• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.537-546
• /
• 2017

This study aims to develop the floating debris detection algorithm using a Unmanned Aerial Vehicle (UAV) and multispectral sensors. In addition, the occurrence range of floating debris was estimated by applying the algorithm. An aerial photograph using an unmanned aerial vehicle was used to generate an orthoimage that can calculate the area. A spectrum survey of water, plants litter, polystyrene foam etc. was conducted. After obtaining spectroscopic characteristics of floating debris and water, the River Floating Debris (RFD) index was calculated. And we detected the floating debris through band combination of sensor using RFD. As a result of the RFD application, accumulation zone of floating debris was confirmed at three sites in the orthoimage. It was estimated that a lot of floating debris was accumulated at 0.82 ha ($8,200m^2$), which is corresponding to 3.6% including the accumulation zone.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.513-518
• /
• 1996

This report presents a demonstration of application of realistic evaluation methodology to a posturated cold leg large break LOCA in a Westinghouse three-loop pressurized water reactor with 17$\times$17 fuel. The new method of this analysis can be divided into three distinct step: 1) Best Estimate Code Validation and Uncertainty Quantification 2) Realistic LOCA Calculation 3) Limiting Value LOCA Calculation and Uncertainty Combination RELAP5/MOD3/K ［1］, which was improved from RELAP5/MOD3.1, and CONTEMPT4/MOD5 code were used as a best estimate thermal-hydraulic model for realistic LOCA calculation. The code uncertainties which will be determined in step 1) were quantified already in previous study ［2］, and thus the step 2) and 3) for plant application were presented in this paper. The application uncertainty parameters are divided into two categories, i.e. plant system parameters and fuel statistical parameters. Single parameter sensitivity calculations were performed to select system parameters which would be set at their limiting value in Limiting Value Approach (LVA) calculation. Single run of LVA calculation generated 27 PCT data according to the various combinations of fuel parameters and these data provided input to response surface generation. The probability distribution function was generated from Monte Carlo sampling of a response surface and the upper 95$^{th}$ percentile PCT was determined. Break spectrum analysis was also made to determine the critical break size. The results show that sufficient LOCA margin can be obtained for the demonstration NPP.

• Korean Journal of Biological Psychiatry
• /
• v.4 no.2
• /
• pp.272-278
• /
• 1997

Many investigators are trying to elucidate the pathogenesis of psychiatric disorders on the basis of neuroendocrine responses to stimulation or perturbation. Dexamethasone(DEX) suppression has been the most widely utilized as the prototypical challenge test. Dexamethasone suppression test(DST) has proven to be valuable in diagnosing the depressive spectrum disorder. Reported specificity of diagnosis of depression is relatively high, but sensitivity is limited. Some researchers used the combination of dexamethasone and corticotropin releasing hormone(CRH) in order to improve the sensitivity. They reported that combined DEX/CRH test is more sensitive than DST alone. In this study the authors modified the DEX/CRH test, i.e., we administered the insulin instead of CRH. Total subjects were 28(7 normal controls, 10 manic patients, 11 schizophrenic patients). Subjects were taken DEX(1.5mg p.o.) at 11 p.m., insulin 16 hours later(0.1 unit/kg i.v.). Five blood samples for the determination of cortisol and ACTH were serially drawn at 15 minute interval. The results are as followings : 1) The cortisol and ACTH levels of manic subjects increased following insulin administration. Manic subjects showed higher levels of cortisol and ACTH than schizophrenic and normal control subjects. The cortisol and ACTH levels of schizophrenic and normal control subjects did not show gross changes. 2) The sensitivity of the test was lower than that of reported DEX/CRH test.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.17 no.1
• /
• pp.37-40
• /
• 2014

Purpose: Crigler-Najjar syndrome type II (CN-2) is characterized by moderate non-hemolytic unconjugated hyperbilirubinemia as a result of severe deficiency of bilirubin uridine diphosphate-glucuronosyltransferase (UGT1A1). The study investigated the mutation spectrum of UGT1A1 gene in Korean children with CN-2. Methods: Five Korean CN-2 patients from five unrelated families and 50 healthy controls were enrolled. All five exons and flanking introns of the UGT1A1 gene were amplified by polymerase chain reaction (PCR) and the PCR products were directly sequenced. Results: All children initially presented with neonatal jaundice and had persistent indirect hyperbilirubinemia. Homozygous p.Y486D was identified in all five patients. Three patients had an associated homozygous p.G71R and two a heterozygous p.G71R. The allele frequency of p.Y486D and p.G71R in healthy controls was 0 and 0.16, respectively. No significant difference in mean serum bilirubin levels was found between homozygous carriers of p.G71R and heterozygous carriers. Conclusion: The combination of homozygous p.Y486D and homozygous or heterozygous p.G71R is identified. The p.Y486D and p.G71R can be screened for the mutation analysis of UGT1A1 in Korean CN-2 patients.

• Development and Reproduction
• /
• v.14 no.4
• /
• pp.215-223
• /
• 2010

The construction of transgenic mouse using embryonic stem (ES) cells has been crucial in the functional studies of gene on mouse genome. Gene knockout mice have been powerful for elucidating the function of genes as well as a research model for human diseases. Gene targeting and gene trapping mathods have been the representative technologies for making the knockout mice by using ES cells. Since the gene targeting and the gene trapping methods were independently developed about 20 years ago, it's efficiency and productivity has been improved with a advance of molecular biology. Conventional gene targeting method has been changes to high throughput conditional gene targeting. The combination of the advantage of gene targeting and gene tapping elements allows to extend a spectrum of gene trapping and to improve the efficiency of gene targeting. These advance should be able to produce the mutant with various phenotype to target a certain gene, and in postgenome era they have served as crucial research tools in understanding the functional study of whole genome in mouse.

• Earthquakes and Structures
• /
• v.6 no.1
• /
• pp.71-87
• /
• 2014

Interaction between closely-spaced buildings subject to earthquake induced strong ground motions, termed in the literature as "seismic pounding", occurs commonly during major seismic events in contemporary congested urban environments. Seismic pounding is not taken into account by current codes of practice and is rarely considered in practice at the design stage of new buildings constructed "in contact" with existing ones. Thus far, limited research work has been devoted to quantify the influence of slab-to-slab pounding on the inelastic seismic demands at critical locations of structural members in adjacent structures that are not aligned in series. In this respect, this paper considers a typical case study of a "new" reinforced concrete (R/C) EC8-compliant, torsionally sensitive, 7-story corner building constructed within a block, in bi-lateral contact with two existing R/C 5-story structures with same height floors. A non-linear local plasticity numerical model is developed and a series of non-linear time-history analyses is undertaken considering the corner building "in isolation" from the existing ones (no-pounding case), and in combination with the existing ones (pounding case). Numerical results are reported in terms of averages of ratios of peak inelastic rotation demands at all structural elements (beams, columns, shear walls) at each storey. It is shown that seismic pounding reduces on average the inelastic demands of the structural members at the lower floors of the 7-story building. However, the discrepancy in structural response of the entire block due to torsion-induced, bi-directionally seismic pounding is substantial as a result of the complex nonlinear dynamics of the coupled building block system.

• Korean Journal of Veterinary Service
• /
• v.32 no.3
• /
• pp.241-249
• /
• 2009

Shiga toxin (Stx)-producing Escherichia coli (STEC) strains can cause broad spectrum of human disease, including diarrhea, hemorrhagic colitis, and the life-threatening hemolytic uremic colitis (HUS). We examined 868 samples was taken from bovine feces and carcass from January to December 2008 in Seoul. Twenty two (9.5%) shiga toxin -producing Escherichia coli were isolated from the 230 of bovine feces, and two (0.31%) were isolated from the 638 of carcasses. Serotype of E. coli isolates were O157 (10, 41.6%), O26 (10, 41.6%), O111 (1, 4.2%) and UT (3, 12.6%). In PCR, the isolates displayed three different stx gene combination (stx1 [2, 8.4%]), stx2 [3, 12.6%] and stx1 and stx2 [19,87.5%]). The eaeA and hlyA gene were found in 11 (45.8%) of the 24 strains. Saa gene was present only one strains (4.2%). Toxin typing using reverse passive latex agglutination test showed the same result in VT 1. But it showed different result in VT 2. In antimicrobial susceptibility test, all isolates were sensitive to amikacin, amoxicillin/clavulanic acid, ciprofloxacin and colistin. Eighteen strains (75.0%) of 24 isolates showed the multi-resistant patterns with over 3 drugs. PFGE was performed after the genomic DNA of twenty four isolates was digested with Xba I. the 24 isolates showed 7 (A~G) PFGE type.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.634-640
• /
• 2005

The reaction of cis-[Cr([14]-decane)(OH$_2)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = citrate(cit)} leads to a new dimeric complex cis-[{Cr([14]-decane)($\mu$-cit)}$_2](ClO_4)_2$. This binuclear complex has been structurally characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. Analysis of the crystal structure of cis-[{Cr([14]-decane)($\mu$-cit)})($_2]^+$ reveals that each chromium has a distorted octahedral coordination environment and citrato ligands are monodentate to the two chromium atoms via the carboxyl groups. For dimeric complex the bridging geometry is as follows: Cr$\ldots$Cr = 7.361 $\AA$; Cr-O(average) = 1.958 (8) $\AA$; Cr-N range = 2.108 (9)-2.147(9) $\AA$; N(1)-Cr-N(3) (equatorial position) = 98.0(4)$^{\circ}$; N(2)-Cr-N(4) (axial position) = 166.4(4)$^{\circ}$; O(1)-Cr-N(2) = 98.1(4)$^{\circ}$; O(3)-Cr-N(4) = 96.6(3)$^{\circ}$; O(1)-Cr-O(3) = 90.4$^{\circ}$. The FAB mass spectrum of the dimeric complex displays peak due to the molecular ions cis-[{Cr([14]-decane)($\mu$-cit)})($_2]^+$ at m/z 1053.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• Carbon letters
• /
• v.28
• /
• pp.38-46
• /
• 2018

Modified pitch A (MPA) and modified pitch B (MPB) were prepared by oxidative polymerization and thermal polycondensation reaction with refined pitch as the raw material, respectively. The toluene soluble components (TS-1 and TS-2) were obtained by solvent extraction from MPA and MPB, separately. The Flynn-Wall-Ozawa method and Kissinger-Akahira-Sunose method were used to calculate the pyrolysis activation energy of TS. The Satava-Sestak method was used to investigate the pyrolysis kinetic parameters of TS. Moreover, the optical microstructure of the thermal conversion products (TS-1-P and TS-2-P) by calcination shows that TS-1-P has more contents of mosaic structure and lower contents of fine fiber structure than TS-2-P. The research result obtained by a combination of X-ray diffraction and the curve-fitting method revealed that the ratios of ordered carbon crystallite (Ig) in TS-1-P and TS-2-P were 0.3793 and 0.4417, respectively. The distributions of carbon crystallite on TS-1-P and TS-2-P were calculated by Raman spectrum and curve-fitting analysis. They show that the thermal conversion product of TS-2 has a better graphite crystallite structure than TS-1.