• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.431-436
• /
• 2002

The interior sound pressure level of the Korean high-speed train(KHST) is predicted by geometrical acoustic method. For the Purpose of assuring the prediction of Interior noise of KHST by the geometrical acoustic scheme, calculated sound level values of the Korean train express(KTX) by Identical geometrical method are compared with measured values of KTX prototype vehicle by experiment. Contribution of individual sound source of KHST vehicle Into the interior response positions is calculated and sound sources are classified in influential order. Hence, it is reasonable approach to reduce sound power of most contributing noise source first. Sensitivity of the interior response position's sound pressure level (SPL) with respect to train wall sections' transmission loss are carried on and acoustically sensitive spot is identified, for example window area for passenger cabin case. Those contribution and sensitivity analysis results are suggested to design quieter train efficiently.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.187-197
• /
• 2009

해양에서는 파도, 빗방울 등 해수면에 일어나는 많은 물과 물의 충돌, 해양에서 운행되는 선박, 여러 해양 생물들의 생명활동 그리고 여러 발생 원들에 의해 많은 기포들이 생성될 수 있다. 이렇게 생성된 기포들은 해양에서 사용되는 음파의 세기와 음속에 영향을 미치게 된다. 본 연구에서는 2007년 9월 19일 04:00 부터 17:00 까지 남해 남형제도 해역에서 Acoustic Bubble Spectrometer (ABS)와 CTD를 사용하여 해양 기포생성과 생성기포가 음파에 미치는 영향을 관측하였다. 관측자료를 통하여 풍속과 기포생성의 연관성, 기포의 반경에 따른 기포량, 주파수별 음속비를 분석하였다. 최종적으로 분석자료를 통해 기포가 음파전달에 미치는 영향을 모의하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1093-1098
• /
• 2001

The interior sound pressure level of the Korean high speed train is predicted using ray acoustic method. The motor car, motorized car and passenger cabin are investigated under the environment of passing open countryside and inside tunnel Calculated sound levels of KHST are compared with the those of KTX prototype which vehicle shows similar acoustic behavior with KHST for the purpose of assuring the calculated data. In order to reduce the calculated SPL in systematic way, contribution analysis of sound sources and sensitivity analysis of concerning wall's transmission loss on the SPL of the designated receiving points are carried out. Finally, practical design suggestions are proposed.

• 한국음향학회지
• /
• 제42권1호
• /
• pp.16-24
• /
• 2023

해수의 염분은 수중 음속 산출에 있어 영향을 적게 미치는 변수로 알려져 있다. 본 연구는 여름철 양쯔강(장강) 희석수가 동중국해로 확장하는 과정에서 양쯔강 하구 인근 해수의 저염분이 음속의 수직구조에 어떻게 영향을 미치는지를 파악하였다. 음속 산출에 활용된 염분을 관측치와 고정값으로 구분 후 각각의 음속을 비교한 결과, 양쯔강 희석수의 영향으로 염분약층이 수온약층보다 강하게 형성되는 경우 음속이 상이하게 나타났다. 또한, 음원을 수온약층의 중간 심도에 위치하여 음선경로를 추적한 결과 염분약층이 강한 경우 고정된 염분으로 계산된 음속에서는 확인되지 않는 수중음파통로가 나타났다. 이러한 결과를 바탕으로 본 연구는 여름철 저염분수에 의한 강한 염분약층이 형성된 조건에서 음속 산출 시 Expandable Bathy Thermograph(XBT)보다는 실제 염분이 고려된 관측기기인 Expendable Conductivity Temperature Depth(XCTD)와 Expendable Sound Velocimeter(XSV)의 활용이 중요함을 제시한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.135-138
• /
• 2005

On the basis of theoretical studies on the effect of the cylinders attached to semi-infinite screens, the effect of the tangential sound power-transport along the cylindrical top section of noise barriers is studied. Four types of acoustical mechanism between the surface of the cylinder and the adjacent air particles are investigated, namely Z $\rightarrow$ $\infty$, Z $\rightarrow$ pc, Z $\rightarrow$ 0 and actively controlled surface sound field. In active control case the sound power parallel to the surface of the attached cylinder is minimized by means of a secondary sound field, which is generated from a part of the attached cylinder. In each case the change in the acoustical shadow zone was shown and compared. The numerical study shows the possibility of deflecting the incident sound by minimizing the acoustical surface impedance of the upper sections.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.680-690
• /
• 2020

In ocean environment, the sound speed gradient of seawater has an important influence on far field sound propagation. The FEM/BEM is used to decouple the vibroacoustic radiation of the spherical shell, and the Green function of the virtual source chain is adopted for decoupling. For far field radiated Sound Pressure Level (SPL), the Beam Displacement Ray normal Mode (BDRM) is employed. The vibration and near-/far-field radiated SPL of spherical shell is analyzed in shallow sea uniform layer, negative/positive gradient, negative thermocline environment, and deep-sea sound channel. Results show that the vibroacoustic radiation of spherical shell acted at 300Hz can be analogous to dipole. When the radiated field of the spherical shell is dominated by large-grazing-angle waves, it can be analogous to vertically distributed dipole, and the far field radiated SPL is lower; while similar to horizontally distributed dipole if dominated by small-grazing-angle waves, and the far field SPL is high.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.184-190
• /
• 2006

최근에 Lee 등은 1차원 수평배열 센서만을 사용하여 다중경로를 통해 들어오는 신호로부터 표적의 3차원 위치를 추정하였다. 그러나 이 기법에서 음속은 수심에 상관없이 일정하다고 가정하였기 때문에 음속이 수심에 따라 다양하게 변화하는 실제 해양환경에서는 그 추정 성능이 현저하게 저하된다. 따라서 본 논문에서는 비균일 음속 환경에 적합한 근거리 표적의 3차원 위치추정 기법을 제안한다. 제안한 기법에서는 선형의 음속구조를 가지는 근거리 다중경로 환경에서 음파전달 모델을 기반으로 한 위치추정함수를 구성하였으며 이로부터 표적의 방위각, 거리 및 깊이를 3차원 탐색을 통하여 추정하였다. 선형 음속구조 및 실제 환경과 유사한 비선형 음속구조를 적용하여 제안한 기법의 성능을 기존의 기법과 비교, 분석하였으며 기존의 기법에 비해 거리 추정 오차는 최대 100m, 깊이 추정 오차는 50m정도 감소됨을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.326-331
• /
• 2011

Aluminum extruded panel used in a high speed train shows high stiffness, however, its sound insulation performance is remarkably decreased by local resonance phenomena. In this paper, improvement strategy of the sound insulation performance is proposed for the floor extruded panel used in HEMU-400x, 400km/h class next generation high speed train under development, and the improvement effect is verified by experiment. Aluminum extruded panel specimen for the floor is manufactured and urethane foam is installed in the core of the panel. Based on ASTM E2249-02, intensity transmission loss is measured and the improvement effect in local resonance frequency band is verified. Finally, improvement effect of the sound insulation performance is estimated on the layered floor structure including the foamed aluminum panel.

• 소음진동
• /
• 제11권3호
• /
• pp.471-476
• /
• 2001

This paper focuses on the numerical prediction of airflow-induced sound in DVD drives. As a first step, computational fluid dynamics (CFD) is conducted to evaluate flow field characteristics due to the high-speed disk rotation, and to support the acoustic analysis. Acoustic analogy based on Ffowcs Wi1liams-Hawkings (FW-H) equation is adopted to predict aeroacoustic noise patterns. The integral solution for quadrupole volume source is included to identify the turbulence noise generated inside the DVD tray. The strength of sound pressure revel with respect to rotating speed is discussed to meet upfront demand on the high fidelity product development. The present study also focuses on the noise directivity and examines how much the sound noise is sensitive to change in rotating speed. Near-field noise is strongly affected by the flow field characteristic, which is caused by the complex shape of the tray. For a mid-field, the quadrupole noise play as a counterpart of thickness noise or loading noise, so it generates different sound noise Patterns compared with those in the near field.