• Korean Journal of Radiology
• /
• 제1권3호
• /
• pp.135-141
• /
• 2000

Objective: To compare the clinical utility of the different imaging techniques used for the evaluation of tracheobronchial diseases. Materials and Methods: Forty-one patients with tracheobronchial diseases [tuberculosis (n = 18), bronchogenic carcinoma (n = 10), congenital abnormality (n = 3), post-operative stenosis (n = 2), and others (n = 8)] underwent chest radiography and spiral CT. Two sets of scan data were obtained: one from routine thick-section axial images and the other from thin-section axial images. Multiplanar reconstruction (MPR) and shaded surface display (SSD) images were obtained from thin-section data. Applying a 5-point scale, two observers compared chest radiography, routine CT, thin-section spiral CT, MPR and SSD imaging with regard to the detection, localization, extent, and characterization of a lesion, information on its relationship with adjacent structures, and overall information. Results: SSD images were the most informative with regard to the detection (3.95±0.31), localization (3.95±0.22) and extent of a lesion (3.85±0.42), and overall information (3.83±0.44), while thin-section spiral CT scans provided most information regarding its relationship with adjacent structures (3.56±0.50) and characterization of the lesion (3.51±0.61). Conclusion: SSD images and thin-section spiral CT scans can provide valuable information for the evaluation of tracheobronchial disease.

• Investigative Magnetic Resonance Imaging
• /
• 제16권2호
• /
• pp.103-114
• /
• 2012

목적: 7T 악관절 자기공명상의 개선을 위해 제안된 4 채널 스파이럴 코일과 그를 구동시키기 위한 회로는 자기장의 분포, 송신 전용필드, 신호 대 잡음 비, 그리고 악관절 영상에 대하여 일반적인 단일 루프 형태의 코일과 비교되었다. 대상과 방법: 단일 채널 그리고 4 채널 스파이럴 코일은 단일 루프 형태의 코일에 대해 전자기장 시뮬레이션으로 자기장의 분포 및 송신 전용 필드에 대해서 비교 되었고, 7T에서 이를 평가하고자 송신전용 필드와 더불어 자기장의 분포 역시 비교 평가되었다. 결과: 전자기장 시뮬레이션의 결과와 7T 자기공명영상에서 4 채널 스파이럴 코일은 기존에 사용되는 일반적인 구조인 단일 루프 코일에 비해 상대적으로 우수한 자기장의 분포 및 송신 전용 필드를 보였다. 결론: 7T에서는 코일의 구조에 비해 상대적으로 영상화되는 물질의 특성에 더욱더 의존적이나, 각각의 코일은 다른 필드 분포를 나타냄으로써 최적화된 코일은 악관절 영상과 같은 특정 용도로 사용될 수 있음을 확인하였다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2006년도 제11차 학술대회
• /
• pp.70-70
• /
• 2006

• Imaging Science in Dentistry
• /
• 제34권3호
• /
• pp.123-128
• /
• 2004

Purpose: To evaluate the reliability of measurements in spiral tomography through assessing the visibility of the alveolar crest and the measurements between the alveolar crest and other anatomic structures. Materials and Methods: 110 spiral tomograms of the jaws were taken by Scanora X-ray unit from the patients. The visibility of the alveolar crests was estimated by 3 observers and classified as clearly visible, questionable visibility, or not visible. 3 observers measured the distance between the alveolar crest and the reference points of anatomic structures. The measurements were repeated 2 weeks later. Results: 52.9% of alveolar crests on upper jaws and 61.5% of alveolar crests on lower jaws were visible. The interobserver and intraobserver agreements on the visibility were low. The mean ranges of the measurements were 1.39 mm (SD = 1.37 mm) on maxilla and 1.03 mm (SD = 1.01 mm) on mandible in the interobserver evaluation. The interobserver variance was greater than the intraobserver variance in the measurements of distance. Conclusion: Spiral tomography showed a relatively low reliability in the visibility and measurements of the alveolar crest.

• 천문학회보
• /
• 제44권2호
• /
• pp.70.2-70.2
• /
• 2019

Recent observational works have reported spiral wave patterns (SWPs) in sunspots, but there is a lack of samples to derive the physical properties. In this presentation, we suggest the automatic method to detect the SWPs in observational data and present their statistical properties. From our method, we find more than 1000 SWPs observed by the Atmospheric Imaging Assembly onboard in the Solar Dynamic Observatory from 2013 to 2018. From our samples, more than half of the SWPs has the one spiral arm. The predominant oscillation period is 2 to 3 minutes. The rotating direction of the spiral arms does not depend on the latitude and the polarity of the sunspots. Our statistical results support the physical model suggested by Kang et al. (2019) that explain the generation of SWPs as the depth of the wave driving source and azimuthal modes in the straight vertical magnetic flux tube.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 1999년도 Japanese Journal of Medical Physics
• /
• pp.266-267
• /
• 1999

• 한국의학물리학회지:의학물리
• /
• 제17권3호
• /
• pp.153-158
• /
• 2006

본 연구의 목적은 고해상도 미세영상을 얻을 수 있는 기술을 확보하기 위하여 나선형 multi-turned RF 표면코일(surface coil)의 민감도(sensitivity)를 평가하고자 하였다. RF 코일의 자기장 분포를 시뮬레이션 함으로서 자기장의 불균질성 (inhomogeniety)을 조사하고, 그 결과를 토대로 개선된 RF 코일을 디자인할 수 있다. 1, 3, 5번씩 감은 나선형 코일을 조사 한 결과, 3번 감은 나선형 코일의 민감도가 가장 높은 것으로 나타났다. 이를 통하여 나선형 RF 코일의 감는 횟수를 조절함으로써 코일의 민감도를 향상시킬 수 있다는 것을 확인할 수 있었다. 그리고 지나치게 감는 횟수를 늘리면 오히려 코일의 impedance를 증가시키게 되어 민감도를 감소시키며, 동시에 matching이 어려워진다는 사실을 확인하였다. 본 연구의 결과로서 지름이 4 cm인 나선형 wire RF 표면코일의 최적의 감는 횟수를 발견하였다. 또한 나선형 표면코일에서 감는 횟수의 증가는 항상 민감도에 긍정적인 영향을 미치는 것이 아니며, 반드시 최적의 감는 횟수를 찾아야 한다는 것을 확인하였다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 1996년도 추계학술대회 초록집
• /
• pp.14-14
• /
• 1996

• Journal of Periodontal and Implant Science
• /
• 제48권4호
• /
• pp.202-212
• /
• 2018

Purpose: Bone-to-implant contact (BIC) is difficult to measure on micro-computed tomography (CT) because of artifacts that hinder accurate differentiation of the bone and implant. This study presents an advanced algorithm for measuring BIC in micro-CT acquisitions using a spiral scanning technique, with improved differentiation of bone and implant materials. Methods: Five sandblasted, large-grit, acid-etched implants were used. Three implants were subjected to surface analysis, and 2 were inserted into a New Zealand white rabbit, with each tibia receiving 1 implant. The rabbit was sacrificed after 28 days. The en bloc specimens were subjected to spiral (SkyScan 1275, Bruker) and round (SkyScan 1172, SkyScan 1275) micro-CT scanning to evaluate differences in the images resulting from the different scanning techniques. The partial volume effect (PVE) was optimized as much as possible. BIC was measured with both round and spiral scanning on the SkyScan 1275, and the results were compared. Results: Compared with the round micro-CT scanning, the spiral scanning showed much clearer images. In addition, the PVE was optimized, which allowed accurate BIC measurements to be made. Round scanning on the SkyScan 1275 resulted in higher BIC measurements than spiral scanning on the same machine; however, the higher measurements on round scanning were confirmed to be false, and were found to be the result of artifacts in the void, rather than bone. Conclusions: The results of this study indicate that spiral scanning can reduce metal artifacts, thereby allowing clear differentiation of bone and implant. Moreover, the PVE, which is a factor that inevitably hinders accurate BIC measurements, was optimized through an advanced algorithm.

• Imaging Science in Dentistry
• /
• 제31권3호
• /
• pp.165-173
• /
• 2001

Objectives : To evaluate the absorbed and effective doses of spiral and computed tomography for the dental implant planning. Materials and Methods: For radiographic projection, TLD chips were placed in 22 sites of humanoid phantom to record the exposure to skin and the mean absorbed dose to bone marrow, thyroid, pituitary, parotid and submandibular glands and nesophagus. Effective dose was calculated, using the method suggested by Frederiksen et al.. Patient situations of a single tooth gap in upper and lower midline region, edentulous maxilla and mandible were simulated for spiral tomography. 35 axial slices (maxilla) and 40 axial slices (mandible) with low and standard dose setting were used for computed tomography. All the radiographic procedures were repeated three times. Results: The mean effective dose in case of maxilla was 0.865 mSv, 0.452 mSv, 0.136 mSv and 0.025 mSv, in spiral tomography of complete edentulous maxilla, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). That in case of mandible was 0.614 mSv, 0.448 mSv, 0.137 mSv and 0.036 mSv, in spiral tomography of complete edentulous mandible, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). Conclusions: Based on these results, it can be concluded that low mAs computed tomography is recommended instead of spiral tomography for the complete edentulous maxilla and mandible dental implant treatment planning.