• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1108-1113
• /
• 2000

A condition monitoring methodology for rotating machinery is proposed based on multivariate statistical analysis. The CMS usually are using the vibration signal amplitude such as acceleration RMS, peak and velocity RMS to detect machine faults but the information is not so enough that CMS cannot perform reliable monitoring. So new parameters are added such as shape factor, crest factor, kurtosis and skewness as time domain parameters and spectrum amplitude of rotating frequency, $2^{nd}$ harmonics and gear mesh frequency etc. as frequency domain parameters. Many parameters are combined to represent the machine state using the Hotelling's $T^2$ statistics. The proposed methodology is tested in laboratory and the on-line experiment has shown that the proposed methodology offers a reliable monitoring for rotating machinery.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.950-955
• /
• 2003

This paper introduces an enhanced condition monitoring and diagnosis system recently developed for rotating machinery. In the system, the data aquisition/monitoring signal processing, machine condition classifier, case-based reasoning and demonstration modules are effectively integrated with user-friendliness so that machine operators can easily monitor and diagnose the status of rotating machinery in operation. Some of the new features include the directional spectrum, case-based reasoning and neural network techniques. And the demonstrator modules for fault diagnosis of a Bear driving system and for basic understanding of the rotor dynamics are provided to help the potential users better understand the system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.395-400
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established. Bearing diagnosis system is composed of four parts as follows : sensing part for ultrasonic sensor and preamplifier, signal processing part for measuring frequency spectrum, energy and amplitude, interface part for connecting ultrasonic signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

• Structural Monitoring and Maintenance
• /
• 제5권3호
• /
• pp.345-361
• /
• 2018

The set of processes performed to determine the dynamic characteristics of the constructed structures is named experimental modal analysis. Using experimental modal analysis and interpreting its results, structural failure can be assessed and then it would be possible to plan for their repair and maintenance. The purpose of the experimental modal analysis is to determine the resonance frequencies, mode shapes and Mode damping for the structure. Diverse methods for determining the shape of the mode by various researchers have been presented. There are pros and cons for each of these methods. This paper presents a method for determining the mode shape of the structures using the response spectrum in the experimental modal analysis. In the first part, the principles of the proposed method are described. Then, to check the accuracy of the results obtained from the proposed method, single and multiple degrees of freedom models were numerically and experimentally investigated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.25-28
• /
• 2005

The optical fiber is known for the proper sensor which can accomplish the structural health monitoring, Fiber Bragg Grating sensors are being studied more than any other fiber optic sensors due to good multiplexing capabilities. But because the signal stability of FBG sensors can be influenced by the strain gradient, it needs to analyze signal of FBG sensors. Particularly acoording to strain gradient induced by structural geometry or cracks, the spectrum peak of the FBG sensor signal can be split easily. In this paper, the spectrum analysis of the FBG sensor signal was performed and the region of embedment of FBG sensors was determined in $H_2$ pressure vessel by numerical method.

• Wind and Structures
• /
• 제25권2호
• /
• pp.195-214
• /
• 2017

Full-scale wind characteristics based on the field measurements is an essential element in structural wind engineering. Statistical analysis of the wind characteristics at Sutong Cable-stayed Bridge (SCB) site is conducted in this study with the recorded long-term wind data from structural health monitoring system (SHMS) between 2008 and 2015. Both the mean and turbulent wind characteristics and power spectra are comprehensively investigated and compared with those in the current codes of practice, such as the measured wind rose diagram, monthly maximum mean wind speed, turbulence intensity, integral length scale. Measurement results based on the monitoring data show that winds surrounding the SCB site are substantially influenced by the southeast monsoon in summer and strong northern wind in winter. The measured turbulence intensity is slightly higher than the recommended values in specifications, while the measured ratio of lateral to longitudinal turbulence intensity is slightly lower. An approximately linear relationship between the measured turbulence intensities and gust factors is obtained. The mean value of the turbulence integral length scale is smaller than that of typical typhoon events. In addition, it is found that the Kaimal spectrum is suitable to be adopted as the power spectrum for longitudinal wind component at the SCB site. This contribution would provide important wind characteristic references for the wind performance evaluation of SCB and other civil infrastructures in adjacent regions.

• 대한원격탐사학회지
• /
• 제27권4호
• /
• pp.403-410
• /
• 2011

연안 환경에 대한 효과적인 관측을 위해서는 높은 주기 및 공간 해상도의 지속적인 관측이 필요하다. 지상에 설치한 기기로부터 이루어지는 원격 관측은 소수의 현장 기기 개수로는 관측할 수 없는 넓은 범위의 해역을 통시에 관측할 수 있고 또한 높은 빈도의 지속적인 관측이 가능하다. 본 연구에서는 연안 환경에 대한 대표적인 지상 원격 관측 기기인 마린 레이다와 카메라 시스템의 활용에 대하여 고찰해본다. 마린 레이다는 시간적으로 연속된 레이다 영상으로부터 파수 스펙트럼을 계산하고 이를 통합 적분하고 조정 전달함수를 적용하여 시간에 따른 주파수 스펙트럼을 산출할 수 있다. 또한 시간에 따른 파랑 레이다 영상을 평균함으로서 쇄파대와 이안류 그리고 연안사주의 위치 등에 대한 분석도 기능하다. 카메라 시스템은 해안선의 변화뿐만 아니라 오염 등으로 인하여 해안에서 발생하는 거품 발생량의 변화에 대한 분석을 할 수 있다. 빗각 촬영된 거품 영상을 기하 보정 후 거품부분을 따로 추출함으로서 거품량에 대한 정량적인 분석이 가능하다. 위의 두 기기는 각기 그 특성이 다른 센서로서 이를 동시에 활용하면 연안환경 관측에 있어 시너지 효과를 얻을 수 있다.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.121-125
• /
• 2010

회전기기의 결함진단에 있어서 기존의 방법과 달리 적외선열화상기술은 회전기기의 결함진단에 대해 비접촉, 비파괴 및 상태감시 모니터링을 할 수 있다. 본 논문에서는 적외선열화상 상태진단을 기반으로 하는 회전기기의 결함진단에 대한 새로운 접근법을 제안한다. 따라서 회전기에서 가장 많이 사용되어지는 볼베어링을 이용하여 실험을 수행하였고, 진동 스펙트럼 분석과 적외선열화상을 이용하여 실시간 모니터링을 수행하였다. 적외선열화상기법을 이용하여 볼베어링의 윤활 불균형에 따른 온도 특성을 확인할 수 있었다. 이러한 실험을 통한 결과를 분석 검토하여 향후 산업전반의 회전기기의 상태감시연구에 있어서 다양한 분야에 사용되어 질 것으로 예상된다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.178-180
• /
• 2002

In this Paper, we conducted a experimental study to measure a particle size distribution and mass spectrum with the special instrument such as ISPM and Q-MS. Also, we set up a total measuring system for monitoring the particle in the process chamber.