• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.49-55
• /
• 2020

In this study, the fatigue behavior and fatigue life characteristics of PA2200 specimens fabricated by SLS 3D printer were studied. Fatigue tests were performed according to the standard specification (ASTM E468) and fatigue life curves were obtained. In order to perform the fatigue test, mechanical properties were measured according to the test speed of the simple tensile test, and the self-heating temperature of the specimen according to the test speed was measured using an infrared temperature measuring camera in consideration of heat generation due to plastic deformation. There was no significant difference within the set test speed range and the average self-heating temperature was measured at 38.5 ℃. The mechanical strength at the measured temperature showed a relatively small difference from the mechanical strength at room temperature. Fatigue test conditions were established through the preceding experiments, and the loading conditions below the tensile strength at room temperature 23 ℃ were set as the cyclic load. The maximum number of replicates was less than 100,000 cycles, and the fracture behavior of the specimens with the repeated loads showed the characteristics of Racheting. It was confirmed that SLS 3D printing PA2200 material could be applied to the Basquin's S-N diagram for the fatigue life curve of metal materials. SEM images of the fracture surface was obtained to analyze the relationship between the characteristics of the fracture surface and the number of repetitions until failure. Brittle fracture, crazing fracture, grain melting, and porous fracture surface were observed. It was shown that the larger the area of crazing damage, the longer the number of repetitions until fracture.

• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.212-215
• /
• 1998

Pulmonary mucinous cystic tumor of borderline malignancy is very rare and distinguished from bronchogenic cyst or adenocarcinoma of bronchoalveolar type. We present the case of a 63-year-old woman with a right lower lobe mass, found by chest radiographs. The preoperative diagnosis was made as bronchoalveolar cancer by percutaneous needle aspiration of mass. Right lower lobectomy and lymph node dissections were performed. The lobectomy specimen contained variable sized multilocular cystic mucous masses, filled with mucus. Microscopically, the cystic masses are lined with tall columnar mucinous epithelium but some area contains focal cellular atypism and bronchoalveolar cancer like foci. This foci are lack of cellular atypism consistent with bronchoalveolar cancer cell. After lobectomy the patient has remained free from recurrence and distant metastasis for following 12 months period. Pulmonary mucinous cystic tumor of borderline malignancy appears to have a favorable prognosis and should be distinguished from other lung neoplasms.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.139-146
• /
• 2012

Natural hydroxyapatite powder was obtained from the calcination of bovine bones and its porous compacts were fabricated by pressureless sintering at 1100 and $1200^{\circ}C$ for 1h. To evaluate and compare their biocompatibility with porosity, we investigated the support of osteoblast cells growth and cytotoxicity using the MG-63 cell line model in vitro. Sintered hydroxyapatite ceramics have a porous microstructure with a relative density of 65 % at $1100^{\circ}C$ and 82 % at $1200^{\circ}C$. Cells adherence to the surface of hydroxyapatite ceramics was observed in a day after the cell culture, and the spreading of cytoplasm around the nucleus was shown after 3 day cell culture. Most of cells were extended to the surface of hydroxyapatite through the wide area. Cell viability was nearly the same till 3 days culturing. But the rate of cell growth is higher in the specimen sintered at $1100^{\circ}C$ than that of $1200^{\circ}C$. It indicates that the porosity is an important factor to enhance the cell viability in the porous hydroxyapatite ceramics derived from bovine bones.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.13-23
• /
• 2005

The prefabricated vertical drains (PVDs) are one of the most widely used techniques to accelerate the consolidation of soft clay deposits and dredged soil. Discharge capacity is one of the factors affecting the behavior of PVDs. In the field, a PVD is confined by clay or dredged soil, which is normally remolded during PVD installation. Under field conditions, soil particles may enter the PVD drainage channels, and the consolidation settlement of the improved subsoil may cause 131ding of the PVD. These factors will affect the discharge capacity of the PVDs. In this study an experimental study was carried out to estimate the discharge capacity of three different types of PVDs by utilizing the large-scale laboratory model testing and small-scale laboratory model testing equipments. The several factors such as confinement condition (confined by soft marine clay or dredged soil) and variations of the discharge capacity were studied with time under soil specimen confinement, The test results indicated that discharge capacity decreases with increasing load, time, and hydraulic gradient. With load application, the cross-sectional area of the drainage channel of PVD decreases because the filter of PVD is pressed into the core. The discharge capacity of the soft marine clay-confined PVDs is much lower than that of the dredged soil-confined PVDs.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.27-44
• /
• 1993

This study was performed to investigate the changes of mandibular condyle by low calcium diet and the effects of irradiation on the bone in osteoporotic state. In order to carry out this experiment, 80 seven-week old Sprague-Dawley strain rats weighing about 150 gm were selected and equally divided into one experimental group of 40 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two group and exposed to irradiation. The two irradiation groups received a single dose of 20 Gy on the jaw area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After termination, both sides of the dead rats mandibular condyle were removed and fixed with 10% neutral formalin. The bone mineral density of mandibular condyle was measured by use of dual energy X-ray bone densitometer(model DDX-alpha, Lunn Corp., U. S. A.). The mandibular condyle was radiographed with Hitex HA-80(Hitex Co., Japan). Thereafter, the obtained radiographs were observed, and the mandibular condyle was further decalcified and embedded in paraffin as the general method. The specimen sectioned and stained with hematoxylin-eosin, PAS and Rabbit Anti-Human Tumor Necrosis Factor-a observed by a light microscope. The obtained results were as follows: 1. In the non-irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days, and decrease the number of trabeculae of the condyle and resorption of the calcified cartilaginous zone were observed after 3 days. On microscopic observations, the number nd size of trabeculae were decreased after 7 days of experiment. 2. In the irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days and resorption of the calcified cartilaginous zone and decrease the number and coarse of the trabeculae of the condyle were observed. These findings were extended rather than in non-irradiated group with low calcium diet. On microscopic observations, many osteoclasts were detected and the number and size of trabeculae were somewhat decreased after 7 days. Also there was degenerative changes of tissues of bone marrow on the 14th day but that condition was restored on the 21st day of experiment. 3. In the irradiated group with normal diet, the bone mineral density of the condyle was somewhat decreased with times and degree of decrease of the number of trabeculae was somewhat larger than in the non-irradiated group with normal diet. On microscopic observations, the tissues of bone marrow were atrophic and degenerative changes but that condition was restored on the 21st day of experiment. 4. In immunocytochemical findings, in the irradiated and non-irradiated groups with low calcium diet, negative or partial positive response to TNF was observed, but positive response in the normal diet groups.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.233-247
• /
• 2012

We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.527-532
• /
• 2005

Ionic polymer metal composites (IPMC) are soft polymeric smart materials having large displacement at low voltage in air and water. The polymeric electrolyte actuator consists of a thin and porous membrane and metal electrodes plated on both faces, in impregnation electro-plating method. The response and actuation of actuator are governed. Among many factors governing the activation and response of IPMC actuator, the surface electrode plays an important role. In this study, the well-designed modification of electrode surface was carried out in order to improve the chemical stability well as electromechanical characteristics of the IPMC actuator. We employed Ion Beam Assisted Deposition (IBAD) method to prepare the topologically homogeneous thin surface electrode. After roughing the surface of Nafion membrane in order to get a larger surface area, the IPMC was prepared by impregnation for electro-plating and re- coating on the surface through traditional chemical deposition, followed by an additional surface treatment with high conductive metals with IBAD. It was observed that our IPMC specimen shows the enhanced surface electrical properties as well as the improved actuation and response characteristics under applied electric field.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.165-177
• /
• 1997

The purpose of this study was to perform on the biological activity of Magnolia and Zizyphi fructus extract mixtures on the wound healing of defected rat calvaria. For the determination of the mixture ratio of two extracts for oral administration, preliminary experiments were performed with the mixture combination of 2000 and $3000{\mu}g/ml$ of Magnolia extract, and also 20, 30, 200, 300, 2000 and $3000{\mu}g/ml$ of Zizyphi fructus extract, respectively and divided into 6 groups. The combination of extracts mixture were tested on the enhancing effect of cellular activity. The effect of the extracts mixture on the cellular activity was evaluated using MTT method and measured on the results with optical density by ELISA reader. The ability to tissue regeneration of the extracts mixture was performed by measuring new bone and new connective tissue regeneration on the 5mm defected rat calvaria for 1, 2 and 3 weeks after oral administration of 2 different dosages groups : 10:1(0.1g/kg) and 10:1(0.5g/kg). It was employed the same dosages of unsaponifiable fraction of Zea Mays L as positive controls. Each group of rat was sacrificed and en bloc section for histological examination. The effect on the cellular activity of each mixture ratio showed significantly higher in $2000{\mu}g/ml$ of Magnolia extract and $200{\mu}g/ml$ of Zizyphi fructus extract group to compare with other groups. These preliminary results showed that appropriate mixture ratio of two extracts was 10:1 of Magnolia and Zizyphi fructus extract. Histological examination on the activity of tissue regeneration of each group showed that 2weeks and 3weeks specimens of 0.5g/kg of 10:1 extract mixture of Magnolia and Ziziphi fructus administrated rat calvaria revealed significantly more osteoid and new bone formation of defected calvaria with unification of defected area than the specimens of any other negative and positive controls. Even though the specimen administrated the same dosages of unsaponifiable fraction of Zea Mays L, positive controls, showed the trend that they promote significantly the repair of calvarial defect, their bone reparative activities were less inductive than the same dosages of Magnolia and Ziziphi fructus extract mixture. These results implicated that the mixture of Magnolia and Zizyphi fructus extracts should be highly effective on the wound healing of bony defected site and might have potential possibilities as an useful drug to promote periodontal tissue regeneration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).