• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.679-686
• /
• 2002

Based on the alternating series expansion of error probability function due to phase noise in PSK systems, the performance evaluations for Tikhonov and Gaussian probability density functions were performed in this paper. The range of the signal-to-noise ratio of recovered carrier signal which provides the same dependency between the error performances by Tikhonov function and Gaussian function was analyzed via loss evaluation due to phase noise. The phase noise with 1/f$^2$ characteristic was generated based on the relationship of the phase noise spectral density and the modulation index for frequency modulation signal. Using the generated phase noise as the input signal for digital satellite communication receiver, the performance losses due to the phase noise were measured and evaluated with the analyzed performance characteristics.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.71-79
• /
• 1992

This paper presents a least-square algorithms of lattice structures and their use for adaptive prediction of time series generated from the dynamic system. As the view point of adaptive prediction, a new method of Identification of dynamic characteristics by means of estimating the parameters of linear auto regressive model is proposed. The fast convergence of adaptive lattice algorithms is seen to be due to the orthogonalization and decoupling properties of the lattice. The superiority of the least-square lattice is verified by computer simulation, then predictor coefficients are computed from the linear sequential time data. For the application to the dynamic characteristic analysis of unknown system, the transfer function of ideal system represented in frquency domain and the estimated one obtained by predicted coefficients are compared. Using the proposed method, the damping ratio and the natural frequency of a dynamic structure subjected to random excitations can be estimated. It is expected that this method will be widely applicable to other technical dynamic problem in which estimation of damping ratio and fundamental vibration modes are required.

• Wind and Structures
• /
• v.14 no.1
• /
• pp.15-34
• /
• 2011

Three wind-tunnel simulations of the atmospheric boundary layer (ABL) flow in suburban country exposure were generated for length scale factors 1:400, 1:250 and 1:220 to investigate scale effects in wind-tunnel simulations of the suburban ABL, to address recommended wind characteristics for suburban exposures reported in international standards, and to test redesigned experimental hardware. Investigated parameters are mean velocity, turbulence intensity, turbulent Reynolds shear stress, integral length scale of turbulence and power spectral density of velocity fluctuations. Experimental results indicate it is possible to reproduce suburban natural winds in the wind tunnel at different length scales without significant influence of the simulation length scale on airflow characteristics. However, in the wind tunnel it was not possible to reproduce two characteristic phenomena observed in full-scale: dependence of integral length scales on reference wind velocity and a linear increase in integral length scales with height. Furthermore, in international standards there is a considerable scatter of recommended values for suburban wind characteristics. In particular, recommended integral length scales in ESDU 85020 (1985) are significantly larger than in other international standards. Truncated vortex generators applied in this study proved to be successful in part-depth suburban ABL wind-tunnel simulation that yield a novel methodology in studies on wind effects on structures and air pollution dispersion.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1370-1375
• /
• 2004

This article investigates the heat transfer characteristics in a RTA system for LCD manufacturing and suggests a way to evaluate the quality of a poly-Si film from the thin film optics analysis. The transient and one-dimensional conductive/radiative heat transfer equation considering wave interference effect is solved to predict surface temperatures of thin films. In dealing with radiative heat transfer, a one-dimensional two-flux method is used and the ray tracing method is also utilized to account for the wave interference effects. It is assumed that each interface is assumed diffusive but the spectral radiative properties are included. It is found that the selective heating region exists for various wavelengths and consequently may contribute to heat the poly-Si film. Using the formalism of the characteristic transmission matrix, the lumped structure reflectance, transmittance, and absorptance are calculated and they are compared with experimental data of the poly-Si film during the SPC process via the FE-RTA (Field-Enhanced RTA) technology.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.134.2-134.2
• /
• 2012

Discrete auroras, with unique shapes embedded in diffuse auroras, are generally associated with precipitating electrons that originate from the plasma sheet and are accelerated on the way as they travel to polar regions along the field lines. Two acceleration mechanisms have been proposed: quasi-static electric fields and dispersive Alfven waves, which are believed to yield monoenergetic peaks and broadband features in the particle spectra, respectively. Hence, it should be interesting to see how the two different mechanisms, through their characteristic spectra of the accelerated electrons, produce distinct auroral images and spectra, especially in the far ultraviolet (FUV) wavelengths as the long and short Lyman-Birge-Hopfield (LBH) bands exist as well as the strong absorption band of molecular oxygen in the FUV band. In fact, we have previously shown, using the simultaneous observations of precipitating electrons and the corresponding FUV spectra, that the discrete auroras associated with inverted-V events have a stronger relative intensity of the long LBH to the short LBH compared to diffuse auroras, especially when the peak energy is above a few keV. In this paper, we would like to focus on the differences in the FUV images and spectra between the two discrete auroras of the monoenergetic and broadband cases, again based on the study using the dataset of simultaneous observations of particles and FUV spectral images.

• Wind and Structures
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2012

High-resolution wind data were acquired from a 100-m high offshore tower during the passage of Typhoon Hagupit in September, 2008. The meteorological tower was equipped with an ultrasonic anemometer and a number of cup anemometers at heights between 10 and 100 m. Wind characteristics of the strong typhoon, such as mean wind speed and wind direction, turbulence intensity, turbulence integral length scale, gust factor and power spectra of wind velocity, vertical profiles of mean wind speed were investigated in detail based on the wind data recorded during the strong typhoon. The measured results revealed that the wind characteristics in different stages during the typhoon varied remarkably. Through comparison with non-typhoon wind measurements, the phenomena of enhanced levels of turbulence intensity, gust factors, turbulence integral length scale and spectral magnitudes in typhoon boundary layer were observed. The monitored data and analysis results are expected to be useful for the wind-resistant design of offshore structures and buildings on seashores in typhoon-prone regions.

• Korean Journal of Food Science and Technology
• /
• v.10 no.1
• /
• pp.16-26
• /
• 1978

Establishment of detecting method for adulterated foods was attempted by the use of fluorescence at the irradiation of UVSL-25 mineralight. Visual observation and spectral analysis of superficial luminescence appeared to be improper as detecting method of food substances. Absorption and fluorescence spectra of powdered substances suspended in liquid paraffin or liquid sample revealed characteristic patterns depending on foods. Uniformity of samples was shown to be the most important factor to obtain reproducible results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.259-270
• /
• 2003

In order to properly design warning sounds that are affectively suitable to computer users, warning sounds used in Windows operating system were analyzed in terms of their sound properties; frequency band, spectral characteristics and physical intensity. A total of 36 warning sounds (3*4*3) were generated and tested with respect to three experimental variables. Among 178 collected affective adjectives that are related to hearing and sounds, seven representative affective adjectives were abstracted by statistical grouping techniques. In the experiment, subjective preference tests were performed for the 36 warning sounds according to the seven affective factors. From the result, the affective factors were again grouped into three major factors and the 60dB boost-type warning sounds at the low frequency band were, in general, the most preferred. followed by the 70dB cut-type sounds at the middle frequency band. These warning sounds have a characteristic of boost power spectrum below 1000Hz frequency band and received good scores on simplicity, clarity and accurateness.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.581-583
• /
• 1995

Anthocyanins in Korean pigmented rice(Oryza sativa var. Suwon 415) were analyzed to develop value-added natural pigment from rice. The pigment extracted with 1% HCl in methanol was determined as anthocyanins by characteristic absorption spectra in UV-visible ranges showing maximum absorbance at 280 nm and 530 nm. Two aglycones from acid-hydrolyzed anthocyanins were identified as cyanidin and malvidin by their $R_f$ values in several developing solvents, spectral properties, and $^1H-NMR$ analysis. Sugar moiety was determined as monoglucose by paper chromatography. The main anthocyanins in Korean pigmented rice were tentatively identified as cyanidin-3-glucoside and malvidin-3-glucoside.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.344-348
• /
• 2004

The CdSe thin films wee grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the timperature range 30K to 150K by impurity scatering and decreased in the temperature range 150K to 293K by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^7$, the MAPD of 335mV, and the rise and decay time of 10ms and 9.5ms, respectively