열전도도와 열확산계수를 측정하였고 등가의 열물성으로 환산하였다. 실험 결과 현장 열응답 시험에 의한 지반의 열전도도와 실내 탐침법으로 측정된 지반의 열전도도는 5%내에서 일치하였으며 아울러 지반의 또 하나의 중요한 설계인자인 등가 열확산계수의 측정방법도 제시하였다.

• 대한치과보철학회지
• /
• 제49권2호
• /
• pp.138-144
• /
• 2011

연구 목적: 본 연구는 최근 개발된 알칼리 이온수 e-WASH의 의치에 부착된 미생물 의치세정 효과에 대해 위상차현미경을 이용한 미생물 관찰법을 통하여 알아보고자 하였다. 연구 재료 및 방법: 실험군 41개, 대조군 26개의 의치를 무작위로 선정하여 실험군에서는 알칼리 이온수e-WASH로, 대조군에서는 수돗물에 5분간 침지 전, 후 의치 내면의 치면세균막을 채취하였다. 위상차현미경으로 구강미생물의 형태적, 종류별 양과 운동성에 대하여 세정 전, 후별 구강미생물의 상태를 관찰하였다. 결과: 1. 알칼리 이온수 e-WASH로 의치를 세정한 실험군에서는 세정 전보다 세정 후 구균의 양, 간균의 양, 간균의 운동성, 실사균의 양, 실사균의 운동성, 콤마/나선균의 양, 콤마/나선균의 운동성 등 모든 조사항목에서 감소하였다 (P<.05). 한편 대조군에서는 구균의 양은 감소하였으나 (P<.05), 다른 조사항목에서는 모두 세정 전, 후 간에 차이가 없었다. 2. 알칼리 이온수e-WASH로 의치를 세정한 실험군에서는 구균의 양, 간균의 양, 간균의 운동성, 실사균의 양, 실사균의 운동성, 콤마/나선균의 양, 콤마/나선균의 운동성 등 모든 조사항목에서 수돗물로 의치를 세정한 대조군보다 각 구강미생물의 양과 운동성이 적게 나타났다 (P<.05). 결론: 위의 결과를 통해 알칼리 이온수 e-WASH가 의치표면의 각종 미생물의 양과 운동성을 효과적으로 감소시키므로 의치세정제로 추천된다.

• Earthquakes and Structures
• /
• 제7권4호
• /
• pp.571-586
• /
• 2014

This paper presents experimental and numerical study on seismic performance of a super tall steel tower structure. The steel tower, with a height of 388 meters, employs a steel space truss with spiral steel columns to serve as its main lateral load resisting system. Moreover, this space truss was surrounded by the spiral steel columns to form a steel mega system in order to support a 12-story platform building which is located from the height of 230 meters to 263 meters. A 1/40 scaled model for this tower structure was made and tested on shake table under a series of one- and two-dimensional earthquake excitations with gradually increasing acceleration amplitudes. The test model performed elastically up to the seismic excitations representing the earthquakes with a return period of 475 years, and the test model also survived with limited damages under the seismic excitations representing the earthquakes with a return period 2475 years. A finite element model for the prototype structure was further developed and verified. It was noted that the model predictions on dynamic properties and displacement responses agreed reasonably well with test results. The maximum inter-story drift of the tower structure was obtained, and the stress in the steel members was investigated. Results indicated that larger displacement responses were observed for the section from the height of 50 meters to 100 meters in the tower structure. For structural design, applicable measures should be adopted to increase the stiffness and ductility for this section in order to avoid excessive deformations, and to improve the serviceability of the prototype structure.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.228-239
• /
• 2016

CNUSAIL-1은 $4m^2$ 크기의 태양돛을 탑재한 3U 크기의 큐브위성이며, 주 임무는 지구 저궤도에서 태양돛을 성공적으로 전개하고 태양돛을 이용해 Drag Sail을 실현하는 것이다. 또한, 이에 따른 자세와 궤도에 대한 영향을 확인하는 임무를 수행한다. 본 논문에서는 CNUSAIL-1의 태양돛에 사용되는 박막과 붐의 재질과 물성치에 관련된 실험을 수행하며, 이를 통해 태양돛 박막의 반사율/투과율 요구도를 확인하고, 박막과 붐의 인장강도를 측정함으로서 지구 저궤도 환경에서의 돛 전개 시 발생가능 응력에 대한 안전성을 확인한다. 또한, 태양돛의 전개장치를 개발 제작하여 우주환경을 모사한 지상시험을 수행함으로서 태양돛 전개의 가능성을 검증하였으며, 태양돛의 탑재와 접기 방법에 따라 비교 전개하는 실험을 통하여 접기방법을 결정하고, Spiral spring 두께에 따른 전개실험과 각속도 시험을 수행하여 실제 전개 시에 생길 수 있는 위성체에 대한 영향성 등을 살펴보았다.

• 대한치과의사협회지
• /
• 제48권9호
• /
• pp.680-687
• /
• 2010

The purpose of this study was to compare post cementation efficacy according to the different adhesive systems and cement delivery methods. A total of 40 extracted human single-rooted premolar teeth were randomly divided in four groups according to the two luting agents of Unicem applicap (3M ESPE, St. Paul, MN, USA) or Variolink II (Ivoclar Vivadent, Liechtenstein) and cement delivery methods of direct cement application or lentulo spiral application. After restoration using glass?fiber posts, the samples were embedded in acrylic resin. Three sections of 2 mm thickness were prepared from each specimen, and the post in each section was subjected to a push-out test. The data were analysed statistically at significant level of 95%. The Unicem had significantly higher push-out bond strength than Variolink and the lentulo spiral application made higher bond strength (p<0.05). Adhesive failure between cement and dentin was predominant in all groups. The Unicem of self-etch system and cement delivery using lentulo spiral showed clinically acceptable and comparable bonding strength for the fiber post.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.89-98
• /
• 2012

이 연구에서는 콘크리트 압축강도에 따른 고강도 나선철근의 횡구속 성능을 평가하고자 하였다. 총 24체의 실린더형 콘크리트 실험체($150{\times}300mm$)를 제작하고 단조 압축하중 실험을 수행하였다. 주요 실험변수는 나선철근의 항복강도와 콘크리트 압축강도로 계획하였다. 나선철근의 항복강도에 따른 횡구속 효과를 효과적으로 평가하기 위하여 나선철근의 외경을 실험체 직경과 동일하게 계획하였다. 실험결과, 나선철근의 횡구속 성능은 나선철근의 항복강도가 증가할수록 그리고 콘크리트 압축강도가 낮아질수록 증가하였다. 또한 기존 해석모델을 이용하여 실험체의 응력-축변형률 관계를 예측한 결과, 해석결과는 나선철근의 항복강도와 콘크리트 압축강도가 증가할수록 정확성이 떨어지는 것으로 확인되었다.

• Journal of Microbiology and Biotechnology
• /
• 제31권4호
• /
• pp.610-620
• /
• 2021

There has been increasing interest in the head and neck squamous cell carcinoma (HNSCC) that is caused by high-risk human papillomavirus (HR-HPV) and has posed a significant challenge to Otolaryngologists. A rapid, sensitive, and reliable method is required for the detection of HR-HPV in clinical specimens to prevent and treat HPV-induced diseases. In this study, a multiple cross-linking spiral amplification (MCLSA) assay was developed for the visual detection of HPV-16. In the MCLSA assay, samples were incubated under optimized conditions at 62℃ for 45 min, and after mixing with the SYBR Green I (SGI) dye, the positive amplicons showed bright green fluorescence while the negative amplicons exhibited no obvious change. The specificity test revealed that the developed MCLSA technique had high specificity and could effectively distinguish all five HPV-16 strains from other pathogenic microorganisms. In terms of analytical sensitivity, the limit of detection (LoD) of MCLSA assay was approximately 5.4 × 101 copies/tube, which was 10-fold more sensitive than loop-mediated isothermal amplification (LAMP) and RT-PCR. The detection results of laryngeal cancer specimens collected from 46 patients with suspected HPV infection in the Liaoning region demonstrated that the positive detection rates of MCLSA and hybridized capture 2 kit were 32.61% (15/46). The true positive rate of the MCLSA assay was higher than that of RT-PCR (100% vs. 93.33%) and LAMP (100% vs. 86.67%). Therefore, the MCLSA assay developed in the present study could be a potentially useful tool for the point-of-care (PoC) diagnosis of HR-HPV, especially in resource-limited countries.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.977-986
• /
• 2009

Sampling disturbance can introduce considerable errors in the laboratory estimation of geotechnical properties of soils, and the results obtained from sophisticated sampling and careful laboratory testing are not matching with field behavior. Therefore, it is advantage to adopt in-situ testing techniques for the estimation of geotechnical parameters. Therefore, Screw plate loading test, one of new field test technologies, has been investigated in this study. This test can be utilized to find out important properties of soils such as load-displacement, elastic modulus, and shear strength. The screw plate loading test modified from the plate loading test is an experiment underneath ground by inserting a spiral type of auger screw. The structure and characteristics of the screw plate loading test device was examined in detail. In addition, The new screw plate loading test device was manufactured to refer the previous studies. The reliability of developing screw plate loading test was examined through the analysis of the laboratory test.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.131-140
• /
• 2001

This study was conducted to develop a garlic separator which could to reduce the labor in preparation of seeding. After consideration of the design criteria of a garlic separator such as no additional conveying device, simple construction and operation, enhancement of separating efficiency, reduction of damage, degree a rotating corn type garlic separator was designed. The effects of design parameters such as height and angle of the inner and outer corns, rotating speed of inner corn on the separating performance of the prototype were estimated. In performance was compared with manual work. The results are summarized as follows. 1. Garlic bulbs were separated by a spiral movement in the gap between inner rotating corn and outer fixed corn. At constant feed rate of garlic bulbs, the capacity of garlic separation increased with increase of rotating speed of inner corn. Especially, the capacity was very high at the rotating speeds of 300 and 400rpm. 2. The damage degree of separated garlics increased with rotating speed of corn within 10%. Above 300rpm, separability of Uisung garlic was about 100% and incomplete separation of Namdo garlic was within 2%. 3. The capacity of prototype garlic separator developed in this study was 30 times as large as that of human being.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1067-1072
• /
• 2009

YBCO coated conductor is named by second generation superconductor tapes. It is different with first generation superconductor tapes. YBCO coated conductor's specific difference with Bi-2223/Ag tape is more strong mechanical durability. This is important role to apply to superconducting machines. For mechanical transforming of YBCO coated conductors, we are using the well designed former. The merit of transformation is several. First, we vary the superconducting characteristics according to mechanical stress. Second, we reduce the volume of superconductor, so we achieve reducing the volume of superconducting machines. On this study, we experiment the transporting current characteristics of one types YBCO coated conductor. YBCO coated conductor with Ie of 70 A and voltage grade of 0.6 V/cm were connected to spiral former to conduct current application test.