• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.185-193
• /
• 2003

The modular self-wiping co-rotating twin screw extruder (SWCOR) has become the most important of twin screw machines. Screw design is one of the most important factors in determining performance of screw extruder. The screw flight and screw channel geometry of SWCOR is determined by the screw diameter, centerline distance, helix angle, and flights number. The maximum allowable throughput rate on a twin screw extruder is determined by a combination of free volume and available specific torque. In this paper we designed geometrical parameters of extruder screw and presented optimal specific torque value in K=1.55, and then developed screw design program for the screw cutting by the use of JAVA API in the twin screw extruder.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.4-10
• /
• 2012

75톤 추력급 터보펌프 터빈의 토크 특성을 성능시험 데이터를 바탕으로 분석하였다. 터빈의 비토크는 해석적으로 고정된 압력비에서 보정 선속도의 일차함수로 표현되며 이를 시험적으로 확인하였다. 일정 압력비 이상의 영역에서는 보정선속도-비토크 변화가 일정하게 나타나는 현상도 아울러 발견하였다. 분석된 토크 특성과 파이로 시동기의 시험 측정 데이터를 이용하여 터보펌프의 시동특성을 예측한 결과 터보펌프 설계회전수의 약 50%의 수준에 이르는 시간은 0.7초 이내인 것으로 나타났다. 파이로 시동기에서 터빈입구까지의 열손실은 최대회전수를 약 90 rpm 줄어들게 하는 것으로 예측되었다.

• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.27-36
• /
• 1984

This study was carried out to investigate the effects of the tilling depth, tilling travel speed and soil shear stress on the tilling load characteristics and power requirement for rotary tillers. The results obtained from the study are summarized as follows. 1. The average and maximum PTO torque increased as the tilling depth, tilling pitch and soil shear stress increased. A multiple linear regression equation to estimate the average PTO torque in terms of the above parameters was developed. 2. The ratios of maximum PTO torque to the average torque were in the range of 1.17 to 1.65 for the various tilling conditions tested. The variation in PTO torque increased greatly as the tilling pitch and soil shear stress increased, but decreased as the tilling depth increased. 3. Power requirement for the PTO shaft increased with the tilling depth, travel speed and soil shear stress, but decreased slightly as the tilling pitch increased. A multiple linear regression equation to estimate power requirement for the PTO shaft in terms of the above parameters was developed. 4. The specific power requirement for the rotary tiller was in the range of $0.008-0.015ps/cm^2$ for the various tilling conditons tested. The specific tilling capacity decreased as the tilling depth and soil shear stress increased, but increased with the tilling pitch. A multiple linear regression equation to estimate the specific tilling capacity in terms of the above parameters was developed.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.35-41
• /
• 2013

75톤 추력급 터보펌프 터빈의 토크 특성을 성능시험 데이터를 바탕으로 분석하였다. 터빈의 토크는 해석적으로 고정된 압력비에서 보정 선속도의 일차함수로 표현되며 이를 시험적으로 확인하였다. 일정 압력비 이상의 영역에서는 보정선속도-무차원 토크 변화가 일정하게 나타나는 현상도 아울러 발견하였다. 분석된 토크 특성과 파이로 시동기의 시험 측정 데이터를 이용하여 터보펌프의 시동특성을 예측한 결과 터보펌프 설계회전수의 약 50%의 수준에 이르는 시간은 0.7초 이내인 것으로 나타났다. 파이로 시동기에서 터빈입구까지의 열손실은 최대회전수를 90 rpm 정도 줄어들게 하는 것으로 예측되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.212-213
• /
• 2013

This paper proposes the algorithm of torque distribution in the electric wheel-chair using 2D joystick for drive safety. For the accurate driving performance, the specific and precise torque distribution is required in both wheels depending on signals of X-Y axis that is generated from 2D joystick. The signals of X-Y axis from joystick are transformed into the propulsion force and the torque reference. And the torque reference can be generated through the dynamic model of wheel-chair. The optimal dynamic characteristics of the electric powered wheelchair can be obtained, by adjusting the sensitivity coefficients of propulsion force and torque reference, In addition, the system takes smooth and stable control characteristics due to continuous torque output at all directions of joystick. The several simulations verify the usefulness of the proposed algorithm about torque distribution.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1315-1323
• /
• 2014

Although the power density in Double Stator Switched Reluctance Motor (DSSRM) has been improved, the torque ripple is still very high. So, it is important to reduce the torque ripple for specific applications such as Electric Vehicles (EVs). In This paper, an effective rotor shaping optimization technique for torque ripple reduction of DSSRM is presented. This method leads to the lower torque pulsation without significant reduction in the average torque. The method is based on shape optimization of the rotor using Finite Element Method and Taguchi's optimization method for rotor reshaping for redistribution of the flux so that the phase inductance profile has smoother variation as the rotor poles move into alignment with excited stator poles. To check on new design robustness, mechanical analysis was used to evaluate structural conformity against local electromagnetic forces which cause vibration and deformation. The results show that this shape optimization technique has profound effect on the torque ripple reduction.

• 오토저널
• /
• 제2권1호
• /
• pp.51-60
• /
• 1980

Experiments about engine performance using alcohol-gasoline blend as a fuel are studied. A conventional 4cycle 4cylinder gasoline engine is used. Measurements on torque, output, specific fuel consumption, and emissions are made over ignition timing and mixing ratio. Up to vol. 15% of alcohol, torque and output using alcohol-gasoline blend are almost same with using only gasoline, and specific fuel consumption is improved about 7%. In emissions alcohol-gasoline blend is more effective than gasoline.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.237-244
• /
• 2014

In this paper, we presented a study on the design of permanent magnet rotor for exterior rotor type brushless direct current(BLDC) motor. To reduce the cogging torque and torque ripple, the specific shape and magnetization pattern of permanent magnets in BLDC motors are suggested. Firstly, four permanent magnet models with different shapes and magnetization arrays are presented. The results from the finite element method(FEM), the most effective model for reducing cogging torque and torque ripple was presented. In addition, to confirm the steady state performance, the torque-speed characteristic analysis has been performed with variable speed and load. Finally, the best permanent magnet model for reducing cogging torque and torque ripple with appropriate torque-speed performance was selected through the comparison according to the device volume.

• 에너지공학
• /
• 제23권2호
• /
• pp.170-174
• /
• 2014

This paper presents the influences of ethanol addition to gasoline on bench test a spark ignition engine performances and emissions characteristics. The use of ethanol gasoline blended fuels decrease the brake power and brake torque, and increases the brake specific fuel consumption (BSFC). Ethanol gasoline blended fuels show lower brake torque and brake power and higher BSFC than gasoline. When ethanol containing oxygen is blended with gasoline, the combustion of the engine becomes better and therefore CO emission is reduced. HC emissions decrease to some extent as ethanol added to gasoline increase, as the percentage of ethanol in the blends increased, NOx emission was decreased under various engine speeds.

• The Journal of Korean Physical Therapy
• /
• 제12권1호
• /
• pp.9-13
• /
• 2000

The purpose of this study was to determine the overflow effect and cross training effect of isometric quadriceps training that performed in specific angle of unilateral let. Ten healthy students with an average age of 24 years$(24.1\pm1.3)$, were participated in this study. Then 5 subjects in each group were chosen at random to train using only right quadriceps muscle two time per day(group 2), five times a week and the other 5 subjects(group 1) were chosen to train one times per day, five times a week for 2 weeks at only 50 degrees (contract 6 seconds, rest 10 seconds, 3 sets). Before and after the training, isometric quadriceps muscle testing of the both leg was Performed at three different angles, 60, 50 and 40 degrees respectively by BHN-COM (isokinetic dynamometer) in sitting position. The data was analyzed with paired t-test to determine significant difference between before and after training. In this study, we have found that the isometric quadriceps muscle training on specific angle of right side produced overflow effect In healthy subjects. However, increasing the peak torque of specific angle(training angle) of trained limb did not have an effect on increasing the peak torque of contralateral limb. These results demonstrate that the cross training effect did nut found in this study but a alight increase of peak torque of the untrained limb would recognized the possibility of cross training effect.