• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.260.2-260.2
• /
• 2002

SPH-2 is a herbal medicine composing oriental prescription. We have studied the antidiabetic effect and mechanism of SPH-2 in insulin-resistant diabetic db/db mice. Mice were grouped and treated for 3 weeks as follows: control group was administrated with tap water orally: treated group was administrated with SPH-2 orally at dose of 500 mg/kg. SPH-2 lowered plasma glucose level by 43% as compared to the diabetic control. Total cholesterol. triglyceride and free fatty acid were all reduced in SPH-2 treated group. (omitted)

• BMB Reports
• /
• v.41 no.2
• /
• pp.119-125
• /
• 2008

Our previous work confirmed that Sph2/LA1029 was a sphigomyelinase-like hemolyisn of Leptospira interrogans serogroup Icterohaemorrhagiae serovar Lai. Characteristics of both hemolytic and cytotoxic activities of Sph2 were reported in this paper. Sph2 was a heat-labile neutral hemolysin and had similar hemolytic behavior as the typical sphingomyelinase C of Staphylococcus aureus upon sheep erythrocytes. The cytotoxic activity of Sph2 was shown in mammalian cells such as BALB/C mouse lymphocytes and macrophages, as well as human L-02 liver cells. Transmission electron microscopic observation showed that the Sph2 treated BALB/C mouse lymphocytes were swollen and ruptured with membrane breakage. They also demonstrated condensed chromatin as a high-density area. Cytoskeleton changes were observed via fluorescence confocal microscope in Sph2 treated BALB/C mouse lymphocytes and macrophages, where both cytokine IL-$1{\beta}$ and IL-6 were induced. In addition, typical apoptotic morphological features were observed in Sph2 treated L-02 cells via transmission electron microscope and the percentage of apoptotic cells did increase after the Sph2 treatment detected by flow cytometry. Therefore, Sph2 was likely an apoptosis-inducing factor of human L-02 liver cells.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.395-402
• /
• 2002

This paper shows how to formulate the transient analysis of 2-dimensional Hagen-Poiseuille flow using smoothed particle hydrodynamics (SPH). Treatments of viscosity, particle approximation and boundary conditions are explained. Numerical tests are calculated to examine effects caused by the number of particles, the number of particles per smoothing length, artificial viscosity and time increments for 2-dimensional Hagen-Poiseuille flow. Artificial viscosity for reducing the numerical instability directly affects the velocity of the flow, though effects of the other parameters do not produce as much effect as artificial viscosity. Numerical solutions using SPH show close agreement with the exact ones for the model flow, but SPH parameter must be chosen carefully Numerical solutions indicate that SPH is also an effective method for the analysis of 2-dimensional Hagen-Poiseuille flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.71-77
• /
• 2011

In this paper elasto-plastic dynamic behavior of solid is analyzed by using smoothed particle hydrodynamics (SPH) without tensile instability which caused by a clustering of SPH particles. In solid body computations, the instability may corrupt physical behavior by numerical fragmentation which, in some cases of elastic or brittle solids, is so severe that the dynamics of the system is completely wrong. The instability removed by using an artificial stress which introduces negligible errors in long-wavelength modes. Applications to several test problems show that the artificial stress works effectively. These problems include the collision of rubber cylinders, fracture and crack of plate.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.263.2-264
• /
• 2002

SPH-l is a herbal medicine composing oriental prescription. We have studied the antidiabetic effect and mechanism of SPH-l in insulin-resistant diabetic db/db mice. Mice were grouped and treated for 3 weeks as follows: control group was administrated with tap water orally: treated group was administrated with SPH-l orally at dose of 500 mg/kg. SPH-l lowered plasma glucose level by 67% as compared to the diabetic control (omitted)

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• Interaction and multiscale mechanics
• /
• v.1 no.2
• /
• pp.251-278
• /
• 2008

In this study, we investigate the discontinuous-derivative treatment at the gas-liquid interface in underwater explosion (UNDEX) problems by using the Moving Least Squares-Smoothed Particle Hydrodynamics (MLS-SPH) method, which is known as one of the particle methods suitable for problems where large deformation and inhomogeneity occur in the whole domain. Because the numerical oscillation of pressure arises from derivative discontinuity in the UNDEX analysis using the standard SPH method, the MLS shape function with Discontinuous-derivative Basis Function (DBF) that is able to represent the derivative discontinuity of field function is utilized in the MLS-SPH formulation in order to suppress the nonphysical pressure oscillation. The effectiveness of the MLS-SPH with DBF is demonstrated in comparison with the standard SPH and conventional MLS-SPH though a shock tube problem and benchmark standard problems of UNDEX of a trinitrotoluene (TNT) charge.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.20 no.1
• /
• pp.1-13
• /
• 2020

Purpose: Gaucher disease (GD), which is the most prevalent lysosomal storage disorder worldwide, is caused by mutations in the glucocerebrosidase gene (GBA). GD is divided into three clinical subtypes based on the appearance of neurological symptoms. Type 1 GD is a chronic non-neuronopathic disease, and types 2 and 3 are acute neuronopathic and chronic neuronopathic forms, respectively. Neuronopathic GD types 2 and 3 are characterized by increased levels of glucosylceramide (GlcCer) and glucosylsphingosine (GlcSph) in the brain, leading to massive loss of neurons. Methods: DNA damage and subsequent apoptosis of H4 cells were observed following neuroglioma H4 cell culture with GlcCer or GlcSph. Neuronal cell apoptosis was more prominent upon treatment with GlcSph. Results: When H4 cells were treated with GlcSph in the presence of tubacin, a histone deacetylase 6 inhibitor (HDAC6i), attenuation of both DNA damage and a reduction in the protein expression levels of GlcSph-induced apoptosis-associated factors were observed. Conclusion: These findings indicated that GlcSph played a prominent role in the pathogenesis of neuronopathic GD by inducing apoptosis, and that HDAC6i could be considered a therapeutic candidate for the treatment of neuronopathic GD.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.163-163
• /
• 2011

평활입자동역학법(SPH, Smoothed Particle Hydrodynamics)은 붕괴파(도수, 댐붕괴류, 쇄파) 등과 같이 수면 변동이 큰 유체 역학 문제를 해결하기 위한 무격자법 중의 하나이다. SPH를 이용한 붕괴파의 모의에서는 압력, 점성, 밀도(압축성), 척력 등 다양한 계산 인자가 필요하다. 이들 인자가 SPH 모의 결과에 미치는 영향을 도수와 댐붕괴류에 대해서 검토하였다. 그 결과 압력과 관련하여, 상태 방정식 계수로 표현되는 유체의 음속은 입자들의 흩어짐 현상과 밀접한 관계를 가지는 것을 밝혀내었다. 평활 거리는 수치해의 안정성과 밀접한 관련이 있으며, 너무 작거나 크게 설정하는 경우 해의 정확도가 떨어지는 것으로 나타났다. 일반적으로 2차원 문제의 경우 20~23개 정도의 입자가 해의 내삽에 사용되는 것이 바람직하다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.796-808
• /
• 2019

In this paper, a Smoothed Particle Hydrodynamics (SPH) method is extended to simulate the ice failure process and ice-ship interactions. The softening elastoplastic model integrating Drucker-Prager yield criterion is embedded into the SPH method to simulate the failure progress of ice. To verify the accuracy of the proposed SPH method, two benchmarks are presented, which include the elastic vibration of a cantilever beam and three-point bending failure of the ice beam. The good agreement between the obtained numerical results and experimental data indicates that the presented SPH method can give the reliable and accurate results for simulating the ice failure progress. On this basis, the extended SPH method is employed to simulate level ice interacting with sloping structure and three-dimensional ice-ship interaction in level ice, and the numerical data is validated through comparing with experimental results of a 1:20 scaled Araon icebreaker model. It is shown the proposed SPH model can satisfactorily predict the ice breaking process and ice breaking resistance on ships in ice-ship interaction.