• Macromolecular Research
• /
• 제12권1호
• /
• pp.134-140
• /
• 2004

Semi-crystalline poly(ethylene terephthalate) (PET) film surfaces were modified with argon and oxygen plasmas by radio-frequency (RF) glow discharge at 240 mTorr/40 W; the changes in topography and surface structure were investigated by atomic force microscopy (AFM) in conjunction with specular reflectance of infrared microspectroscopy (IMS). Under our operating conditions, analysis of the AFM images revealed that longer plasma treatment results in significant ablation on the film surface with increasing roughness, regardless of the kind of plasma used. The basic topographies, however, were different depending upon the kind of gas used. The specular reflectance analysis showed that the ablative mechanisms of the argon and oxygen plasma treatments are entirely different with one another. For the Ar-plasma-treated PET surface, no observable difference in the chemical structure was observed before and after plasma treatment. On the other hand, the oxygen-plasma-treated PET surface displays a significant decrease in the number of aliphatic C-H groups. We conclude that a constant removal of material from the PET surface occurs when using the Ar-plasma, whereas preferential etching of aliphatic C-H groups, with respect to, e.g. , carbonyl and ether groups, occurs upon oxygen plasma.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.1-6
• /
• 2014

The specular hologram is one type of hologram, and it consists of many arcs. They are very easy to fabricate and can even be machined by hand and a compass. In this study, we designed two squares having different depths and consisting of many arcs, after which we machined the arcs using end-mill technology. The width of the machined arcs showed high repeatability. Moving tracks were observed on the bottom surface, and top burrs were noted. In spite of them, the phenomenon of the specular hologram was observed when an observer and a light source stood on the same side. The two squares seemed to have different depths when they were observed from the left and right directions. In this study, it was verified that a specular hologram can be manufactured by end-mill technology.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.349-354
• /
• 2004

The growth mode of the Si layers which were grown on Si(111) by using Ag as surfactant were investigated by intensity oscillations of the RHEED specular spot at the different temperatures. we found that the introduction of Ag as the surfactant alters the growth mode from a three-dimensional clustering mechanism to a two-dimensional layer-by-layer growth. In the growth of Si layers on Si(111) with a surfactant Ag, At $450^{\circ}C$, RHEED intensity oscillation was very stable and periodic from early stage of deposition to 32 ML. RHEED patterns during homoepitaxial growth at $450^{\circ}C$ was changed from $7{\times}7$ structure into ${\sqrt{3}}{\times}{\sqrt{3}}$ structures. Since the ${\sqrt{3}}{\times}{\sqrt{3}}$ structure include no stacking fault, the stacking fault layer seems to be reconstructed into normal stacking one at transition from the $7{\times}7$ structure to a ${\sqrt{3}}{\times}{\sqrt{3}}$ one. We also found that the number of the intensity oscillation of the specular spot for Si growth with a surfactant Ag was more than for Si growth without a surfactant. This result may be explained that the activation energy decrease for the surface diffusion of Si atoms due to segregation of the surfactant toward the growing surface.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1998년도 Proceedings of International Workshop on Advanced Image Technology
• /
• pp.41-44
• /
• 1998

In this paper, a new method of obtaining specular surface shape by using five degrees of freedom camera system is described. The normal vectors of the surface are extracted by achieving the coincident between the camera axis and the surface normal vector. This method uses a five degrees of freedom (5DOF) camera to fulfill this task. From the normal vector data, the shape of the surface is reconstructed. The result shows that the methodology improves the 3-D shape of object measurement with good accuracy.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.9-20
• /
• 2000

An analysis of heat and mass transfer has been carried out for multi-wafer Low Pressure Chemical Vapor Deposition (LPCVD). Surface radiation analysis considering specular radiation among wafers, heaters, quartz tube and side plates of the reactor has been done to determine temperature distributions of 150 wafers in two dimensions. Velocity, temperature and concentration fields of chemical gases flowing in a reactor with multi-wafers have been then determined, which determines Si deposition growth rate and uniformity on wafers using two different surface reaction models. The calculation results of temperatures and Si deposition have been compared and found to be in a reasonable agreement with the previous experiments.

• 한국광학회지
• /
• 제27권1호
• /
• pp.41-46
• /
• 2016

본 논문은 경면체의 3차원 형상을 측정하기 위한 광학시스템에 관한 것으로, 특히 LED 배열로 이루어진 점광원과 하프미러, 이미지센서로 구성된 비전시스템을 구성하여 광로분석을 수행하고 효과적인 근사화 방법을 제시한다. 실험을 통하여 취득된 영상 내의 점광원의 상대적 위치변화로부터 경면체의 3차원형상의 효과적 추정이 가능함을 보인다.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.347-353
• /
• 2008

Reflected light can be decomposed into specular and diffuse components according to the light reflectance theory and experiments. The specular component appears in smooth surfaces mainly, while the diffuse one is visible in rough surfaces mostly. Therefore, each component can be used in forming their correlations to a surface roughness. However, they cannot represent the whole surface roughness seamlessly, because each formulation is merely validated in their available surface roughness regions. To solve this problem, new approaches to properly blend two light components in all regions are proposed in this paper. First is the weighting function method that a blending zone and rate can be flexibly adjusted, and second is the neural network method based on the learning from the measurement data. Simulations based on the light reflectance theory were conducted to examine its performance, and then experiments conducted to prove the enhancement of the measurement accuracy and reliability through the whole surface roughness regions.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.403-408
• /
• 1999

In this paper, ultrasonic tomography by the Mode-Converted Rayleigh wave (MCRW) in the back-scattered direction is presented. When a beam with a short pulse and narrow beam width enters a reflector with smooth surface, in general, two major arrivals can be observed in the output waveform: the specular reflection and the radiation of the MCRW from the reflector surface. The time-delay between the two waves is relatively large and thus can be measured easily. This large time-delay is due to the fact that the MCRW is slower than incident wave. In our method, this large time- delay is used for ultrasonic image reconstruction. To effectively detect the MCRW, the arrayed-receiving transducers are circularly arranged around the transmitter. In addition, a deconvolution method is employed to remove specular echo signals for reconstructing the MCRW image.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.390-394
• /
• 2004

This is the study on dry sliding wear behavior of unidirectional carbon fiber reinforced epoxy matrix composite at ambient temperature. The wear rates and friction coefficients against the stainless steel counterpart specularly processed were experimentally determined and the resulting wear mechanisms were microscopically observed. Three principal sliding directions relative to the dominant fiber orientation in the composite were selected. Wren sliding took place against smooth and hard counterpart, the highest wear resistance and the lowest friction coefficient were observed in the antiparallel direction. When the velocity between the composite and the counterpart went up, the wear rate increased. The fiber destruction and cracking caused fiber bending on the contact surface, which was discovered to be dominant wear mechanism.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2944-2953
• /
• 1994

Active range finders using laser beam have been widely used for the factory automation and quality assurance, but they may be unreliable if the object' slope is steep or its surface is specular. The reliability of an active range finder was analyzed for the variation of the reflected laser beam intensity. First, the properties of the object's reflection were modeled by using the bidirectional reflectance-distribution function(BRDF), and then the variation of the laser beam brightness was formulated for the different configuratioin of the object and sensor. The experimental data of the laser beam reflection were obtained for two materials, mild steel and stainless steel. The parameters of the proposed model were obtained by fitting the data of the mild steel to the model and it was found that the results calculated from the proposed model were in good agreement with the experimental data.