• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.26-32
• /
• 2011

In this study, a standard illuminant A type LED that has similar emission spectrum as the standard illuminant A was developed using LED chip(emission peak: 405[nm]) and four types of phosphors(blue, green orangered and red). Using the design of experiment for spectrum control, the trend of the change of spectrum shape influenced by the change of interaction among phosphors and their density could be examined. Computer simulation through the optimization of the design of experiment revealed that, among four phosphors, the most influential one on the shape of the spectrum was green phosphor. Using the obtained optimal combination ratio of the four phosphors, an alternative LED illuminant to the actual standard illuminant A was developed and the spectrums of these two were confirmed identical. Using this standard illuminant A type LED, a portable transmittance meter with the range of measurement error of ${\pm}1.0$[%] was developed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.605-608
• /
• 2009

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sending purpose. However, The conventional spectrum estimation method, FFT(Fast Fourier Transform), called the Doppler filter bank, causes the frequency resolution problem if the dwell time is relatively short. This short acquisition time also spreads the side lobe levels of return echoes further, resulting in difficulties for the discrimination of weak target signals included in relatively strong target echoes. Therefore, in this paper, the efficient Doppler spectrum estimation methods are compared and investigated through the parameter spectrum estimation in the time domain to overcome these problems.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.1
• /
• pp.33-42
• /
• 2021

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1241-1254
• /
• 2015

Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

• Phonetics and Speech Sciences
• /
• v.8 no.2
• /
• pp.65-71
• /
• 2016

The purpose of this study is to examine the prosodic pattern of the children with high functioning autism spectrum disorder(HFASD) according to sentence type. The participants were 18 children aged from 7 - 9 years; 9 children with HFASD and 9 typical development children(TD) of the same chronological age with HFASD children. Sentence reading tasks were conducted in this study. Seven interrogative sentences and 7 declarative sentences were presented to the participants and were asked to read the sentences three times. Mean values of F0, F0 range, intensity, speech rate and pitch contour were measured for each sentence. The results showed that for F0 range, significant main effect and interaction effect were observed in the subject group and sentence type. There were significant differences in intensity, mean F0, speech rate, pitch contour across sentence types. The results of this study indicated that HFASD showed no difference in intonation across sentence types. Speakers' intention may have a negative effect on pragmatic aspects. These results suggest that the assessment and intervention of prosody be important for HFASD.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.637-642
• /
• 2016

In this study, we prepared and characterized a acrylate based UV-curable plastic scintillator. It was used co-polymers TMPTA, DHPA and Ultima $Gold^{TM}$ LLT organic scintillator. The emission spectrum of the plastic scintillator was located in the range of 380~520 nm, peaking at 423 nm. And the scintillator is more than 50% transparent in the range of 400~800 nm. The emission spectrum is well match to the quantum efficiency of photo-multiplier tube and the fast decay time of the scintillation is 12 ns, approximately. This scintillation material provides the possibility of combining 3D printing technology, and then the applications of the plastic scintillator may be expected in human dosimetry etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.175-182
• /
• 2000

(A hybrid-type wireless infrared data communication module was fabricated by using the light emitting andabsorption diodes with the one-chip of integrated digital circuits. The light emitting diode with the peak spectrum of 850 nm was made from compound semiconductor material of AIGaAs and shows high speed signal transmission with the delay time of 60 nsec for the light direction angle of 30". The Si PIN photodiode showsthe good absorption rate for the range of wavelength of 450-1050 nm and convex-type epoxy lens was utilized for the spectrum filtering on the visible-range spectrum below 750 nm, The data transmission speed is 115.2 kbps and the fabricated module satisfies on the IrDA 1.0 SIR standard requirements.)ments.)

• Electrical & Electronic Materials
• /
• v.1 no.1
• /
• pp.54-61
• /
• 1988

This paper was a study on dielectric phenomena of the specimen, Polypropylene films which were annealled in air and quenched in liquid nitrogen after aging for 5[hr] in water of 100[.deg.C]. The specimen was measured in temperature range of 15-120[.deg.C] and in frequency range of 30-1x 10$^{6}$ [HZ]. As the results of the study, it was confirmed that the tacticity of specimen was isotactic structure, and the degree of cryatallinity of the specimens calculated by means of Natta's method from XRD (X-ray Diffraction) spectrum was 55[%]. And for dielectric relaxation, .betha. peak-the tan .delta. (spectrum around 20[.deg.C])-attributed due to amorphous regions, and .alpha. peak - the tan .delta. spectrum around 90[.deg.C]-due to crystalline regions. It was identified that the degree of crystallinity of the specimen quenched in the liquid nitrogen was increased to 55-65[%], and that of the specimen annealled in the air was decreased to 55-50[%]. And activation energy from dielectric loss spectra was obtained 34.5[kcal/mole] for .alpha. peak and 80.5[kcal/mole] for .betha. peak, respectively.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2011

The spectrum sensing is one of the fundamental functions to realize the cognitive radios. One of problems in the spectrum sensing is that the performance of spectrum sensing can be degraded due to fading and shadowing. In order to overcome the problem, cooperative spectrum sensing method is proposed, which uses a distributed detection model and can increase sensing performance. However, the performance of cooperative spectrum sensing can be still affected by the interference factors such as obstacle and malicious user. Especially, most of cooperative spectrum sensing methods only considered the stationary primary user. In the ubiquitous environment, however the mobile primary users should be considered. In order to overcome the aforementioned problem, in this paper we propose a robust spectrum detection method based on localization where we estimate the location of the mobile primary user, and then based on the location and transmission range of primary user we detect interference users if there are, and then the local sensing reporting from detected interference users are excluded in the decision fusion process. Through simulation, it is shown that the sensing performance of the proposed scheme is more accurate than that of conventional other schemes

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.27-32
• /
• 2000

Microearthquake records with magnitude 2.6~3.1 recorded in the southeastern part of the Korean peninsula during 1994~1998 are analyzed. Total of 42 records consisted of 12 events instrumented at 7 stations. The response spectra with the above data shows that the frequency range of the dominant response is about 10~25Hz and are compared with the standard response spectrum. The result implies that the characteristics of the microearthquake ground motion differ from those of standard response spectrum presented in US NRC Reg. Guide 1.60 especially at higher frequencies.