• 제목/요약/키워드: Speed Difference

검색결과 2,559건 처리시간 0.026초

원판증발기를 가진 회전형 히트파이프에서 액막두께가 전열에 미치는 영향 (The Effect of Film Thicknesses on Heat Transfer in a Rotating Heat Pipe with the Disc Evaporator)

  • 권순석;장영석;유병욱
    • 대한기계학회논문집
    • /
    • 제18권6호
    • /
    • pp.1572-1581
    • /
    • 1994
  • Heat transfer characteristics in a rotating heat pipe with evaporator of the rotating disc and the condenser of the screwed groove is investigated by numerical method for various dimensionless film thicknesses, Re, C_{p}{\Delta}T/h_{fg}$, rotational speed and working fluids. The temperature difference between evaporator wall and vapor increases a little, but the temperature difference between condenser wall and vapor decreases rapidly as Re increases. As the dimensionless film thickness decreases, the temperature difference of evaporator and condenser decreases. As the rotational speed increases, the temperature difference between evaporator wall and vapor increases but the temperature difference between condenser wall and vapor decreases. The Nusselt number can be shown as a function of dimensionless film thickness and Re, that is $Nu=0.963\cdot(\delta^{-1}(\omega/\vpsilon)^{-1/2}{\cdot}Re^{0.5025})$.

측풍영향을 고려한 고속전철 주위의 비압축성 점성 유동 해석 (Incompressible Viscous Flow Analysis around a High-Speed Train Including Cross-Wind Effects)

  • 정영래;박원규;김홍원;하성도
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1995년도 추계 학술대회논문집
    • /
    • pp.55-63
    • /
    • 1995
  • The flow field around a high-speed train including cross-wind effects has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations in the inertial frame using the iterative time marching scheme. The governing equations are differenced with 1st-order accurate backward difference scheme for the time derivatives, 3th-order accurate QUICK scheme for the convective terms and 2nd-order accurate central difference scheme for the viscous terms. The Marker-and-Cell concept was applied to efficiently solve continuity equation, which is differenced with 2nd-order accurate central difference scheme. The 4th-order artificial damping is added to the continuity equation for numerical stability. A C-H type of elliptic grid system is generated around a high-speed train including ground. The Baldwin-Lomax turbulent model was implemented to simulate the turbulent flows. To validate the present procedure, the flow around a high speed train at constant yaw angle of $45^{\circ}\;and\;90^{\circ}$ has been simulated. The simulation shows 3-D vortex generation in the lee corner. The flow separation is also observed around the rear of the train. It has concluded that the results of present study properly agree with physical flow phenomena.

  • PDF

SUV 차량의 전면 구조 형상에 따른 충돌 속도와 보행자 전도 거리의 상관관계에 관한 연구 (A Study on the Relationship between Impact Speed and Throw Distance of Pedestrian by the difference of the frontal shape of SUV vehicles)

  • 강대민;안승모
    • 한국기계가공학회지
    • /
    • 제6권3호
    • /
    • pp.105-111
    • /
    • 2007
  • The type of pedestrian accident can be characterized by vehicular frontal shape and the height of pedestrian. The trajectory of pedestrian after collision by passenger car is different from that by bus due to vehicular frontal shape. The frontal shape of SUV vehicles is dissimilar to passenger car and bus. So, the trajectory and throw distance of pedestrian by SUV vehicles is not the same of passenger car and bus. In this paper, a series of pedestrian kinetic simulation were conducted to inspect the difference in throw distance between SUV vehicle and passenger car and bus by PC-CRASH that is the program for kinetic analysis of articulated body. From the results, if the height of pedestrian is taller than 1.70m, there is no difference in throw distance between SUV vehicle and passenger car, but if the height of pedestrian is about 1.55m throw distance of SUV vehicle is about 4m longer than that of passenger car at each impact speed. The throw distance of pedestrian by Bus is shorter than that of passenger car and SUV at each impact speed.

  • PDF

고유수용성 신경근 촉진법의 통합 패턴이 정적 균형에 미치는 영향 (The Effects of the Combined Patterns of Proprioceptive Neuromuscular Facilitation on Static Balance)

  • 최원제;김윤환;이승엽
    • PNF and Movement
    • /
    • 제6권1호
    • /
    • pp.1-12
    • /
    • 2008
  • Purpose : The purpose of this study was to investigate the effects of the combined patterns of PNF(proprioceptive neuromuscular facilitation) on the static balance ability. Methods : The measurements of the static balance ability were completed by 10 subjects for 6 weeks, from October to November 2007. The combined patterns of PNF were carried out by means of self-exercising suggested by Dietz, which were designed as four cases: two positions (standing and quadruped) for both patterns(sprinter and skater), respectively. The exercises were practiced once a day, 3 times a week in same condition. By using the GOOD BALANCE system, assessment of the static balance ability was taken at before and after exercise from 6 positions: normal standing, one leg left and one leg right standing when eye open and close, respectively. For each case, the experimental data was obtained in 3 items: mean X speed, mean Y speed and velocity moment. Results : The results of this study were as follows : 1. There were statistically significant differences of Mean X speed, Mean Y speed and Velocity moment between the before and the after exercise in the case of normal standing when eye open and close(NSEO and NSEC), respectively. 2. There was statistically significant difference of Mean X speed between the before and the after exercise in the case of one leg left standing when eye open(OLLEO). In this case, however, the statistically significant differences were not found in both terms of Mean Y speed and Velocity moment. 3. There were statistically significant differences of Mean X speed and Mean Y speed between the before and the after exercise in the case of one leg left standing when eye close(OLLEC). In this case, however, the statistically significant difference was not found in term of Velocity moment. 4. There were statistically significant differences of Mean X speed, Mean Y speed and Velocity moment between the before and the after exercise in the case of one leg right standing when eye close(OLREC). 5. There was statistically significant difference of Mean X speed between the before and the after exercise in the case of one leg right standing when eye open(OLREO). In this case, however, the statistically significant differences were not found in both terms of Mean Y speed and Velocity moment. 6. There were statistically significant differences of total Mean X speed, total Mean Y speed and total Velocity moment between the before and the after exercise. Conclusions : The above results from this study indicated that the combined patterns of PNF have improved the static balance ability. However the used self-exercise can be applied to normal people, i.e., the exercise is difficult to apply into clinical patients. The further study should be focused at development of various modified forms of the combined patterns of PNF in keeping up the improvement effect of this exercise.

  • PDF

원통형 압전 변환기에 의한 관 내 축대칭 파동 속도 측정 (Measurement of Axisymmetric-Wave Speed in a Pipe by Using Piezoelectric Cylindrical Transducers)

  • Hwang, Kyo-Kwang;Kim, Jin-Oh
    • The Journal of the Acoustical Society of Korea
    • /
    • 제23권1E호
    • /
    • pp.19-23
    • /
    • 2004
  • This paper presents an experimental technique to generate and detect axisymmetric longitudinal waves in a pipe by using piezoelectric cylindrical transducers. Radial pulses transmitted by one transducer have propagated in two opposite directions along the pipe, and other two transducers have received the propagating waves. The difference of the transit times measured for the waves in two paths of known distance difference has yielded the phase speed of the wave propagation. Wave speed has been measured in an empty pipe and in a water-filled pipe.

봉제속도에 따른 봉합강도에 관한 연구 (A Study on Seam Strength according to Sewing Speed)

  • 김정진;장정대
    • 한국의류학회지
    • /
    • 제23권7호
    • /
    • pp.998-1006
    • /
    • 1999
  • This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

  • PDF

브러시리스 직류 전동기의 센서리스 구동시 부하 변동에 따른 회전자 위치 오차 분석과 아날로그 필터의 설계 (Analysis on the Analog Filter Design and the Effect of Load for BLDCM Sensorless Drive)

  • 김영일;김종선;장재훈;유지윤;김동식
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.660-664
    • /
    • 2004
  • The indirect rotor position detection method using terminal voltage of brushless DC motor (BLDCM) requires simple control circuit, and has wide speed range of sensorless operation. However, because the substantial phase difference exists between real back emf and terminal voltage, the existing indirect detection method using analog filter which is affected by frequency, speed, and load sensitively cannot be synchronized with current, in the end, it advances or delays. This paper presents new analog filter circuit design for rotor position estimation in order to solve the problem, and proposes novel sensorless operation method which is stable even in high speed range and not influenced by parameters with analysis on phase difference by load and speed. Moreover, the appropriateness of the proposed sensorless drive in this paper is verified and analyzed by experimentation.

  • PDF

증감지와 필름에 따른 방사선상 변화에 대한 연구 (THE COMPARATIVE EVALUATION OF FILM-SCREEN COMBINATIONS)

  • 최경자;최승규
    • 치과방사선
    • /
    • 제18권1호
    • /
    • pp.213-225
    • /
    • 1988
  • This study was to compare the quality of image by different screen and film combinations. Using the sensitometer measured the speed and average gradient of blue sensitive films and orthochromatic films. The films was combined with rare earth screen LR, LM, LF and conventional screen OM, OH, XOR, OKa and exposed the step wedge to impulse 2, 3, 4, 6, 10, 15, 24,3 8, 60 and measured the density. The following results were obtained: 1. The density of film and film-screen combinations showed significant difference, then in film-screen combinations was significantly different by the screens than films. 2. The speed of blue sensitive films was little different, the TMG of orthochromatic films produced high speed, and the AX film was high average gradient. 3. The relative speed of film-screen combinations showed significant difference, and was high in the OKa of the conventional screens and in the LR of the rare earth screens, especially that of LR screen in the combination with blue sensitive films was high. 4. The average gradient of film-screen combinations showed no significant difference, and was high in the OKa screen and LR/OG combination, and that of OKa/AX combination was highest. 5. The latitude of film-screen combinations showed significant difference by screens, and was high in the LM screen in combination with blue sensitive films and in the OM screen in combination with orthochromatic films. 6. The subject contrast of film-screen combinations showed significant difference by screen, and was high in the LR screen in combination with blue sensitive AX film and orthochromatic TMG film.

  • PDF

상지 패턴을 결합한 어깨 복합체 안정화 운동이 초등학교 야구선수들의 제구력과 구속에 미치는 영향 (The Effects of a Shoulder Complex Stabilization Exercise Combined with Upper Extremity Patterns on Ball Control and Ball Speed in Elementary School Baseball Players)

  • 정연우;이소영;서태화
    • PNF and Movement
    • /
    • 제18권3호
    • /
    • pp.343-350
    • /
    • 2020
  • Purpose: The purpose of this study was to determine how a shoulder complex stabilization exercise affects ball control and ball speed in elementary school baseball players with an instable scapula. Methods: The subjects of the study were 16 baseball players attending S elementary school in Kwangju Metropolitan City. A shoulder complex stabilization exercise was conducted three times per week for one hour for four weeks. Then, the participants were divided into a scapular instability group or stability group based on their lateral scapular slide test scores. The measurement tool was measured using the target, the ball speed tester (PR1000-BC). All inspections were measured before and after the mediation period to examine the change in the subjects according to the mediation period. Results: As a result of measuring ball control, there was a statistically significant difference in the variation over time (p < 0.05), and there was no statistically significant difference in the interaction between time and group (p > 0.05). As a result of the test of effectiveness between subjects, there was no statistically significant difference found among the groups (p > 0.05). In terms of ball speed, there was no statistically significant difference found in the variation over time (p > 0.05) as well as in the interaction between time and group (p > 0.05). In terms of the effectiveness between subjects, there was no statistically significant difference found among the groups (p > 0.05). Conclusion: It was found that the shoulder complex stabilization exercise could improve ball control for elementary school baseball players. It is believed that this will help prevent and solve possible sport damages experienced during training or competitions, thereby helping athletes use training methods to improve their exercise capacity and continue their careers.

포지션별 정구 플랫서비스의 운동학적분석 (Kinematic Analysis of Service Movement In Each Position of Soft Tennis)

  • 김헌수
    • 한국운동역학회지
    • /
    • 제12권1호
    • /
    • pp.221-231
    • /
    • 2002
  • The purpose of this study was to clarify the differences in service patterns of a forward and backward soft tennis players using 3D motion analyzer. Subjects were 4 forward players of $24.0\pm5.23$yrs and 4 backward players of $23.5\pm1.73$yrs. The results were as following: 1. There was no difference among each positions on swinging-time. The longest racket swinging-time was in the phase of takeback, the second one was in follow-through. The shortest one was in the phase of forward-swing so called force production phase, which had an influence on ball's velocity. 2. The racket speed on impact was 16.3m/s in forward subject and 19.53m/s in backward subject, when each velocity of balls was 44.6m/s, 52.9m/s. Although there was no significant difference along by positions, backward subject showed faster result. 3. The maximum speed of each performance was reached before the impact, and the speed at impact along by positions did not show any significant difference. The summation of velocity was measured in good order as following; hip, shoulder, elbow, wrist, top of racket. 4. In the angular velocity of all examine except one, the angular velocity of forearm was bigger than the one of racket top although there was no statistically significant difference between forward and backward subject. 5. The service grip of the forward players was shorter than that of backward players.