• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.620-626
• /
• 1997

In this study. use if CSA expansive additive for concrete is discussed, particulary applications to partial compacting the concrete structure of spillway gate located in Youngjong new airport construction field. Before the field applications, several basic laboratory test were carried out in order to clarify the material characteristics and to decide mix proportions. As the result the concrete using CSA expansive additive show similar workability and compressive strength to that of OPC concrete. Forethemore, it can be concluded that the use of CSA component is effective to prevent shrinkage crack and to achive volume stabiliy of concrete structure.

• The Journal of Engineering Geology
• /
• v.23 no.1
• /
• pp.67-77
• /
• 2013

We conducted a Tunnel Seismic Prediction (TSP) survey in a spillway tunnel at Juam Dam to predict the locations of major discontinuities ahead of the tunnel face. We compared the results of the TSP survey with those from pre-construction inspections (including a surface resistivity survey and borehole investigations) as well as with direct tunnel-face mapping during excavation. The TSP method predicted the locations of major fracture zones that were unnoticed in the pre-construction inspections. The reinforcement patterns planned on the basis of pre-construction inspections were changed on the basis of the TSP results. The results demonstrate that TSP surveys are a cost-effective and reliably accurate method of predicting the locations of fracture zones. Although the TSP method has some limitations, these results suggest that the method is generally useful for predicting geological conditions prior to tunnel face construction.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.4
• /
• pp.69-75
• /
• 2014

We investigated flood control capacity of 484 agricultural reservoirs with storage capacity of over 1 million $m^3$ in South Korea. In general, agricultural reservoir secures flood control capacity by setting up limited water level during flood season from late June to mid-September. The flood control capacity of an agricultural reservoir during flood season can be divided into stable flood control capacity during non-flood season, stable flood control capacity associated with limited water level, and unstable flood control capacity associated with limited water level. In general, the flood control capacity significantly (P < 0.001) increased with reservoir capacity irrespective of type of spillway. The unstable flood control capacity accounted for about 20 % of reservoir capacity in the uncontrolled reservoirs. The study reservoirs showed flood control capacity of 0.60-65 billion (B) $m^3$ and stable flood control capacity of 0.43-47 B $m^3$, depending on the upper and lower limited water levels during the flood season. The stable flood control capacity of the gated reservoirs (0.29-0.33 B $m^3$) was about two times than that of reservoirs with uncontrolled spillways (0.14 B $m^3$). The ratios of stable flood control capacity to reservoir capacity for agricultural reservoirs range from 21 to 23 %, similar to that for Daecheong multipurpose dam. Moreover, the reservoirs with over 100 mm ratio of flood control capacity to watershed area accounted for 38 % of total gated reservoirs. The results indicate that many agricultural reservoirs may contribute to controlling flood in the small watersheds during the flood season.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2007

Seismic performance evaluation for dam safety evaluation has been continually conducted. However the behavior analysis for the spillway pier which is known as the weak point of dam is seldom reported. Therefore, this study performed the static loading tests for a prototype structures as elementary tests for the final seismic performance evaluation of dam safety. The prototype of pier structure has 1/20 scale and it adopts to strength model. And cracking loads and ultimate loads of real structures are calculated through numerical analysis using commercial FEM program (ABAQUS). The results of this study show some difference between the results of prototype tests and the results of numerical analysis. Also, the ultimate and cracking loads can be estimated through the prototype loading test and numerical analysis.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.426-432
• /
• 2010

A level-set finite-element method is employed to investigate the free surface flow of two conceptual fish passage designs. While one design has a right-angled entrance from the reservoir to the fish passage chute, the other has a curved-shaped entrance. The numerical results are validated with hydraulic experiments through comparison of the free surface location and the pressure distribution in the spillway. It is observed that the right-angled design yields a curved free surface and pressure distribution in the vicinity of the entrance due to large strains, whereas the curved-shaped design yields a smooth flow transition with small strains. The subatmospheirc pressure distributions near the spillway ogee crest for both designs exhibit similar flow patterns. It is concluded that the curved-shaped design is more favorable for fish passage because of the feature of a smooth flow transition with small strains.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.123-133
• /
• 2010

Due to climate change and difficulty in construction of large dam, it is on the increase to use small hydraulic facilities such as washland for the flood control purpose. Since there can be many potential locations for washland in a basin, it is important for determination of optimal location to calculate flood reduction effect of washlands substantially and exactly. In this study, a new scheme to increase flood reduction effect of washlands is suggested. Suggested scheme uses sensitivity analysis of flood reduction effect depending on washland characteristics such as storage volume, spillway elevation and spillway width. The characteristics of the washland is determined by results of sensitivity analysis to maximize flood reduction effect at basin outlet and downstream of a washland. The methodology is applied to Anseong river basin to show its applicability and applied result is compared with those of another studies.

• Water for future
• /
• v.28 no.3
• /
• pp.187-195
• /
• 1995

This study aims at suggesting an alternative to improve current capacity of flood control for the existing Soyanggang multi-purpose dam which was constructed 20 years ago as a largest dam in Korea. The newly estimated value of the probable maximum precipitation(PMP) is 760.0 mm which is based on the hydrometeorological method. The peak inflow of 1000 years return period at the time of construction was 13,500$m^3$/s. However, the newly estimated peak inflow of the PMF is 18,100$m^3$/s which is 1.34 times bigger than the original one. In order to adopt the newly estimated PMF as a design flood, following four alternatives were compared; (1) allocation of more flood control space by lowering the normal high water level, (2) construction of a new spillway in addition to the existing one, (3) raising the existing dam crest, (4) construction of a new dam which has relevant flood control storage at the upstream of the Soyanggang multipurpose dam. The preliminary evaluation of these alternatives resulted in that the second alternative is most economical and feasible. So as to stably cope with the newly estimated PMF by meeting all the current functions of the multi-purpose dam, a detailed study of an additional spillway tunnel has to be followed.

• Water for future
• /
• v.27 no.1
• /
• pp.123-131
• /
• 1994

A plunge pool is often employed as an energy-dissipating device at the end of a spillway or a pipe culvert. A jet from spillways or pipes frequently generates a scour hole which threatens the stability of the hydraulic structure. Existing scour prediction formulas of plunge pool of spillways or pipe culverts give a wide range of scour depths, and it is, therefore, difficult to accurately predict those scour depths. In this study, a new experimental method and new scour prediction formulas under submerged circular jet for large bed materials with shallow tailwater depths were developed. A major variale, which was not used in previous scour prediction equations, was the ratio of jet size to bed material size. In this study, jet momentum acting on a bed particle and jet diffustion theory were employed to derive scour prediction formulas. Four theoretical formulas were suggested for the two regions of jet diffusion, i.e., the region of flow establishment and the region of established flow. The semi-theoretically developed scour prediction formulas showed close agreement with laboratory experiments performed on a movable bed made of large spherical particles.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.869-887
• /
• 2008

Coffer dam for tunnel type spillway in inflow section of Dae-am dam was originally planned as 2 lines sheet piles with Water Zet method. But, the result of pilot test was caused of some problems that vibration during installation of pile could pollute water and water leakage could the lower part. So, sheet piles was not satisfactory for faculty of coffer dam. Structural instability of sheet pile system need to reinforcement. Characteristic of Dae-am dam was small reservoir capacity but wide drainage area, of which it was judgment that security of leakage and stability was difficult during excavation of inlet part. So, we consider that water curtain method utilized with in site pouring concrete pile method was designed at weir part of spillway. We were known about basement rock that geological boring was carried out in weir part. After taking a deep consideration, PRD method was accepted as a new method. Concrete pile by PRD was installed to below country rock. CJM method was carried out with PRD. After making concrete wall using Top-down method, earth anchors were installed for supporting it. According to the result of numerical analysis, as water level rises, wall is stable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.342-342
• /
• 2016

국내 저수지 17,477개소 중 30~40 여년전에 축조된 곳은 16,646개소로 95.2%가 노후화로 인한 지속적인 유지보수가 필요하며, 기후변화에 따른 대응능력이 현저하게 낮다. 하구둑, 방조제, 대형 농업용저수지 같은 대규모 농업기반시설들은 축조 당시보다 설계홍수량이 2~3배 이상 증가함에 따라 기후변화에 대비하기 위해 조속한 치수능력 증대가 필요하다. 하지만 대형 농업용저수지의 치수능력 증대를 위해서는 지형적 입지조건, 시공 가능성, 경제성 등을 고려하여 여수로의 위치, 규모, 형식 변경 등이 수반된다. 따라서 본 연구에서는 무한천 상류 예당저수지의 여수로 위치변경에 따른 저수지 하류 하천 흐름변화에 대하여 2차원 수치모의 연구를 수행하였다. 본 연구에서는 TELEMAC-2D 모형을 적용하여 저수지 하류 하천의 흐름을 모의하였고, RMA-2 모의결과와 비교검토 하였다. TELEMAC-2D 모형은 상류(subcritical flow)와 사류(supercritical flow) 흐름 모의가 가능하며, 홍수범람 뿐만아니라 동일 격자망으로 유한요소법과 유한체적법 모두 수치모의가 가능한 특징이 있다. 본 연구에서는 시간과 공간에 대하여 2차 정확도를 가지는 WAF(Weighted Average Flux) 유한체적기법과 $k-{\varepsilon}$ 난류모형을 적용하였다. 수치모의시 유역종합치수계획의 30년, 50년, 100년 빈도 계획홍수량에 대하여 여수로 위치변경 전(CASE-1)과 위치변경 후(CASE-2) 저수지 하류하천 흐름변화에 대해 모의하였다. 본 연구는 국내 하천 특성을 반영한 기설 저수지의 하류하천의 흐름에 대한 수치모의의 기초자료로 활용되어, 저수지 방류 흐름이 하류하천에 미치는 영향 분석 등에 기여할 것으로 기대된다.