• Journal of the Korean Wood Science and Technology
• /
• v.2 no.3
• /
• pp.3-16
• /
• 1974

One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.80-88
• /
• 2013

Carrot (Daucus carota L. var. sativa) is one of the most extensively used vegetable crops in the world and a significant source of nutrient because of its high content of ${\beta}$-carotene, well known as the precursor of vitamin A carotenoid. However, seed-hairs generated and elongated from the epidermal cell of seeds inhibit absorption and germination by various factors such as carotol and so on. Accordingly, mechanical hair removal process is essential before commercialization of carrot seeds. Because of this process, producers will have additional losses such as time consuming, manpower, capital and so on. Furthermore, physical damage of seeds causes irregular germination rate. To overcome such cumbersome weaknesses, new breeding program for developing hairless-seed carrot cultivar has been needed and studies for molecular markers related to seed-hair characteristic is needed for a new breeding program. Therefore, in this study, cDNA libraries from seeds of short-hair seed phenotype CT-SMR 616 OP 659-1 line, hairy-seed phenotype CT-SMR 616 OP 677-14 line and short-hair seed phenotype CT-ATR 615 OP 666-13 line, hairy-seed phenotype CT-ATR 615 OP 671-9 were constructed, respectively. Furthermore, 1,248 ESTs in each line, total 4,992 ESTs were sequenced. As a result, 19 SNP sites and 14 SNP sites in each of 2 combinations were confirmed by analyzing these EST sequences from short-hair and hairy-seed lines. Then we designed SNP primer sets from EST sequences of SNP sites for high resolution melting (HRM) analysis. Designed HRM primers were analyzed using hairy seed phenotype CT-SMR 616 OP 1040 line and short-hair seed phenotype CT-SMR 616 OP 1024, 1025, 1026 lines. One set of HRM primers showed specific difference between the melting curves of hairy and short-hair seed phenotype lines. Based on this result, allele-specific (AS) PCR primers were designed for easier selection between hairy-seed carrot and hairless seed carrot. These results of HRM and AS-PCR are expected to be useful in breeding of hairless seed carrot cultivar as a molecular marker.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.89-115
• /
• 1968

1. The experiment was carried out for investigating the interaction between potassium nutrition and thermoperiod (as an environment regulating factor) in relation to behaviors of several nutrients including phosphorus-32 and Potassium-42 in IPOMOEA BATAS. 2. To obtain same condition to trace the behaviors of phosphorus and potassum-42 they were simultaneously incorporated to roots. The determination of each CPM by counting twice with adequate interval and calculating true CPM of each isotope according to different half-life, was carried out with satisfactory. 3. Some specific symptoms i.e, chlorosis and withering of growing point under the condition of lower potassium level were found and was accelerated by the low night temperature. 4. A manganese shortage in growing point of the lower potassium level was found by activiation analysis and very low distribution ratio of phosphorus-32 and potassium-42 in the growing point of the lower potassium level was manifested, though the contents of nitrogen, phosphorus, potassium, sodium and magnesium were not in great difference. 5. In addition to the low water content with appearence of "hard", shorterning internode and lower ratio of roots to shoot as well as the symptoms of potassium deficiency such as brown spot in leaf blade and necrosis of leaf margin were appeared at later stage of experiment at the lower potassium level. 6. Very stimulating vegetative growth, e.g, large plant length, leaf expansion, increasing node number and fresh weight as well as high ratio of roots to shoot, high water content was resulted in the condition of higher potassium level. 7. A specific interaction between higher potassium level and thermoperiod was found, that is, the largest tuber production and the largest ratio of roots to shoot were resulted in the combined condition of higher potassium level and constant temperature while the largest plant length, fresh weight etc. i.e. the most stimulative vegetative growth was resulted in the combined condition of higher potassium level and low night temperature. 8. Comparatively low water content in the former condition of stimulative tuber production was resulted(especially at the tuber thickening stage), while high water content in the latter condition of stimulative vegetation was resulted though the higher potassium level made generally high water contents. 9. The nitrogen contents of soluble and insoluble did not make distinct difference between the lower and higher potassium level. 10. Though the phosphorus contents were not distinctly different by the potassium level, the lower potassium level made the percentage of phosphorus increased at tuber forming stage accumulating more phosphorus in roots, while the higher potassium level decreased percentage of phosphorus at that stage. 11. The higher potassium level made distinctly high potassium contents than the lower potassium level and increased contents at the tuber forming stage through both conditions. 12. The sodium contents were low in the condition of higher potassium level than the lower potassium level and decreased at tuber forming stage in both conditions, on the contary of potassium. 13. Except the noticeable deficeney of manganese in the growing point of the lower potassium level, mangense and magnesium contents in other organs did not make distinct difference according to the potassium level. 14. Generally more uptake and large absorption rate of phosphorus-32 and potassium-42 were resulted at the higher potassium level, and the most uptake, and the largest absorption rate of phosphorus and potassium-42 (especially potassium-42 at tuber forming stage) were resulted in the condition of higher potassium level and constant temperature which made the highest tuber production. 15. The higher potassium level stimulated the translocation of phoshorus-32 and potassium-42 from roots to shoots while the lower potassium level suppressed or blocked the translocation. 16. Therefore, very large distribution rate of $p^{32}$, $K^{42}$ in shoot, especially, in growing point, compared with roots was resulted in the higher potassium level. 17. The lower potassium level suppressed the translocation of phosporus-32 from roots to shoot more than that of potassium-42. 18. The uptake of potassium-42 and translocation in IPOMOEA BATATAS were more vivid than phosphorus-32. 19. A specific interaction between potassium nutrition and thermoperiod which resulted the largest tuber production etc. was discussed in relation to behaviors of minerals and potasium-42 etc. 20. Also, the specific effect of the lower and higher potassium level on the growth pattern of IPOMOEA BATATAS were discussed in relation to behaviors of minerals and isotopes. 21. An emphasize on the significance of the higher potassium level as well as the interaction with the regulating factor and problem of potassium level (gradient) for crops product ion were discussed from the point of dynamical and variable function of potassium.

• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.301-310
• /
• 2005

The effects of defatted soy flour on the physicochemical characteristics of dough and bread making properties were studied. Defatted soy flour is added to wheat flour for bread-making in order to maximize the use of isoflavones in the soybean. Different particle sizes of both defatted soy flour and wheat flour were prepared by grinding and sievingwith meshes. In the mixograph test, the addition of defatted soy flour to wheat flour increased the requirement for water and decreased the dough development time. Water absorption rates were also investigated to determine the optimum quantity of water for good dough. As the level of defatted soy flour mixed with wheat flour increased, the sedimentation and P.K. values decreased. In comparison with control, the bread made with defatted soy flour especially had a lower specific loaf volume. Specific loaf volume of wheat flour-defatted soy flour bread prepared (Ed- this is an incomplete sentence, it's only a subject clause, and I don't how what you intend to state). In terms of the staling rate and hardness of the wheat flour-defatted soy flour bread, the increased defatted soy flour had a faster staling rate during storage at 5? than at 25? for 5days. From the result of sensory evaluation, wheat flour-defatted soy flour breads containing up to $4\%$ defatted soy flour were rated as being of high quality.

• Korea journal of population studies
• /
• v.9 no.1
• /
• pp.41-53
• /
• 1986

The purpose of this paper is two-fold. One is to investigate the determinants of the demand supply of labor, and another is to project long-term demand and supply of labor. The paper consists of three parts. In the first part, theoretical models and important hypotheses are discussed: for the case of a labor supply model, issues regarding discouraged worker model, permanent wage hypothesis, and relative wage hypothesis are examined and for the case of a demand model, issues regarding estimating an employment demand equation within the framework of an inverted short-run produc- tion function are inspected. Particularly, a theoretical justification for introducing a demographic cohort variable in a labor supply equation is also investigated. In the second part, empirical results of the estimated supply and demand equations are analyzed. Supply equations are specified differently between primary and secondary labor force. That is, for the case of primary labor force groups including males aged 25 and over, attempts are made to explain the variations in participation behavior within the framework of a neo-classical economics oriented permanent wage hypothesis. On the other hand, for the case of females and young male labor force, variations in participation rates are explained in terms of a relative wage hypothesis. In other words, the participation behavior of primary labor force is related to short-rum business fluctuations, while that of secondary labor force is associated with intermediate swings of business cycles and demographic changes in the age structure of population. Some major findings arc summarized as follows. (1) For the case of males aged 14~19 and 2O~24 groups and females aged 14∼19, the effect of schhool enrollment rate is dominant and thus it plays a key role in explaining the recent declining trend of participation rates of these groups. (2) Except for females aged 20∼24, a demographic cohort variable, which captures the impact of changes in the age structure on participation behavior, turns out to show positive and significant coefficients for secondary labor force groups. (3) A cyclical variable produce significant coefficients for prime-age males and females reflecting that as compared to other groups the labor supply behavior of these groups is more closely related to short-run cyclical variations (4) The wage variable, which represents a labor-leisure trade-off turns out to yield significant coefficients only for older age groups (6O and over) for both males and females. This result reveals that unlike the experiences of other higer-income nations, the participation decision of the labor force of our nation is not highly sensitive with respect to wage changes. (5)The estimated result of the employment demand equation displays that given that the level of GNP remains constant the ability of the economy to absord labor force has been declining;that is, the elasticity of GNP with respect to labor absorption decreasre over time. In the third part, the results of long-term projections (for the period of 1986 and 1995) for age-sex specific participation rates are discussed. The participation rate of total males is anticipated to increase slightly, which is contrary to the recent trend of declining participation rates of this group. For the groups aged 25 and below, the participation rates are forecast to decline although the magnitude of decrease is likely to shrink. On the other hand, the participation rate of prime- age males (25 to 59 years old) is predicted to increase slightly during 1985 and 1990. For the case of females, except for 20∼24 and 25∼34 age groups, the participation rates are projected to decrease: the participation rates of 25∼34 age group is likely to remain at its current level, while the participation rate of 20∼24 age group is expected to increase considerably in the future (specifi- cally, from 55% in 1985 to 61% in 1990 and to 69% in 1995). In conclusion, while the number of an excess supply of labor will increase in absolute magnitude, its size as a ratio of total labor force is not likely to increase. However, the age composition of labor force is predicted to change; that is, the proportion of prime-age male and female labor force is projected to increase.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.292-298
• /
• 1980

In order to improve the storage stability of powdered soybean curd, moisture sorption characteristics of the curd stored at specific relative humidity and temperature were investigated. The results obtained are summarized as follows; 1. When the fresh soybean curd (2cm thickness) was dried in a hot air drier at $55^{\circ}C$, it took 18 hrs to reduce its moisture content from 85% to 8.8%, and drying rate was very high during the first 5 hrs. 2. Equilibrum moisture content (E.M.C.) of powdered soybean curd by freeze drying was higher than that of sample by got air drying, but the particle size did not influence E. M. C. 3. The monolayer value of freeze dried powder of high E. M. C was higher than that of the hot air dried(8.30 vs 7.35). 4. The free energy for moisture absorption of freeze dried powder at 11% RH were 1285.1 cal/mole, 1323.5 cal/mole at $15^{\circ}C$ and $30^{\circ}C$, respectively, and the free energy of freeze dried product was lower that of hot air dried product. 5. The moisture sorption rate constant was not affected by particle size, and it showed that the moisture sorption rate decreased as temperature was increased. The rate constant of powder produced by freeze drying were 0.00804 at $15^{\circ}C$ and 0.00696 at $30^{\circ}C$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1107-1115
• /
• 2011

In this paper, a headset multiple-input multiple-output(MIMO) antenna for on-body application is proposed and the antenna performance with body effect and the impact on human body are investigated. The proposed MIMO antenna is composed of two planar inverted-F antennas(PIFA) above ground plane and an isolator located between the two antennas enhance the isolation characteristic. Simulation was carried to analyze the effect of human body on antenna performance when a human body is located in the near field of the antenna. According to the measurement result, the diversity performance of the proposed antenna can be considered good since ECC(Envelope Correlation Coefficient), which commonly indicates the performance of a MIMO antenna, remains below 0.1 over the ISM band. The measured SAR values for antennas 1 and 2 are 0.575 W/kg and 0.571 W/kg, respectively when 250 mW input power in engaged. These values satisfy the FCC guideline which states that the 1-g average SAR should be lower than 1.6 W/kg.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.213-219
• /
• 2012

Recently, we are simultaneously exposed by various electromagnetic sources due to an increase of mobile communication services. However, EMF(Electric, Magnetic and Electromagnetic Field) study has been performed mainly about only single frequency. The objective of this paper is to develop an multiple-frequency exposure system for in vitro experiment. The exposure unit for in vitro experiments was designed by radial transmission line type to get broadband characteristics to generate signals of CDMA at 836.5 MHz and WCDMA at 1950 MHz frequency simultaneously. The modulated signals were delivered to the conical antenna through amplifier, digital attenuator and RF combiner. SAR values were obtained by the averaged values of 3 measured values at 9 points in petri dish using the fiber optic temperature probe. The measured return loss was under -15 dB. For 1 W input power, the mean value and standard deviation of SAR were $0.105{\pm}0.019$ for the CDMA frequency and $0.262{\pm}0.055$ for the WCDMA frequency.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.92-97
• /
• 2011

Landfill is the main treatment method for bottom-ash because it has not only an irregular particle size and ingredients but also not proper recycling treatment. The aim of this study is to raise recycling rate of bottom-ash(nonplasticity pulverulent) and for the purpose of alternatives of clay to investigate the properties of Bottom-ash (B/A)-Hard Clay (H/C) bodies with controlled interfacial chemistry properties. After investigating the sedimentation height of suspensions with controlled pH, it was discovered that there was no hetero-polar aggregation for mixed slips because hard clay and bottom-ash had similar interfacial chemistry properties. Also, bulk density, water absorption, and microstructure properties of each pellet was observed that made by silp casting method and manufactured at $50^{\circ}C$ intervals between $1000{\sim}1250^{\circ}C$. As a result, dispersed slip of clay and bottom ash are possible for slip casting and plastic forming process because they exhibit Bingham plastic behavior. Products that made by slip with dispersed clay and bottom ash are not only suitable for KS L 4201 and KS L 1001 at $1250^{\circ}C$ but it is also possible to apply for ceramic and sanitary ware because specific gravity was about 15 % lighter than general ceramic materials.

• The Journal of Internal Korean Medicine
• /
• v.26 no.2
• /
• pp.440-452
• /
• 2005

Objective: In the winter of 2002, severe acute respiratory syndrome(SARS) began to spread throughout the world. More than 5,000 cases were reported in China, including over 1,700 cases in Hong Kong Special Administrative Region(Hong Kong SAR). The total number of cases reported from Canada and Singapore was more than 200. The total number of SARS cases world-wide reached 8,437 with incidences in 29 counties. Mortality from SARS is estimated at $10{\sim}12%$. When the SARS outbreak occurred in China, the State Administration of Traditional Chinese Medicine of China immediately initiated clinical research projects on the use of integrated herbal medicine and Western medicine for treating SARS. and, in Hong Kong SAR, research on the use of herbal medicine for the prevention and treatment of SARS. Reports were released during convalescence. The objective of this study is to overview twelve clinical SARS reports of WHO on the treatment of SARS with herbal medicine and evaluate the efficacy and safety of treatment of SARS with herbal medicine, and further to share experiences and knowledge of the treatment of SARS. Methods: Twelve clinical reports about SARS from the WHO were selected, overviewed and evaluated for efficacy and safety of treatments of SARS. Results and Conclusion: Twelve clinical reports about SARS showed that the integrated treatment may have advantages, and the advantages are reflected in the following findings: Firstly, herbal medicine is not targeted only at a specific etiology or a certain pathological link, but also at the pathological status of the patients at that particular time. Therefore, comprehensive readjustment was made through various angles, targets and channels to restore the balance of the body. Secondly, there are advantages in the differentiation of the disease and the treatment. Based on the various symptoms, herbal medicine enables the physician to adopt the most suitable principle, provide individual treatment, and to administer medicine in accordance with the actual process and nature of the illness. Thirdly, there are advantages in the results of the treatment; herbal medicine can relieve symptoms, promote absorption of lung inflammation, improve the degree of blood oxygen saturation, regulate immunological functions, reduce the required dosage of glucocorticoid and other Western medicines, and reduce case fatality rate, in addition to lowering the cost of treatment.