• 한국지구과학회지
• /
• 제22권1호
• /
• pp.65-74
• /
• 2001

선관측에 기초한 DOAS와 같은 광투과 분석방식의 계측능과 기상인자와의 관계를 평가하기 위해, 서울시의 반포지역을 중심으로 약 14개월(1999. 6${\sim}$2000. 8) 동안 확보된 3대 기준성 오염물질(SO$_2$, NO$_2$, O$_3$)과 주변 환경변수와의 관계를 여러 가지 통계적 방식으로 분석하였다. 본 연구 결과에 의하면, DOAS의 계측능은 오염물질간 또는 기상인자간에서도 비교적 뚜렷한 경향성을 갖는 것이 확인되었다. 그리고 이러한 경향성은 계절과 같은 시간적 요인에 따라복잡하게 변화할 수 있는 것으로 나타났다. 특히 SO$_2$나 NO$_2$,와 같은 항목의 경우, 여러 가지 요인의 차이에도 불구하고 계측능이 일정한 수준을 유지할 수 있는 것으로 나타났다. 반면 O$_3$의 경우, 기상조건의 변화에 상대적으로 민감한 변화를 보였다. 기상인자들간의 관계를 비교한 결과, 풍향, 풍속, 일사량과 같은 요인들이 성능에 민감한 영향력을 행사할 가능성이 큰 것으로 나타났다. 마지막으로 두 기기간의 농도차이를 조절하는 요인들을 상관분석을 통해 비교한 결과, 풍속, 일사량, 기온 등의 요인이 증가할수록 계측기간의 농도차가 줄어들었다. 반대로 오염물질의 농도가 증가하는 방향으로 흐를 경우, 계측기간의 오차는 상대적으로 증폭되는 방향으로 변화하였다. 따라서 DOAS로부터 계측된 자료를 해석하기 위해서는 기상인자를 포함하는 주변 환경인자의 변화에 대한 해석을 동시에 수행하는 것이 중요할 것으로 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제9권2호
• /
• pp.77-84
• /
• 1998

$H_2O/O_2$, $D_2O/H_2O$, $D_2O/H_$2 등의 반응계의 수소동위원소 교환반응용 전기방전을 이용하여 용이하게 일으킬 수 있다. 예를 들어, DC 코로나 방전을 위의 반응혼합물을 통하여 일으키면 여기된 상태의 반응물이 존재하는 플라즈마를 형성하게 된다. 이러한 플라즈마 내에서 반응물들은 양자에너지 준위의 여기, 이온화 그리고 라디칼 형성등을 통하여 매우 큰 반응성을 갖게되므로 실온에서도 용이하게 수소동위원소 교환반응을 일으킨다. 본 연구에서는 $H_2/D_2O$계의 기상에서의 교환반응에 대한 연구를 실시하였다. 위 반응계는 전기방전하에서 수소(H)와 중수소(D)간의 교환반응에 의하여 HDO와 HD를 생성하게 된다. 이러한 반응생성물을 FTIR 분광법을 이용하여 시간의 함수로 측정을 하였다.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.245-265
• /
• 1991

The purpose of this study was to observe the changes of the elemental transmission and bond strength between the metal and porcelain according to various kinds of ion beam mixing method. ion beam mixing of $meta1/SiO_2$ (silica), $meta1/Al_2O_3$(alumina) interfaces causes reactions when the $Ar^+$ was implanted into bilayer thin films using a 100KeV accelerator which was designed and constructed for this study. A vacuum evaporator used in the $10^{-5}-10^{-6}$ Torr vacuum states for the evaporation. For this study, three kinds of porcelain metal selected, -precious, semiprecious, and non-precious. Silica and alumina were deposited to the metal by the vacuum evaporator, separately. One group was treated by two kinds of dose of the ion beam mixing $(1\times10^{16}ions/cm^2,\;5\times10^{15}ions/cm^2)$, and the other group was not mixed, and analyzed the effects of ion beam mixing. The analyses of bond strength, elemental transmissions were performed by the electron spectroscopy of chemical analysis (ESCA), light and scanning electron microscope, scratch test, and micro Vickers hardness tests. The finding led to the following conclusions. 1. In the scanning electron and light microscopic views, ion beam mixed specimens showed the ion beam mixed indentation. 2. In the micro Vickers hardness and scratch tests, ion beam mixed specimens showed higher strength than that of non mixed specimens, however, nonprecious metal showed a little change in the bond strength between mixed and non mixed specimens. 3. In the scratch test, ion beam mixed specimens showed higher shear strength than that of non treated specimens at the precious and semiprecious groups. 4. In the ESCA analysis, Au-O and Au-Si compounds were formed and transmission of the Au peak was found ion beam mixed $SiO_2/Au$ specimen, simultaneously, in the higher and lower bonded areas, and ion beam mixed $SiO_2/Ni-Cr$ specimen, oxygen, that was transmitted from $SiO_2\;to\;SiO_2/Ni-Cr$ interface combined with 12% of Ni at the interface.

• Journal of Periodontal and Implant Science
• /
• 제27권2호
• /
• pp.329-346
• /
• 1997

Dental implants have been developed for enhancement of osseointegration. Biocompatibility, bone affinity and surface characteristics of dental implants are very important factors for osseointegration. The aim of the present study was to determine the cytotoxicity and the bone affinity of titanium phosphide(Ti-P) implant material. The Ti-P surface was obtained by vacuum sintering of titanium within compacted hydroxyapatite powder. The composition and the chemical change of the surface were determined by Auger electron spectroscopy. The in vitro cytotoxicity was evaluated by the viability of the bone cells and macrophages obtained from chicken embryo and rat,s peritonium, respectively. For the comparative evaluation, 316L stainless steel, commercially pure titanium and Ti-P materials, prepared in size of 1O.0mm in diameter and 5.0mm in height, were immersed separately in bone cells and macrophages for 10 days. For the evaluation of the in vivo bone affinity, 316L stainless steel, commercially pure titanium and Ti-P materials, prepared in size of 5.0mm in diameter and 10.0mm in length, were implanted after drilling in diameter 5.5mm in femurs of 2 dogs weighing 10Kg more or less. Six weeks after implantation the specimens were prepared for histopathological examination and were observed under light microscope. In comparison of in vitro bone cell viability, Ti-P and commercially pure titanium groups were not significantly different from control group (p>O.1), but 316L stainless steel group was significantly lower than control group(p<0.05). There was no statistical difference in the viability of macrophages between 3 different groups and control group(p>O.l). In comparison of in vivo study, 316L stainless steel and commercially pure titanium showed fibrous encapsulation, but Ti-P showed remarkable new bone formation without any fibrous tissue. The results demonstrate that Ti-P has favorable biocompatibility and bone affinity, and suggest that dental implants with Ti-P surface may enhance osseointegration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권4호
• /
• pp.515-523
• /
• 2012

The objective of this study was to investigate the variability in broiler performance, apparent metabolisable energy (AME) and ileal digestible energy (IDE) between five different maize samples fed with and without xylanase at 16,000 U/kg. Various in vitro characterisations were conducted to determine if any could predict performance or AME. Samples of the maize were harvested in five diverse regions and fed individually in a mash diet as follows (g/kg): test maize 608.3; soya bean meal (SBM) 324.1; poultry fat 25.2; salt 4.6; met 2.6; lys 1.6; thr 0.5; limestone 9.7, dical 18.4; vit/min 5.0; CP 210 and ME (kcal/kg) 3,085. The diets were fed to 720 broilers with 6 replicates, each containing 12 birds per treatment, from 0 to 18 d of age. Maize samples were analysed for starch, protein, crude fibre, fat, protein solubility index (PSI) and vitreousness using near infra red reflectance spectroscopy (NIR). They were also assayed using an in vitro starch digestibility method. The results showed that there was no effect of harvest region on the feed intake (FI), body weight gain (BWG) or feed conversion ratio (FCR) of the broilers over the 18 d period (p = 0.959, 0.926, 0.819 respectively). There was an improvement in all parameters with the addition of xylanase (FI p = 0.011; BWG and FCR p<0.001). There was a significant positive effect of xylanase on IDE, AME, IDE Intake (IDEI) and AME intake (AMEI) (p<0.0001 in all cases). Although there was no significant effect of maize source, there was a strong trend towards variability in IDE (p = 0.066) and AME (p = 0.058). There were no significant correlations (p<0.05) between any proximate or physiochemical values and any performance or AME values. This may suggest that none of those selected were suitable predictors for performance or AME. The broilers performed well according to the breed guidelines, with slightly increased FI, increased BWG and similar FCR prior to the addition of xylanase. When FCR and BWG were analysed with FI as a covariate, xylanase addition remained significant suggesting that the improvement in BWG and FCR was driven by an increase in digestibility and nutrient availability.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권5호
• /
• pp.716-722
• /
• 2013

The aim of the present study was to determine the influence of age of animal, hot carcass weight, pH, conformation and fat class on basic beef quality attributes (tenderness, sarcomere length, basic chemical composition, marbling and colour) in a group of purebred animals. The object of the study was beef of Limousin bulls (25 to 27 months, hot carcass weight - $432{\pm}31$ kg, "U" conformation class, "2"-"3" fat class). Analysed cuts were Infraspinatus muscle from the blade and Longissimus dorsi muscle from the cube roll and the striploin. Tenderness was analysed with universal testing machine, colour - chromometer analysis, sarcomere length - microscopic method, basic chemical composition - near-infrared spectroscopy and marbling - computer image analysis. No differences in tenderness and sarcomere length were observed within the age groups of Limousin bulls (age of 25, 26, 27 months) (p>0.05). Moisture (p = 0.0123) and fat (p = 0.0250) content were significantly different for meat of animals slaughtered at the age of 25 and 27 months. No influence of pH value on tenderness was observed, but at the same time, influence on sarcomere length (p = 0.039) and $b^*$ component of colour (0.045) was found. For "U" conformation class, in subclasses, as well as for fat classes "2"-"3", there were no differences in tenderness, sarcomere length and colour components. Higher fat content was observed in the higher fat class, rather than in lower, however this feature was not associated with marbling.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권11호
• /
• pp.1530-1540
• /
• 2016

This study was conducted to estimate the genetic parameters of ${\beta}$-hydroxybutyrate (BHBA) and acetone concentration in milk by Fourier transform infrared spectroscopy along with test-day milk production traits including fat %, protein % and milk yield based on monthly samples of milk obtained as part of a routine milk recording program in Korea. Additionally, the feasibility of using such data in the official dairy cattle breeding system for selection of cows with low susceptibility of ketosis was evaluated. A total of 57,190 monthly test-day records for parities 1, 2, and 3 of 7,895 cows with pedigree information were collected from April 2012 to August 2014 from herds enrolled in the Korea Animal Improvement Association. Multi-trait random regression models were separately applied to estimate genetic parameters of test-day records for each parity. The model included fixed herd test-day effects, calving age and season effects, and random regressions for additive genetic and permanent environmental effects. Abundance of variation of acetone may provide a more sensitive indication of ketosis than many zero observations in concentration of milk BHBA. Heritabilities of milk BHBA levels ranged from 0.04 to 0.17 with a mean of 0.09 for the interval between 4 and 305 days in milk during three lactations. The average heritabilities for milk acetone concentration were 0.29, 0.29, and 0.22 for parities 1, 2, and 3, respectively. There was no clear genetic association of the concentration of two ketone bodies with three test-day milk production traits, even if some correlations among breeding values of the test-day records in this study were observed. These results suggest that genetic selection for low susceptibility of ketosis in early lactation is possible. Further, it is desirable for the breeding scheme of dairy cattle to include the records of milk acetone rather than the records of milk BHBA.

• BMB Reports
• /
• 제31권6호
• /
• pp.595-599
• /
• 1998

To investigate conformational information of a low oxygen affinity recombinant hemoglobin (rHb) containing $96Val{\rightarrow}Trp$ mutation at the ${\alpha}96$ position, we ave produced rHb (${\alpha}96Val{\rightarrow}Phe$) and rHb (${\alpha}96Val{\rightarrow}Tyr$), using the Escherichia coli expression system and site-directed mutagenesis. The oxygen affinity of rHb (${\alpha}96Val{\rightarrow}Phe$) is similar to that of human normal adult hemoglobin (Hb A). However, the oxygen affinity of rHb (${\alpha}96Val{\rightarrow}Tyr$) showed much lower oxygen affinity than Hb A which is similar to that of rHb (${\alpha}96Val{\rightarrow}Tyr$), providing an opportunity as a potential candidate for a hemoglobin-based blood substitute. Both rHb (${\alpha}96Val{\rightarrow}Phe$) and rHb (${\alpha}96Val{\rightarrow}Tyr)$ showed high cooperativity in oxygen binding. IH-NMR spectroscopy shows that both rHb (${\alpha}96Val{\rightarrow}Phe$) and rHb (${\alpha}96Val{\rightarrow}Tyr$) have very similar tertiary structure around the heme pockets and uaternary structure in the ${\alpha}_1/{\beta}_2$ subunit interface ompared to Hb A. The low oxygen affinity of rHb (${\alpha}96Val{\rightarrow}Tyr$) has been suggested to be due to a hydrogen bond caused by an extra hydroxyl group not present in rHb (${\alpha}96Val{\rightarrow}Phe$). However, investigation of the carbonmonoxy form of rHb (${\alpha}96Val{\rightarrow}Phe$) and (${\alpha}96Val{\rightarrow}Try$) in the presence of inositol hexaphosphate at low temperature suggests that low oxygen affinity of (${\alpha}96Val{\rightarrow}Try$) may arise from a mechanism different to that of rHb (${\alpha}96Val{\rightarrow}Trp$).

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.103-105
• /
• 2003

After fifteen years of development, Magnetic Resonance (MR) technology for human imaging and spectroscopy is reaching a refined state with FDA approved 3T clinical products from Siemens, GE, and Philips. Broker has cleared CE approval with a 4T system. Varian supports a 4T system platform as well. Shielded magnets are standard at 3T from GE, Oxford, Magnex, and IGC. A shielded 4T whole body magnet is available from Oxford. Stronger switched gradients and dynamic shim coils, desired at any field, areespecially useful at higher static magnetic fields B0. In addition to the higher currents required for higher resolution slice or volume selection afforded by higher SNR, whole body gradient coils will be driven at increasing slew rates to meet the needs of new cardiac applications and other requirements. For example 3T and 4T systems are now being equipped with 2kV, 500A gradient coils and amplifiers capable of generating 4G/cm in 200msec, over a 67+/-cm bore diameter. High field EPI applications require oscillation rates at 1 kHz and higher. To achieve a benchmark 0.2 ppm shim over a 30cm sphere in a high field magnet, at least four stages of shimming need to be considered. 1) A good high field magnet will be built to a homogeneity spec. falling in the range of 100 to 150 ppm over this 30cm spherical "sweet spot" 2) Most modern high field magnets will also have superconducting shim coils capable of finding 1.5 ppm by their adjustment during system installation. 3) Passive ferro-magnetic shimming combined with 4) active, high order room temperature shim coils (as many as five orders are now being recommended) will accomplish 0.2 ppm over the 30cm sphere, and 0.1 ppm over a human brain in even the highest field magnets for human studies. Safety concerns for strong, fast gradients at any B0 field include acoustic noise and peripheral nerve stimulation. One or more of the mechanical decoupling methods may lead to quieter gradients. Patient positioning relative to asymmetric or short gradient coils may limit peripheral nerve stimulation at higher slew rates. Gradient designs combining a short coil for local speed and strength with a longer coil for coverage are being developed for 3T systems. Local gradients give another approach to maximizing performance over a limited region while keeping within the physiologically imposed dB0/dt performance limits.

• Investigative Magnetic Resonance Imaging
• /
• 제21권1호
• /
• pp.1-8
• /
• 2017

Purpose: To investigate the exchange and redistribution of hyperpolarized $^{13}C$ metabolites between different pools by temporally analyzing the relative fraction of dual $T_2{^*}$ components of hyperpolarized $^{13}C$ metabolites. Materials and Methods: A dual exponential decay analysis of $T_2{^*}$ is performed for [1-$^{13}C$] pyruvate and [1-$^{13}C$] lactate using nonspatially resolved dynamic $^{13}C$ MR spectroscopy from mice brains with tumors (n = 3) and without (n = 4) tumors. The values of shorter and longer $T_2{^*}$ components are explored when fitted from averaged spectrum and temporal variations of their fractions. Results: The $T_2{^*}$ values were not significantly different between the tumor and control groups, but the fraction of longer $T_2{^*}$ [1-$^{13}C$] lactate components was more than 10% in the tumor group over that of the controls (P < 0.1). The fraction of shorter $T_2{^*}$ components of [1-$^{13}C$] pyruvate showed an increasing tendency while that of the [1-$^{13}C$] lactate was decreasing over time. The slopes of the changing fraction were steeper for the tumor group than the controls, especially for lactate (P < 0.01). In both pyruvate and lactate, the fraction of the shorter $T_2{^*}$ component was always greater than the longer $T_2{^*}$ component over time. Conclusion: The exchange and redistribution of pyruvate and lactate between different pools was investigated by dual component analysis of the free induction decay signal from hyperpolarized $^{13}C$ experiments. Tumor and control groups showed differences in their fractions rather than the values of longer and shorter $T_2{^*}$ components. Fraction changing dynamics may provide an aspect for extravasation and membrane transport of pyruvate and lactate, and will be useful to determine the appropriate time window for acquisition of hyperpolarized $^{13}C$ images.