• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.51-57
• /
• 2018

In Korea, the Air Quality Conservation Act and the Petroleum and Petroleum Substitute Fuel Business Act stipulate certain quality standards for fuels distributed in Korea, thereby striving to reduce vehicle performance and emissions. Domestic petroleum products import and produce all the crude oil from each oil refiner so that the quality of the petroleum product is different according to the characteristics of the crude oil. As a result, vehicles have been improved by using the physical properties calculated through the physical property measurement that has tried to improve the accuracy of the measurement of the energy consumption efficiency of the automobile by using standard fuel from abroad. In this study, the same test procedure and method as the test method of domestic gasoline vehicle emission are applied using four samples of gasoline and the latest gasoline vehicle which are actually distributed, and the performance evaluation is performed. The purpose of this study is to contribute to improvement of vehicle technology and fuel quality by collecting necessary basic data and obtaining data on the effect of differences in gasoline property on vehicle emissions. The results of the test showed that the emission of gases (NMOG, CO) from gasoline vehicles was the most influenced by the sulfur content, unlike the previous studies that the vehicles emission had the greatest influence on the distillation characteristics and the specific gravity of aromatic compounds. The catalytic reaction such as the poisoning action of the three-way catalyst which is the abatement device was interfered and the emission was increased. The distillation characteristics and specific gravity of aromatic compounds were found to affect the emission of vehicles. According to the physical properties of the fuel, the emission difference was 28.0% in the urban mode and 17.6 % in the highway mode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.327-332
• /
• 2000

The objective of this study was to improve the defects of lightweight cement concrete by treating with redispersible polymer powders. The statistical relationships of water-cement ratios, contents of lightweight aggregates and polymer powers and be used for predicting the concrete strength. It was found that the varieties and techniques adopted in this experiment were capable of identifying the influence of various tested for air contents, flow test, water absorption, specific gravity, flexural and compressive strength. This study showed that fundamental properties were very affected by cement- lightweight aggregate ratio, polymer-cement ratio and water-cement ratio.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.962-971
• /
• 2004

This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.

• Culinary science and hospitality research
• /
• v.17 no.4
• /
• pp.285-294
• /
• 2011

Using mulberries, a kind of functional food rising these days, we made muffins that people often eat to find the best recipe for mulberry muffins. Also, to find their quality characteristics and show possibility of making new products using mulberries, tests of pH, specific gravity, specific volume, chromaticity, mechanical quality characteristics and preference were done. As more mulberry concentrate was added, pH of muffin dough was decreased and specific gravity was increased. Specific volume was decreased as more mulberry concentrate was added Weight became heavier while volume decreased; and it seems decrease of volume was caused by additives like roughage of concentrate. For chromaticity, all L, a, b values decreased. Acceptance test of muffins with 15% substituted sample showed the highest figure and the rest of the samples were similar to one another in general. For texture, hardness and chewiness were increased as more mulberry concentrate was added, but springiness and adhesiveness were decreased. For example, general interest was the highest in 20% added group, and the order is as follows; 20% > 15% > 10% > 0% > 25%. Addition of mulberry concentrate could lower the quality of products by decreasing their volumes and increasing their hardness. Therefore, this research suggests that the optimum addition rates of mulberry concentrate should be between 15~20%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.217-222
• /
• 2003

This study was carried out to investigate the geotechnical characteristics and field application of soil mixed with waste lime. Waste lime used in this study is producted as a by-product in the manufacturing process of making Na$_2$CO$_3$from local chemical factory in Incheon. Currently about 320 milton tons of waste lime are accumulated and annually 100,000 tons are producted. In this study, feasible use of waste lime mixed with granited whathered soil, clay, crushed rock was invesigated through laboratory tests including specific gravity test, sieve analysis, hydrometer analysis, compaction test, CBR test. Field investigations were conducted on the road construction site in Incheon.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.423-426
• /
• 1996

The conditions to be satisfied with SOC(State-of-Charge) indicator installed on the electric vehicle were that it should be used under frequent loading conditions and that it should enable the monitor to adjust to the aging effect. But, the state-of-charge test requires a lengthy stabilization period after discharge cycles and the ampere-hour test requires the knowledge of the battery capacity in terms of amp-hours. However, a monitoring technique combining the state-of-charge test to enable the monitor to adjust to the aging effect with the ampere-hour test to use under frequent loading condition is studied and implemented on a microcontroller-based circuit in this paper. Specially, optical fiber is used to realize hydrometer which is immune to electromagnetic interference and toxic environment and makes it possible to be used in a wide temperature range.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.1
• /
• pp.83-90
• /
• 2003

In order to offer some fundamental data for recycling the excavated rocks, the component and mechanical characteristics was investigated for the excavated rocks, by means of X-ray diffraction analysis, strength test, slacking test and abrasion test were performed. It appeared that the unconfined compressive strength and the elastic wave velocity were the highest in the sound rock. The dissipation rate by stability tests was found to be high in the case of the slacking index of 98% because of more bedding and more clay minerals. The apparent specific gravity of some crushed aggregate was decreased because they included easily weathered minerals while both the absorption and the abrasion were increased. The results in this study were expected to be useful for recycling the excavated rocks as a concrete aggregate.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.201-208
• /
• 2007

This paper is research results of investigating the elastic settlement behavior of the coastal caisson structure built on the sandy deposit by comparing results of centrifuge model experiments and those of existing methods of estimating elastic settlement. Basic soil property tests such as specific gravity test, grain size distribution test and organic content test with disturbed soil sampled from the site were carried out. The centrifuge experiment of model satisfying the required design criteria was performed under 50 of artificial accelerated gravitational force condition. The Centrifuge model experimental results were compared and analyzed with the current methods of estimating settlement based on the elastic modulus obtained from the results of odeometer tests and empirical methods from literature reviews.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.64-68
• /
• 2005

In recent years, there has been a growth of the manufacture and application of magnesium products because of its small specific gravity as well as its relatively high strength. However, there are so many studies to assure good formability because magnesium sheet alloy is difficult to form. In this study, uniaxial tensile and biaxial tensile test of AZ31 magnesium sheet alloy with thickness of 1.2mm were performed at room temperature. Uniaxial tensile test were performed until $7\%$ of engineering strain. R-values and stress-strain curve were obtained. Biaxial tensile tests with cruciform specimen were performed until the breakdown of the specimen occurs. The yield loci are made by application of plastic work theory. The results are compared with the theoretical predictions based on the Hill and Logan-Hosford model. However, next study will be performed at warm-temperature because the specimens are broken under the $0.5\%$ of equivalent strain at biaxial tensile test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1674-1678
• /
• 2017

Objective: The aim of the study was to evaluate genetic correlations between the behavioural profile and performance in laying hens as an indirect answer to the question whether the observed behavioural responses are associated with increased levels of stress in these birds. Methods: The assessment of birds' temperament was carried out using the novel objects test. The behavioural test was conducted in two successive generations comprising 9,483 Rhode Island White (RIW) birds (approx. 4,700 individuals per generation) and 4,326 Rhode Island Red (RIR) birds (approx. 2,100 individuals per generation). Based on the recorded responses, the birds were divided into two groups: a fearful profile (1,418 RIW hens and 580 RIR hens) and a brave/curious profile (8,065 RIW hens and 3,746 RIR hens). The birds were subjected to standard assessment of their performance traits, including SM, age at sexual maturity; ST, shell thickness; SG, egg specific gravity; EW, mean egg weight; IP, initial egg production; and HC, number of hatched chicks. The pedigree was three generations deep (including two behaviourrecorded generations). Estimation of the (co)variance components was performed with the Gibbs sampling method, which accounts for the discrete character of the behavioural profile denotation. Results: The analyses revealed negative correlations between the performance traits of the laying hens and the behavioural profile defined as fearful. In the group of fearful RIW birds, delayed sexual maturation (0.22) as well as a decrease in the initial egg production (-0.30), egg weight (-0.54), egg specific gravity (-0.331), shell thickness (-0.11), and the number of hatched chicks (-0.24) could be expected. These correlations were less pronounced in the RIR breed, in which the fearful birds exhibited a decline in hatchability (-0.37), egg specific gravity (-0.11), and the number of hatched chicks (-0.18). There were no correlations in the case of the other traits or they were positive but exhibited a substantial standard error, as for the egg weight. Conclusion: To sum up the results obtained, it can be noted that behavioural responses indicating fearfulness, i.e. escape, avoidance, and approach-avoidance may reflect negative emotions experienced by birds. The negative correlations with performance in the group of fearful hens may indirectly indicate a high level of stress in these birds, especially in the white-feathered birds, where stronger performance-fearfulness correlations were found. Fearful birds should be eliminated from breeding by inclusion of the behavioural profile in the selection criterion in the case of laying hens.