• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.239-244
• /
• 1998

Fusion temperature of fly ash was determined with wasted glass wool and borax using ash fusion determinator, 0.5wt% of bentonite and water glass used as binder, 50wt% of wasted glass wool added to fly ash, fusion temperature of fly ash was 1, 156$^{\circ}C$. Pellet was prepared, and then sintered at 1, 00$0^{\circ}C$ and 1, 10$0^{\circ}C$. Water-absorption rate, specific gravity, porosity and pore structure of sintering aggregate was determined.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.310-313
• /
• 2003

Complex permittivities of human head simulating liquids were measured by a sample holder of terminated slotted coaxial line with a movable probe at mobile communication frequencies. The validity of the liquid measurement system was checked by experiments with the reference liquids. Liquids of ingredients for human brain suggested in IEEE draft and those made by the authors were measured by this slotted line system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권9호
• /
• pp.1354-1358
• /
• 2002

Two hundred and ten post-larvae (PL) of Macrobrachium rosenbergii (14.5-14.9 mg) were equally distributed in two experimental groups and fed with either steam cooked or extruded pellet for a period of 60 days. Physical evaluation and growth promoting effect of both the pellets were assessed. Significantly higher (p<0.05) water stability, absorption and protein efficiency ratio (PER) were recorded in extruded pellet than the steam cooked pellet. Nutrient loss was minimum in the extruded pellet for which lower feed conversion ratio (FCR) (p<0.05) was recorded in this group. However, weight gain, relative growth and specific growth rate (SGR) in both the groups were not significantly different (p>0.05). Although insignificant (p>0.05) but higher amylase activity was recorded in steam pellet fed group. Survival was not affected by feeding either of the diets.

• ETRI Journal
• /
• 제24권2호
• /
• pp.176-179
• /
• 2002

Using scaled models for an anatomical head model and a simple head model, we investigated the effects of head size on specific absorption rate characteristics for two mobile phones operating at 835 MHz and 1765 MHz. Our results showed that a larger head produced a higher localized SAR at 835 MHz. However, at 1765 MHz, the differences among the head models were insignificant since the superficial absorption was dominant over the effects of head shape and size. A larger head produced a lower whole-head averaged SAR at both frequencies.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.336-341
• /
• 2014

Dosimetry of radiating electromagnetic wave from mobile devices to human body has been evaluated by measuring Specific Absorption Rate (SAR). Usual SAR measurement system scans the volume by robot arm to evaluate RF power absorption to human body from wireless devices. It is possible to fast estimate the volume SAR by software deleting robot moving time with the 2D surface SAR data acquired by arrayed probes. This paper shows the principle of fast SAR measurement and the measured data comparison between the fast SAR system and the robot scanning system. Data of the fast SAR is well corresponding with data of robot scanning SAR within ${\pm}3$ dB, and its dynamic range covers from 10 mW/kg to 30 W/kg with 4.8 mm probe diameter.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.570-575
• /
• 1997

In this days, the thinner film of dielectric materials is required while its capacitance is required to be still large at the VLSI process. Most of such VLSI have MOS structures. For the research on this requirement, MOS capacitors were fabricated on the silicon wafer in four different thickness groups by RF sputtering method. SiO of the SiO/TiN film is used as the insulating layer and TiN is chosen as the barrier against the diffusion of Al which is the terminal connected by ohmic contact because TiN has the advantageous properties such as good thermal stability and very low diffusion rate in spite of its relatively low specific resistance. In this study their electrical and optical characteristics are investigated to find refractive index, absorption coefficient and Permittivity.

• 한국작물학회지
• /
• 제60권3호
• /
• pp.282-292
• /
• 2015

최근 소비자들의 건강에 대한 관심이 증가함에 따라 건강기능성 성분이 다량 함유 되어 있는 유색벼 품종의 안전 육묘를 위한 종자의 발아특성, 적정 침종기간 및 적정 파종량을 구명하기 위한 시험결과는 다음과 같다. 1. 현미색이 흑색인 조생흑찰 및 신명흑찰은 비중이 1.0이하의 물에 뜨는 종자가 85.7~86.3%로 대부분을 차지하였고, 비중이 1.06이상 충실한 종자 비율은 1.0~1.3%로 다른 흑미에 비해 상대적으로 낮았다. 한편 신토흑미, 흑진주, 흑설, 흑남, 흑광은 비중이 1.0이하가 15.3~43.7%, 1.0~1.06이 24.6~39.4%, 1.0이상이 25.5~55.7%로 다양한 무게의 종자가 분포해 있었다. 그러나 적미인 홍진주, 적진주, 건강홍미는 일반벼인 일미벼와 같이 충실한 종자인 1.06이상의 비율이 84.0~86.6%로 높았고, 반면 비중이 1.0~1.06은 2.5~4.1%, 비중이 1.0이하의 물에 뜨는 종자의 비율은 9.3~12.1%로 낮았다. 2. 흑미는 일반적으로 물온도에 관계없이 발아율이 적미보다 낮았고 발아속도가 느렸으며 평균발아일수도 길었고 수분흡수율도 낮았다. 그 결과 80%이상 발아하기 까지 침종기간이 적미나 일반벼 보다 2~4일 가량 더 결렸다. 이것은 흑미는 비중이 1.0이하의 가벼운 종자가 적미보다 훨씬 높았기 때문이다. 3. 상자육묘시 흑미의 출아율은 10일묘에서 75.2~82.2%, 30일묘에서 85.3~90.9%로 적미보다 10일묘에서는 4.5~8.0%, 30일묘에서는 0~3.3% 낮았는데 이것은 미출아율 종자가 많았기 때문이었다. 4. 기계이앙 육묘시 유색벼의 안전 육묘를 위한 적정 파종량은 관행 일미벼 어린모 및 중묘의 상자당 성묘개체수를 기준으로 흑미의 경우 어린모는 200~220g, 중묘는 110~130g이었고 적미는 일반벼와 같이 어린모 220g, 중묘 130g이었다.

• Safety and Health at Work
• /
• 제5권3호
• /
• pp.113-117
• /
• 2014

The mechanisms by which iron is absorbed are similar to those of divalent metals, particularly manganese, lead, and cadmium. These metals, however, show different toxicokinetics in relation to menarche or menopause, although their interaction with iron is the same. This review focuses on the kinetics of these three toxic metals (manganese, lead, and cadmium) in relation to menarche, pregnancy, and menopause. The iron-manganese interaction is the major factor determining sex-specific differences in blood manganese levels throughout the whole life cycle. The effects of estrogen overshadow the association between iron deficiency and increased blood lead concentrations, explaining why women, despite having lower ferritin concentrations, have lower blood lead concentrations than men. Iron deficiency is associated with elevated cadmium levels in premenopausal women, but not in postmenopausal women or men; these findings indicate that sex-specific differences in cadmium levels at older ages are not due to iron-cadmium interactions, and that further studies are required to identify the source of these differences. In summary, the potential causes of sex-specific differences in the blood levels of manganese, lead, and cadmium differ from each other, although all these three metals are associated with iron deficiency. Therefore, other factors such as estrogen effects, or absorption rate as well as iron deficiency, should be considered when addressing environmental exposure to toxic metals and sex-specific differences in the blood levels of these metals.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2018-2023
• /
• 2003

An experiment is conducted for measuring the performance of an air tool, which is operated at 100,000 RPM at the unloaded state with the low torque. An experimental apparatus is developed as the power absorption type dynamometer. Inlet static pressure, flow rate, RPM and force are measured simultaneously. Torque, output power and specific output power are obtained. Those experimental results are compared with the experimental results obtained on a commercial dynamometer. However, no commercial dynamometers are available for measuring the torque above 30,000RPM. In order to use the commercial dynamometer, a reduction gear is applied to the shaft of dynamometer. Torque and power obtained on the commercial dynamometer show 50% lower than those obtained on a power absorption type dynamometer, because the inertia force is added to the air tool rotor for the braking system. Moreover, the starting RPM on the commercial dynamometer is less than 40,000RPM. From the compared results, they show that the power absorption type dynamometer should be applied for measuring the performance of an air tool operating at low torque and high RPM.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.159-181
• /
• 2024

In the present study, the effect of geometrical parameters of two different types of aluminum thin-walled structures on energy absorption under three-bending impact loading has been investigated experimentally and numerically. To evaluate the effect of parameters on the specific energy absorption (SEA), initial peak crushing force (IPCF), and the maximum crushing distance (δ), a design of experiment technique (DOE) with response surface method (RSM) was applied. Four different thin-walled structures have been tested under the low-velocity impact, and then they have simulated by ABAQUS software. An acceptable consistency between the numerical and experimental results was obtained. In this study, statistical analysis has been performed on various parameters of three different types of tubes. In the first and the second statistical analysis, the dimensional parameters of the cross-section, the number of holes, and the dimensional parameter of holes were considered as the design variables. The diameter reduction rate and the number of sections with different diameters are related to the third statistical analysis. All design points of the statistical method have been simulated by the finite element package, ABAQUS/Explicit. The final result shows that the height and thickness of tubes were more effective than other geometrical parameters, and despite the fact that the deformations of the cylindrical tubes were around forty percent greater than the rectangular tubes, the top desirability was relevant to the cylindrical tubes with reduced cross-sections.