• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.395-398
• /
• 2001

Studies on quantity discounts have been in two directions since Buchanen[1] published that suppliers provide quantity discounts for price discrimination and for channel efficiency. The quantity discounts for price discrimination have been treated in economics. On the contrary, the quantity discounts for channel efficiency have been studied in production management with assumptions and focuses different from economics. In this paper, the differences in each area are analyzed and purchasing situations that supplier's motivation on quantity discounts occurs is analyzed and the purchasing situations for two-stage quantity discounts are specified. In conclusion, we suggest that suppliers can enhance channel coordination through two stage quantity discounts in these purchasing situations.

• Language and Information
• /
• v.15 no.2
• /
• pp.47-65
• /
• 2011

A Korean adverb '거의(geoui)' modifies predicates to generate complex predicates which have meanings of 'nearly' complete or typical properties of the modified predicates in quantities, degrees, and frequencies. The modified predicates 'complete' or 'typical' properties are referred counterfactually as standards for the generated predicates' meanings of deficiencies. These counterfactual standards can be formalized by a counterfactual conditional operator of the intensional semantics in Cresswell(1990). The deficiencies in the quantities, degrees, or frequencies of the properties can be expressed formally introducing a world-independent measure of comparison. The measure can be manufactured out of relations between intensional things at indices and their equivalence classes. The world-independent measure of comparison has a semantic structure under-specified in quantity, degree, and frequency, and seems very well-suited in describing lexical meaning of '거의(geoui)'. The lexical-semantic analysis of '거의(geoui)' shows explicitly the plausibility of the indispensable existence of the comparing measure which works across real and counterfactual worlds in natural language meaning. On the other hand, we examined Kim, young-hee(1985)'s proposal of a transition of quantificational meaning for Korean degree adverbs, where he tried to explain the quantificational meaning of Korean degree adverbs in general including '거의(geoui)' with several syntactic and semantic constraints of 'contextual deletion'. But it is shown that the quantificational meanings of the degree adverbs which Kim(1985) discussed are also explained better by their under-specified meanings in quantities, frequencies and degrees with the world-independent measure of comparison applied to their paradigmatic lexical constraint rather than Kim(1985)'s transition of meaning.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.363-368
• /
• 2000

This paper is an introduction of pessimum program for the identification of alkali-silica reaction of alkali-aggregate reaction which is known as one of a major factor of concrete deterioration. A series of gel-pat testing program was undertaken to observe the reactivity of potentially alkali-silica reactive concrete aggregates which were found to be reactive by previous petrographic examination (ASTM C 295). And then a pessimum program was performed in accordance with mortar-bar test method (ASTM C 227) with different percentage of those reactive components included in the fine aggregate source to determine the pessimum quantity. Chert and quartzite were found to be major components of reactive mineral/rock, and the pessimum condition for chert was about 3%, even though the test was performed with up to 25% of the component. In the case of quartzite, however, the mortar-bar expansion appeared to be directly proportional to the amount of quartzite sample with increasing tested quantity up to 35%. Both of the expansion results were well 3 and 6 month specified maximum limitation of 0.05% and of 0.1% respectively.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.16
• /
• pp.83-114
• /
• 2001

This paper is focussed on the main features and problems of SGA amendment. main features and problems are as below. First, SGA section 14 uses a new term, that of "satisfactory quality", which is defined in a somewhat circular way and introduces some guidelines in order to solve other problems perceived as arising under the "merchantable quality". The change was largely to assist in the better resolution of consumer disputes and not necessary for commercial disputes because the change involves the substitution of a phrase which meant something but was inappropriate to commercial disputes. As with the definition of "merchantable quality", a court can take the new formulation as an invitation to start afresh; or it can refer to the previous case law. Second, before the SGA amendment, a contract for the sale of undifferentiated part of a bulk shipped or to be shipped on a named ship was a contract for the sale of unascertained goods. So the effect was that property could not pass to the buyer, even though he had paid the price in full, before the goods become ascertained. The main object of the SGA amendment was to improve the buyer's position where he had paid for a specified quantity of goods forming an undifferentiated part of an identified bulk and the seller then became insolvent before the goods for which the buyer had paid were ascertained. The improvement was achieved by making section 16 of the SGA 1979 subject to a new section 20A and includig section 20B, under which a buyer of a specified quantity bulk can acquire a proprietary interest in the bulk. This proprietary solution still has some problems in international sale of goods. Therefore, it would be more appropriated SGA should settle disputes between parties through payment, passing of risk, delivery of goods and/or documents etc. instead of property rights like UCC.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.57-72
• /
• 2016

There are more than 30,000 chemical substances handled in domestic university laboratories. Among them, hazardous materials are selected and managed as designated substances by the standards of 19 Ministries and 16 Acts. However, domestic safety-related laws and regulations are used to manage industrial risk factors based on industrial activities. In case of installing a university chemical laboratory in accordance with the installation standards applicable to general workplaces. It is not suitable to use as a laboratory installation standard that can be applied to a chemical laboratory installed at a university such as a problem occurs in applying to a university using a small quantity of dangerous substances in a small amount. In order to establish the laboratory structure and facility standards that are appropriate for the laboratory characteristics and apply systematic laboratory safety, the National Security Administration shall apply the special handling standard of chemical experiment to places where handling less than 30 times the designated quantity of chemical substances for chemical experiments. On August 2, 2016, the regulations for the enforcement of the Dangerous Goods Safety Management Act and the standards for the structure and facilities of the university chemical laboratory were enacted. In this study, we investigated the domestic chemical substances laws and regulations to determine the chemical substances that are over-regulated in the relevant laws, and define them as substances against accidents. The management criteria for the substances were analyzed. The R value for the designation of the designated quantity by the concept of the space in the management standard was calculated.

• Management Science and Financial Engineering
• /
• v.15 no.1
• /
• pp.1-31
• /
• 2009

This paper considers the value of warehousing contract under probabilistic demands. We consider a supply chain consisting of a supplier, a retailer and its third-party warehousing partner who provides the warehousing service to the retailer through an outsourcing contract. A typical contract is specified by initial space commitment and modification schedule. The retailer decides the order quantity for the supplier and space commitment for the outsourcing contract. Since there is close relationship between order quantity and space commitment to minimize the total cost including ordering cost, inventory carrying cost, shortage cost, and warehousing cost, we develop an analytical model under probabilistic demands, where the retailer can determine the optimal order size and space commitment level jointly. We found the closed-form optimum for a single-period case and the optimal conditions for a two-period case. To evaluate the value of contract flexibility for the two-period case, we compared the total cost under two policies; one with modification, under which the base commitment can be changed at the start of each period and the other without modification. From results of our numerical analysis, we showed that the modification policy is more cost-effective as the variability of demand increases.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.363-370
• /
• 2002

This paper presents a production planning algorithm for minimizing the costs of production and subcontracting in SCM (supply chain management) environment. In our SCM environment, the several local plants that aye dispersed geographically produce parts and products. In this environment, we have to decide the production volumes of both parts and products considering the BOM (bill-of-material) structure to meet the fixed order quantity or forecasted demand quantity. Each plant produces the specified parts of product with finite production capacity. There exist subcontracting decisions relevant to the production capacity of each plant except the core process plant, and when we use the subcontractor's capacities we should be charged for the fixed subcontracting fees. The objective of this study is to solve the production planning problem, which minimizes the total costs of production, inventory, setup, and subcontracting under constraints of production and subcontracting capacity. For this problem, an integrated production planning model based on the multi-level capacitated lot sizing problem was formulated, and efficient decomposition algorithm was proposed. The experimental investigation shows that the proposed heuristic generates quite good solutions at very low computational costs.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.400-406
• /
• 2013

In high-rise buildings, high-strength concrete is widely used to reduce the section of structure members under axial load. Also, the price increase of materials is very important item in the high-rise buildings. Especially, concrete used high-pressure pump due to consecutive structural assembly. Unlike slump type of ordinary concrete, high strength concrete has different properties of concrete pumping due to viscosity. However, there have been no Korean studies on the pumping properties of high strength concrete. Therefore, this paper measures the friction factor of high strength concrete with changes in the pressure of concrete pumping. We analyzed the trends of the friction factor based on changes in the pressure of concrete pumping, and then calculated the quantity of concrete deposited for each specified concrete strength and location of placement. After comparing these results with the quantity of concrete deposited measured in field, we evaluated the pumping properties of high strength concrete. Through the tests and the review, we attempt to suggest some basic information for the In-Situ application of high strength concrete.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.642-647
• /
• 2011

In order to analyze the influence of floating marine debris (FMD) in the East China Sea (ECS), a sighting survey was conducted from July 1st to July 14th, 2009 navigating about 966 km using a training vessel "Kaya (1,737 ton)" of Pukyong National University. The sampled zones are divided into 5 transect by observation day during the survey days and again specified with 45 segments per unit hour on the survey routes. The results of distribution of FMD are as follows: 1. The quantities of FMD at the central China Sea(CE) and northern part of Taiwan(NT) were found as total mean of 90.8 ea/hr, 56.7 ea/hr, respectively, and also 36.8 ea/hr, western part of Kyushu district(WJ), 10.7 ea/hr, 8.0 ea/hr, western(OK1) and northern part(OK2) of Okinawa, respectively. 2. Temporal variation of FMD is represented by depicting the sinusoidal curve as shape as tide in CE and OK1. 3. The higher sea surface temperature (SST) is as likely as if Kuroshio current exists strongly, the less quantities are decreased. On the other hand, the coastal zone of ECS and near of Yellow Sea are increased by lower SST.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.179-196
• /
• 2019

Temporary scaffold systems in the construction site play an important role for ensuring the safety of the workers and for constructing the stable structures. To assemble the scaffold, the pipe scaffolding system, the wedge binding scaffolding system and the particular materials have been utilized. To design the material arrangement of a scaffold, firstly the configuration was determined considering the construction geometry. Then, the strength of the scaffold was confirmed and the quantity of the material was accounted. In this paper, the design method of the temporary scaffold was proposed for intending the semi-automatic procedure. In the proposed design method, the geometric design and the safety requirement were specified by the safety standard and the design flow was followed by the designer's knowledge. The size and the quantities of the materials were calculated by referring to the relation between the scaffold and the constructing structure. In the calculating procedure, three dimensional positions of each scaffold materials were calculated and recorded simultaneously. Then, three dimensional scaffold structural was drawn semi-automatically on the CAD software by using the obtained material sizes, positions and directions. The proposed design method provides us the precise quantities of scaffold materials and enables us to reduce the design effort and the cost estimation processes. In addition, the obtained results can be applied to BIM software after converting to IFC format.