• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.384-389
• /
• 2008

In this paper, we propose a UML modeling of ATO on-board software. An automatic train operation (ATO) system is a real-time control system, which operates a train without a manual operation by a driver. For the safe and comfortable service, real-time embedded software for ATO on-board equipment should have both of high performance and reliability. UML-based object-oriented modeling technique is introduced and used widely to design software that satisfies this requirement. We used Rhapsody, which is a modeling tool for real-time embedded software, to model the construction and the behavior of ATO on-board equipment. As a result, ATO on-board software which performs the profile calculation and the real-time speed control is designed and implemented. The brief modeling result including behavioral characteristics and the simulation results are presented.

• 한국대기환경학회지
• /
• 제9권2호
• /
• pp.132-139
• /
• 1993

TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.158-159
• /
• 2006

The resistance-capacitance (RC) delay of signals through interconnection materials becomes a big hurdle for high speed operation of semiconductors which contain multilayer interconnection layers. In order to reduce the RC delay, low-k materials will be used for inter-metal dielectric (IMD) materials. We have developed self-consistent simulation tool that includes neutral-species transport model, based on the relaxation continuum (RCT) model. We present the parametric study of the modeling results of a two-frequency capacitively coupled plasma (2f-CCP) with $N_2/H_2$ gas mixture that is known as promising one for organic low-k materials etching. We include the neutral transport model as well as plasma one in the calculation. The plasma and neutrals are calculated self-consistently by iterating the simulation of both species till a spatiotemporal steady state profile could be obtained.

• 한국해안·해양공학회논문집
• /
• 제24권5호
• /
• pp.326-332
• /
• 2012

본 연구에서는 해상풍력발전 후보지인 영광해상에 설치한 해상 기상타워 해모수 1호(HeMOSU-1)의 2011년 연간 풍속 관측 자료와 기상타워 해모수 1호 설치 지점에 인접한 부안, 고창, 영광 3개 지점의 육상 풍속자료를 이용하여 해상 임의고도에서의 풍속 산정 과정에서 발생하는 오차에 대한 분석을 수행하였다. 먼저 육상 풍속자료와 해상 풍속자료의 선형회귀분석으로 유도된 관계식을 이용하여 해상 기준고도(평균해수면 98.69 m)의 해상풍속자료를 추정하였다. 그리고, 추정된 해상풍속 자료는 관측자료를 통해 산출된 고도분포지수 값(${\simeq}0.115$)과 멱법칙 풍속프로파일을 이용하여 87.65 m 높이로 고도보정하여 관측치와 비교하였다. 연구 수행결과, 공간보정오차는 1.6~2.2 m/s 정도이며, 고도보정오차는 0.1 m/s 정도로 공간보정오차의 약 5% 정도에 불과한 것으로 파악되었다. 육상자료를 환산하여 해상임의지점의 풍속을 추정하는 경우, 큰 오차가 발생하기 때문에 장기간의 해상자료를 확보하거나 정확도가 높은 모델링 자료를 이용하여야 할 것으로 판단된다.

• Wind and Structures
• /
• 제34권2호
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.177-180
• /
• 2004

The development of a tilting train with construction of electric line on the conventional railway is required for speed-up on the conventional railway with many curving sections. For development of tilting train, the study and development of the tilting system and tilting bogie having the different mechanism with a general high speed train will play a main role for improving the technology in the field of Korean railway The study and development of the pantograph tilting mechanism in order to keep a good contact behavior between a pantograph and a contact wire by tilting a pantograph on the opposite direction of the vehicle tilting direction. In this study, we analyzed the aerodynamic characteristic of a developing pantograph on the tilting train and obtained the contact force with catenary by aerodynamic lift force by the aerodynamic analysis. We also performed the numerical analysis for design the device controlling lift force on a pantograph. From the aerodynamic simulation and parameter study for a device to control the lift force, we will suggest the various shape and the optimal shape of it corresponding to a developing tilting pantograph. The Fluent software is used for the calculation of flow profile in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2004

The development of a tilting train with construction of electric line on the conventional railway is required for speed-up on the conventional railway with many curving sections. For development of tilting train, the study and development of the tilting system and tilting bogie having the different mechanism with a general high speed train will play a main role for improving the technology in the field of Korean railway. The study and development of the pantograph tilting mechanism in order to keep a good contact behavior between a pantograph and a contact wire by tilting a pantograph on the opposite direction of the vehicle tilting direction. In this study, we analyzed the aerodynamic characteristic of a developing pantograph on the tilting train and obtained the contact force with catenary by aerodynamic lift force by the aerodynamic analysis. We also performed the numerical analysis for design the device controlling lift force on a pantograph. From the aerodynamic simulation and parameter study for a device to control the lift force, we will suggest the various shape and the optimal shape of it corresponding to a developing tilting pantograph. The Fluent software is used for the calculation of flow profile in this study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.132-138
• /
• 2003

The optimal design for a leading car considering the aerodynamic resistance is required on the high-speed train due to increasing of ratio of drag force with proportion for the square of velocity. The aerodynamic analysis using CFD in the stage of concept design offers more economical analysis method which is used to estimate the influence of flow and pressure around the leading car than the experimental method using the Mock-up. In this study, we want to assist the artistic design with aerodynamics analysis in order to get the optimal design for leading car with the operation speed of 180km/h. The results of aerodynamic analysis for two leading car models which one is expressed with lineal beauty and the other is with curvaceous beauty are compared with each other and they offer the proposal of modification for two models in order to decrease the drag force. The shape of curvaceous model is better for the pressure force but slightly worse for the viscous force than the other. The Fluent software is used for the calculation of flow profile in this study.

• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.151-156
• /
• 2021

지구 유체운동의 속력과 방향은 전자기파를 이용한 원격탐사 방법으로 측정된다. UHF 레이더와 GPS 존데를 이용하여 고도별 유체의 속도를 각각 오일러 측정 방법과 라그랑지 측정 방법으로 산출하였다. 대기의 운동 방향인 풍향은 바람이 불어오는 쪽으로 표시하고, 0° - 360°의 순환값을 사용하기 때문에 통계적 분석에 주의가 필요하다. 계산 조건의 설정에 따라 발생하는 오류를 제시하였고, 수정된 비교 결과의 정밀도는 400% 까지 향상하였다.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.125-133
• /
• 2008

차량의 주행속도는 설계일관성을 평가하는 주요한 척도로 활용되며 그 중 곡선반경은 여러 연구에서 공통적으로 제시한 주된 요인으로 나타났다. 이에 본 연구에서는 복합선형에서 설계속도별 적정 평면곡선반경 범위기준을 정립하고 운전자의 인지 행태를 나타낼 수 있는 인지반경을 정립하여 입체선형에서 적합한 평면곡선반경을 제시하고자 한다. 첫째, 본 연구에서는 저속차량의 방해요소를 최소화하기 위하여 입체선형을 고려한 도로의 임의지점에서 횡방향 미끄럼 마찰계수와 주행방향 미끄럼 마찰계수를 동시에 고려하여 설계속도와 종단경사별 평면곡선반경을 제시하였다. 둘째, 본 연구에서는 곡선부 인지반경을 통하여 평면 곡선부와 편평한 종단경사가 조합된 경우, 평면 곡선부와 종단곡선부가 조합된 경우를 비교한 후, 곡선부 인지반경을 산정하여 설계속도별 적정 평면곡선반경과 인지반경 비율을 제시하였다.