• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.25-32
• /
• 2001

The kinetics of ester interchange reaction of dimethyl naphthalate(DMN) with ethylene glycol(EG) has been studied in the range of 180-200 $^{\circ}C$ using zinc and manganese catalysts. The reaction was performed in a semibatch reactor under nonisothermal condition and the degree of reaction was calculated from experimental data of methanol removal rate and reaction temperature. As a reaction model, both the functional group model and the molecular species model were applied and analysed. In case of zinc catalyst, the ratio of reaction rate of methyl hydroxyethyl naphthalate(MHEN) with EG on that of DMN with EG is about 1.4, whereas in case of manganese catalyst the ratio is about 4.3, which implies that the reaction rate is quite dependent on the type of catalyst. In case of zinc catalyst, the reaction order of catalyst concentration on either DMN or MHEN and EG is less than 1, whereas in case of manganese catalyst, the reaction order is larger than 1. The activation energy for zinc and manganese catalyst, irrespective of the type of molecular species, e.g., DMN and MHEN, were found to be 25000 and 28750 cal/mol, respectively. As a result of comparing two reaction model, the molecular species model fits well for the experimental data.

• Journal of the Korean Society of Combustion
• /
• v.5 no.1
• /
• pp.7-18
• /
• 2000

Numerical simulations of counterflow non-premixed $CH_4/C_2HCl_3/Air$ flames added 8%(by volume) C2HCl3 on the fuel side are conducted at atmospheric pressure using a detailed chemical reaction mechanism in order to understand the effect of strain rates. A detailed sensitivity analysis is also performed in order to assess the relative influence of each reaction on the flame established at a strain rate of 200s-1. The structure of flames (i.e., temperature, velocity, and concentration of species) established at both a strain rate of 150s-1 and 300s-1 are investigated. As the strain rate increases, the "flame zone" is restricted to a narrower range and the position of maximum temperature is shifted to the fuel side. The concentrations of major species, H2O, CO, H2, HCl, Cl2, and Cl are decreased with increased strain rate. The reaction involving chlorine, CH4 + Cl $\rightarrow$ CH3 + HCl, instead of the reaction, CH4 + H $\rightarrow$ CH3 + H2 influences the consumption of methane. C2HCl3 + OH $\rightarrow$ CHCl2 + CHOCl and HCl + OH $\rightarrow$ H2O + Cl, are major reactions, through which OH radicals are consumed.

• Journal of the Korean Society of Combustion
• /
• v.19 no.1
• /
• pp.39-44
• /
• 2014

A short reaction mechanism for premixed $CH_4/CHF_3/Air$ flames was developed with a reduction method of the combined application of simulation error minimization (SEM) which included connectivity method and principal component analysis. It consisted of 43 species and 403 elementary reactions at the condition of less than 5% of maximum error. The calculation time operated with a short mechanism was over 5 times faster than one with a detailed reaction mechanism. Good agreement was found between the flame speeds calculated by the short reaction mechanism and those by the detailed reaction mechanism for the entire range of $CHF_3/CH_4$ mole ratios and equivalence ratios. In addition excellent agreements were determined for the profiles of temperature, species concentration, and the production rates of the various species. So the short reaction mechanism was able to accurately predict the flame structure for premixed $CH_4/CHF_3/Air$ flames.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.964-972
• /
• 2011

This work investigated the difference between $Fe^{2+}$ autoxidation-induced and Fenton-type cleavage of pBR322 plasmid DNA. $^{\cdot}OH$ generation reactions in the absence and presence of $H_2O_2$ under various conditions were also investigated. Although both the $Fe^{2+}$ autoxidation and Fenton-type reactions showed DNA cleavage and $^{\cdot}OH$ generation, there were significant differences in their efficiencies and reaction rates. The rate and efficiency of the cleavage reaction were higher in the absence of 1.0 mM of $H_2O_2$ than in its presence in 20 mM phosphate buffer. In contrast, the $^{\cdot}OH$ generation reaction was more prominent in the presence of $H_2O_2$ and showed a pH-independent, fast initial reaction rate, but the rate was decreased in the absence of $H_2O_2$ at across the entire tested pH range. Studies using radical scavengers on DNA cleavage and $^{\cdot}OH$ generation reactions in both the absence and presence of $H_2O_2$ confirmed that both reactions spontaneously involved the active oxygen species $^{\cdot}OH$, ${O_2}^{\cdot-}$, $^1O_2$ and $H_2O_2$, indicating that a similar process may participate in both reactions. Based on the above observations, a new mechanism for the $Fe^{2+}$ autoxidation-induced DNA cleavage reaction is proposed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.243-245
• /
• 2013

Rate equations are exactly solved for the reversible consecutive reaction of the first-order and the time-dependence of concentrations is analytically determined for species in the reaction. With the assumption of pseudo first-order reaction, the calculation applies and determines the concentration of product accurately and explicitly as a function of time in the unimolecular decomposition of Lindemann and in the enzyme catalysis of Michaelis-Menten whose rate laws have been approximated in terms of reactant concentrations by the steady-state approximation.

• Journal of the Korean Society of Safety
• /
• v.2 no.1
• /
• pp.17-29
• /
• 1987

The extraction mechanism of Zinc from aqueous solution with D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) dissolved in Kerosene was studied by the single drop method. The effect of the concentrations of reactant species on the extraction rate, Zinc and hydrogen ion in the continuous phase and D2EHPA in the dispersed, was studied for the drop rise period by the experiment. Then a theoretical analysis on the basis of Handlos-Baron modle was carried out. It becomes clear that the extraction rate was controlled by the neutral complex forming reaction at the drop surface from both analysises. From effect of the concentrations of species on the reaction rate, the extraction rate at the drop surface is considered to be as follows. $${\gamma}_{pn}=9.42{\times}10^{-7}\;\frac{[Zn^{2+}][(HR)_2]^{3/2}}{[H^+]^{3/2}}$$

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.422-430
• /
• 2002

The kinetics of polycondensation of bishydroxyethyl naphthalate has been studied in the range of 241 -$260^{\circ}C$ using antimony trioxide catalyst. The reaction was performed in a batch reactor and the concentration of reaction mixture was measured with HPLC. The activation energy values of forward and reverse reaction determined from molecular species model were found to be 19.7 and 31.4 kcal/mole, respectively, and the equilibrium constants were in the range of 1.4-2.0, which were larger than that of polycondensation of PET and varied to some degree with temperature. It was confirmed by applying the Flory's distribution function that the reaction rate of the hyroxyethyl group does not depend on the molecular size. By applying functional group model, we observed that there was few difference between the activation energy of the forward reaction and that of reverse reaction, therefore the equilibrium constant has almost constant value of 1.4. The rate constants obtained from functional group model was about 3-4 times larger than that from molecular species model, which showed that both model explains the reaction system well. Although the molecular species model should predict the concentration of as many as ten molecules, it fits for the experimental results well.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2034-2040
• /
• 2007

Efficient catalytic systems, where Ni or Pd is introduced in a supporting material of nanoporous carbon, have been developed for a liquid-phase hydrogenation of carboxylic acids and ketones at room temperature. It has been found that the catalysts reliably show high activities and selectivities for the hydrogenation to alcohols even in acidic conditions, and the catalytic activities depend on the preparative method of catalysts, the hydrogen pressure, the agitation rate, and the catalytic species. The hydrogenation of carboxylic acids and ketones clearly shows that the reaction rate is affected by the electronic and the steric effects, and a plausible reaction mechanism using metal hydrides as catalytic species is proposed.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.219-224
• /
• 2003

An analysis procedure for the MCFC channel flow has been developed to predict the fuel cell performance. As for the electrochemical reaction, among several chemical reaction models, one that fits the data best is adopted after a comprehensive comparative study. The Wavier-Stokes, energy, and species equations are solved to obtain the velocity, temperature and concentration fields for a specified average current density. The procedure is iterative as the local current density, or the reaction rate, is allowed to vary with the gas composition. A series of calculations are then carried out to examine the effects of gas flow rate, gas composition, gas usage rate, inlet gas temperature, and average current density on the fuel cell performance. The fuel cell characteristics, such as the temperature, current density distributions, and the concentration fields, for various operating conditions are presented and discussed.

• Journal of applied mathematics & informatics
• /
• v.6 no.1
• /
• pp.127-142
• /
• 1999

This paper develops a methematical model for growth and exploitation of a schooling fish species using a realistic catch-rate function and imposing a tax on the catch to control harvesting. Fishing effort is assumed to depend on the net revenue. The steady states of the system are determined and their local and global stabil-ity are discussed. Taking the tax as a control variable; the optimal harvest policy is formulated and solved as a control problem. The results are illustrated with the help of a numerical example.