• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.160-160
• /
• 2003

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.118-119
• /
• 2009

As the rapid development of the electronics, the demand for portable electronics and wireless sensors is growing faster, also with the increased needs of one material which can power it automatically, and then power the electrical devices. The piezoelectric effect of the PVDF material can be used for this. So in this paper, PVDF multilayer films were made for this aim. Make the PVDF / DMAc solution in the 10% concentration; use the spin coater technique to make films with the optimum process parameters: the spin rate is 1260rpm; the spin time is 70s; the dry temperature is 100$^{\circ}C$; the dry time is 30mins. And also, for obtaining the higher $\beta$-phase crystallinity, put the Ca(NH3)2.4H2O into the PVDF / DMAc solution system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 1998

Ladder Diagram(LD) is the most extensively used among Programmable Logic Controller(PLC) standard languages for the design of process control system with PLC. But LD has the disadvantages for data processing and maintenance. On the other hand, there is full support for describing sequences so that complete sequential behavior can be easily broken down using a concise graphical language called Sequential Function Chart(SFC). Inspite of those characteristics, SFC is not suitable for describing interlock logic. In this paper, we propose the method for implementing interlock logic by using conventional SFC compiler and verify the effectiveness by applying proposed scheme to the In-Line Spin Coater.Coater.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.103-106
• /
• 2002

The applicability of models based on fractal morphology to characterize $(Ba\;Sr)TiO_{3}$ thin film surfaces was investigated. The fractal morphology of coated barium strontium titan oxide thin film surfaces was described using fractal dimension from scanning electro microscopy image. The $(Ba\;Sr)TiO_{3}$ coating were deposited on silicon wafers using $(Ba\;Sr)TiO_{3}$ solution and spin coater. BST solution was composited by mol ratio, and then spin-coated from 3 times to 5 times coating on $Pt/SiO_{2}/Si$ substrate. Qualitative thin film analysis was performed with scanning electro microscopy (SEM), and surfaces parameters such as average grain diameter, roughness exponent and fractal dimension were determined.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2004

The effect of porous support layer resistance and PDMS (polydimethylsiloxane) coating thickness on ethylene/nitrogen separation of composite membranes was studied with the model of Pinnau and Wijmans〔1〕. To control the support resistance (or permeance), PES porous membranes were prepared by phase inversion process with various PES/NMP dope concentrations. The thickness of selective PDMS top layer was controlled by using a spin coater. Its cross-section and coating thickness were observed by scanning electron microscope (SEM). Pure gas permeation test was done with ethylene and nitrogen, respectively. The experimental result for olefin/nitrogen separation process matched well with theoretical result from the model used. The result shows that optimization between PDMS coating thickness and support resistance is important to get PDMS composite membranes with best performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.234-234
• /
• 2012

고효율 저전력 고휘도를 장점으로 가지고 있는 OLED의 개선을 위하여 수많은 재료와 기술이 연구되어 왔다. 전기적 손실의 방지를 위하여 다양한 재료가 연구되고 있지만 그 중에서도 가장 각광받는 것은 그래핀이다. 그래핀(graphene)은 탄소원자가 육각형 벌집 모양 배열의 격자구조를 가지는 원자 단층 두께의 물질이다. 그래핀은 에너지와 역격자의 k 벡터가 선형적으로 비례하며 전도띠(conduction band)와 가전자띠(valence band)가 한 점에서 만나는 구조를 가지는 특징으로 인해 매우 빠른 전하 이동도(Mobility)를 가지고 있다. 이와 같은 그래핀의 특성을 이용하여 전극 층으로 이용함으로써 소자 특성의 개선이 가능할 것으로 예상되었다. $1{\times}1$ inch Glass에 ITO 대신에 그래핀을 증착한 후 Spin coater를 사용하여 PEDOT을 각각 1,000 rpm, 2,000 rpm으로 도포 하였다. 그 후 HTL (Hole transport latey), ETL (Electron-transport layer), EML (Emissive layer), EIL (Electron injection layer)를 순차적으로 증착 하여 소자를 제작하였다. 발광층에는 유기물질 Alq3를 사용하여 녹색광을 방출하도록 하였다. Spin coater의 rpm에 따라 전도성 고분자의 두께가 결정이 되는데, rpm이 높을수록 두께가 얇으며, 얇을수록 소비전력 효율이 낮다. 하지만 전류밀도 특성이 균일하지 못한 것을 확인하였다. 휘도 효율 특성은 PEDOT의 두께가 얇을수록 동일한 전압에서 휘도가 낮은것을 확인 하였다. 또한 ITO를 이용한 동일 공정의 OLED와 비교하였을 때 상대적으로 낮은 휘도와 전류 효율특성을 보였지만, 전류밀도는 상대적으로 그래핀이 높은 것으로 확인되었다. 본 연구를 바탕으로 그래핀 소자의 개선이 이루어진다면 더욱 높은 효율과 휘도를 낼 수 있을 것으로 판단된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.290-293
• /
• 2012

This article introduces the characterization of spin coated ZnO transparent conducting oxide on the flexible substrates. As a II-IV compound semiconductor, ZnO has a wide band gap of 3.37 eV with transparent properties. Due to this transparent properties, ZnO materials can be also employed as the transparent conducting electrode materials. Therefore, strong demands have been required for the transparent electrodes with low temperature processing and cheap cost. So, We will investigate the electrical property and optical transmittance of ZnO transparent conducting oxide through the 4-point probe resistivity meter, and ultraviolet-vis spectrometer Lamda 35, respectively.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.8 no.1
• /
• pp.1-20
• /
• 1990

$\alpha$,$\beta$,$\varepsilon$ type copper phthalocy $\alpha$,$\beta$,$\varepsilon$ type copper phthalocyanine(CuPc) pigment was purified by a simple train sublimation technique. The layered photoconductor was made with $\varepsilon$ type CuPc as a carrier generation layer(CGL) and polyvinly carvazol(PVCz) as a carrier transport layer(CLT). A CGL of CuPc was electrochemical deposited on an Al substrate used as cathode in pigment dispersion solutions. a CTL of PVCz pwas spin coated on $\varepsilon$ type CuPc thin film by a spin coater. The effect of sonication time, electrophotographic property of the layered photoconductor were studied with surface coverage, surface potential and sensitivity.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.412-417
• /
• 1999

The analytical results obtained by microwave digestion and acid digestion methods for sample pretreatment to determine metal impurities in silicon wafer by inductively coupled plasma-mass spectrometry (ICP-MS) were compared. In order to decompose the silicon wafer, a mixed solution of $HNO_3$ and HF was added to the sample and the metal elements were determined after removing the silicon matrix by evaporating silicon in the form of Si-F. The recovery percentages of Ni,Cr and Fe were found to be 95∼106% for both microwave digestion and acid digestion methods. The recovery percentage of Cu obtained by the acid digestion method was higher than that obtained by the microwave digestion method. For Zn, however, the microwave digestion method gave better result than the acid digestion method. Fe was added to a silicon wafer using a spin coater. The concentration of Fe in this sample was determined by lCP-MS, and the same results were obtained in the two pretreatment methods.