• Journal of The Korean Astronomical Society
• /
• v.49 no.6
• /
• pp.261-288
• /
• 2016

We present the results of simultaneous monitoring observations of $H_2O$ $6_{1,6}-5_{2,3}$ (22GHz) and SiO J=1-0, 2-1, 3-2 maser lines (43, 86, 129GHz) toward five post-AGB (candidate) stars, using the 21-m single-dish telescopes of the Korean VLBI Network. Depending on the target objects, 7 - 11 epochs of data were obtained. We detected both $H_2O$ and SiO maser lines from four sources: OH16.1-0.3, OH38.10-0.13, OH65.5+1.3, and IRAS 19312+1950. We could not detect $H_2O$ maser emission toward OH13.1+5.1 between the late OH/IR and post-AGB stage. The detected $H_2O$ masers show typical double-peaked line profiles. The SiO masers from four sources, except IRAS 19312+1950, show the peaks around the stellar velocity as a single peak, whereas the SiO masers from IRAS 19312+1950 occur above the red peak of the $H_2O$ maser. We analyzed the properties of detected maser lines, and investigated their evolutionary state through comparison with the full widths at zero power. The distribution of observed target sources was also investigated in the IRAS two-color diagram in relation with the evolutionary stage of post-AGB stars. From our analyses, the evolutionary sequence of observed sources is suggested as OH65.5+1.3${\rightarrow}$OH13.1+5.1${\rightarrow}$OH16.1-0.3${\rightarrow}$OH38.10-0.13, except for IRAS 19312+1950. In addition, OH13.1+5.1 from which the $H_2O$ maser has not been detected is suggested to be on the gateway toward the post-AGB stage. With respect to the enigmatic object, IRAS 19312+1950, we could not clearly figure out its nature. To properly explain the unusual phenomena of SiO and $H_2O$ masers, it is essential to establish the relative locations and spatial distributions of two masers using VLBI technique. We also include the $1.2-160{\mu}m$ spectral energy distribution using photometric data from the following surveys: 2MASS, WISE, MSX, IRAS, and AKARI (IRC and FIS). In addition, from the IRAS LRS spectra, we found that the depth of silicate absorption features shows significant variations depending on the evolutionary sequence, associated with the termination of AGB phase mass-loss.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.367-380
• /
• 2014

Tsunami take away life, wash houses away and bring devastation to social infrastructures such as breakwaters, bridges and ports. The targeted coastal structure object in this study can be damaged mainly by the tsunami force together with foundation ground failure due to scouring and liquefaction. The increase of excess pore water pressure composed of oscillatory and residual components may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, the solitary wave was generated using 2D-NIT(Two-Dimensional Numerical Irregular wave Tank) model, and the dynamic wave pressure acting on the seabed and the estimated surface boundary of the vertical revetment. Simulation results were used as an input data in a finite element computer program(FLIP) for elasto-plastic seabed response. The time and spatial variations in excess pore water pressure, effective stress, seabed deformation, structure displacement and liquefaction potential in the seabed were estimated. From the results of the analysis, the stability of the vertical revetment was evaluated.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.3-8
• /
• 2007

최근 도로 네트워크 환경에서 이동 객체 위치 정보를 관리하고 이동 객체의 미래 위치를 예측하는 이동 객체 위치 예측 시스템의 필요성이 나날이 증가되고 있다. 이동 객체위치 예측 시스템은 교통 관제 및 다양한 응급 상황 시 이동 객체의 미래 위치를 신속히 예측하기 위해 사용되며, 보다 편리한 위치 기반 서비스의 제공을 가능하게 해준다. 이러한 시스템을 위한 대부분의 미래 인덱싱 기법은 일반적으로 이동 객체의 미래 위치 예측을 위해 과거 이동 궤적을 이용하고 있다. 그러나, 수많은 이동 객체의 과거 이동 궤적 관리가 어렵고, 실시간으로 변화하는 이동 객체의 미래 궤적을 반영하기 위한 방대한 미래 인덱스의 갱신 요청으로 인해 인덱스 유지 비용이 증가하여 미래 위치 질의 요청에 대한 신속한 처리 성능이 떨어지게 된다. 따라서 본 논문에서는 이동 객체 위치 예측 시스템에서 방대한 이동 객체의 과거 이동 궤적으로부터 효율적으로 미래 위치를 예측하기 위해 셀 기반의 미래 인덱싱 방법인 PFCT-Tree(Probability Future Cell Trajectory-Tree)를 제시한다. PFCT-Tree는 방대한 과거 이동 궤적을 셀 단위로 재구성하여 인덱스 크기를 줄이고, 셀 내부 경험치를 기반으로 장기간 질의 시 빠른 미래 위치를 예측할 수 있다. 또한 신속한 미래 이동 궤적의 갱신 속도를 향상시키기 위해 미래 시간을 미래 궤적과 분리하여 인덱싱함으로써 위치 예측 오류로 인한 미래 인덱스 갱신 비용을 최소화 할 수 있다. 마지막으로 실험을 통해 도로 네트워크 환경에서 PFCT-Tree가 기존 인덱싱 기법들보다 갱신 및 검색 성능이 우수함도 입증하였다.ential oil (Bergamot, Grapefruit, Lemon, Petigrain)은 농도 의존적으로 ROS 생성을 증가시켰다. 이상의 결과를 종합하여 볼 때 citrus essential oil은 MSH에 의한 melanin 생성을 억제하는 것으로 보아 미백제로서의 개발 가능성이 있는 것으로 사료된다.가 사용될 수 있음을 제시한다.찍 발견되어 크기는 작았으며, 육안적으로 폴립의 Yamada 형태의 분류는 II, III의 형태를 띠고 있었다.EX>로 한반도 후기 백악기의 고지자기극$(Lat./Long.=70.9^{\circ}N/215.4^{\circ}E,\;A_{95}=5.3^{\circ})$의 위치와 유사하므로 암석의 생성 시기는 후기 백악기로 판단하였다. 한편 함평분지에 분포하는 백악기 화산암류에서는 한 개의 정자화 방향과 두 개의 역자화 방향이 확인되었다. 이들 특성잔류자화 방향은 백악기 화산암 형성 당시 암석에 기록된 성분으로써 당시 지구자기장의 상태를 기록한 것으로 해석하였으며, 이중 정자화 방향을 함평분지 화산암의 대표 방향으로 채택하였다 함평분지 화산암의 고지자기 극의 위치는 정자극의 경우는 $Lat./Long.=70.2^{\circ}N/199.5^{\circ}E,\;(K=18.1,\;A_{95}=9.6^{\circ})$ 이며 역자극의 경우는 $Lat./Long.=65.5^{\circ}S/251.3^{\circ}E,\;(K=7.1,\;A_{95}=20.7^{\circ})$이다. 이중 정자극의 위치는 한반도의 후기 백악기극의 위치와 통계적으로 동일한 것으로 나타나 함평분지 화산암

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.481-486
• /
• 2014

This study aims at enhancing the performance of file-referring octree, suggested by Han(2014), for efficiently querying huge 3D point clouds, acquired by the 3D terrestrial laser scanning. Han's method(2014) has revealed a problem of heavy declining in query speed, when if it was applied on a very long tunnel, which is the lengthy and narrow shaped anisometric structure. Hereupon, the shape of octree has been analyzed of its influence on the query efficiency with the testing method of generating an independent octree in each isometric subdivision of 3D object boundary. This method tested query speed and main memory usage against the conventional single octree method by capturing about 300 million points in a very long tunnel. Finally, the testing method resulted in which twice faster query speed is taking similar size of memory. It is also approved that the conclusive factor influencing the query speed is the destination level, but the query speed can still increase with more proximity to isometric bounding shape of octree. While an excessive unbalance of octree shape along each axis can heavily degrade the query speed, the improvement of octree shape can be more effectively enhancing the query speed than increasement of destination level.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.165-172
• /
• 2011

Visitors' behaviors within an exhibition space are a substantial means to grant spatial arrangement and validity of exhibits. Therefore, the study analyzed visitors' behaviors in the viewpoint of attraction power and holding power of exhibits on the basis of exhibition layout of real science museums. Through the analysis, the study grasped efficiency of analysis index and exhibition environment elements which might have an effect on planning the exhibition space of a large-scale museum and producing detailed ranges of exhibition. The main indicators used are: 1. Attraction power: it indicates the relative incidence of people who have stopped in front of an object/exhibit during the exhibition tour. It is calculated by dividing the number of people who stop by the total number of people who have visited the museum or gallery. 2. Holding power: it measures the average time spent in front of an information/communication element. It is calculated by dividing the average time of stay by the time "necessary" to read an element. As a result, It was expected that attraction power and holding power of exhibit would be increased when moving line of seeing was inductive. However, when the traffic movements of seeing was inductive, repetitive seeing of exhibit was almost never realized and visitors had a strong tendency which viewed on their way of moving without viewing on their way of stopping. On the other hand, it may mean that density of exhibit is low or size of exhibition space is small that most of exhibits within exhibition space have high attraction power and holding power. As Gwacheon National Science Museum, when a museum is composed of many large-scale exhibit halls, it should be formed by separating the main moving line of seeing from the optional moving line of seeing through visitors' natural choice of exhibit and proper inducement of moving line of seeing. In such structure, exhibition environment of the main moving line has an effect on attraction of exhibit and the use of optional moving line acts as a factor to increase attraction. In addition, it is thought that attribute of exhibit and proper arrangement of rest space within exhibition space will increase holding power of exhibit.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.36-43
• /
• 2018

In Korea, 'forest welfare' is officially included as a policy object and used as an academic term. The Korea Forest Service strives to provide a forest welfare services suitable for each life cycle from birth to death, and the public is highly aware of the need for these policies. The demand for National Woodland Burial Grounds is expected to increase as the interest in natural burials including woodland burial is increasing. As the demand for the Woodland Burial Grounds is increasing, there is only one National Woodland Burial Grounds currently available. Although other forest welfare facilities, such as natural recreation forests, must have undergone feasibility assessment according to relevant laws before approval of the designation, there are no institutions performing Woodland Burial Grounds feasibility assessments at the time. Therefore, it is necessary to consider the policies to cope with the increased demand. This study used GIS to prepare the basic data to be used in the process of selecting suitable forest locations. The area that cannot be used according to related laws was analyzed and the size of the possible areas in the state forests was assessed.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.179-197
• /
• 2020

Topographic normalization reduces the terrain effects on reflectance by adjusting the brightness values of the image pixels to be equal if the pixels cover the same land-cover. Topographic effects are induced by the imaging conditions and tend to be large in high mountainousregions. Therefore, image analysis on mountainous terrain such as estimation of wildfire damage assessment requires appropriate topographic normalization techniques to yield accurate image processing results. However, most of the previous studies focused on the evaluation of topographic normalization on satellite images with moderate-low spatial resolution. Thus, the alleviation of topographic effects on multi-temporal high-resolution images was not dealt enough. In this study, the evaluation of terrain normalization was performed for each band to select the optimal technical combinations for rapid and accurate wildfire damage assessment using PlanetScope images. PlanetScope has considerable potential in the disaster management field as it satisfies the rapid image acquisition by providing the 3 m resolution daily image with global coverage. For comparison of topographic normalization techniques, seven widely used methods were employed on both pre-fire and post-fire images. The analysis on bi-temporal images suggests the optimal combination of techniques which can be applied on images with different land-cover composition. Then, the vegetation index was calculated from the images after the topographic normalization with the proposed method. The wildfire damage detection results were obtained by thresholding the index and showed improvementsin detection accuracy for both object-based and pixel-based image analysis. In addition, the burn severity map was constructed to verify the effects oftopographic correction on a continuous distribution of brightness values.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.94-99
• /
• 2004

Radiochromic film has several advantages; high spatial resolution, relatively low spectral sensitivity, near tissue equivalence and requires no special development procedure. The object of this study was to measure the anisotropy of an Ir-192 source (microSelectron manufactured by Nucletron) in a few mm regions from the source, using the GafChromic film. The GafChromic film was calibrated in the range of 0∼105 Gy, using a 4 MV photon beam, and the anisotropy function measured in an acrylic phantom using the GafChroimic film. The data obtained gave agreement to within 4.4% of the Monte Calro calculation, by J. F. Williamson, at a radial distance of 2.5 mm with polar angles of 50 to 130$^{\circ}$, while a maximum deviation of 17.6% was observed at angles near 140$^{\circ}$and agreement within 3.7% at a radial distance of 5 mm at polar angles between 35 to 150$^{\circ}$ and a maximum deviation of 7.6% was observed at angles near 30$^{\circ}$. A GafChromic film can be used as a more efficient detector for measuring the anisotropy of an HDR $^{192}$ Ir source at close distances than any other detector.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.89-97
• /
• 2006

Purpose : To evaluate MR image qualities we developed a new MRI phantom with the fixation structures necessary to position it into coil firmly. Materials and methods : We designed MRI phantom for eight evaluation items such as slice thickness accuracy, high contrast spatial resolution, low contrast object detectability, geometry accuracy, slice position accuracy, image intensity uniformity, percent signal ghosting and signal to noise ratio. For the positioning of phantom at coils, the fixation structures were set up on the surface of phantom. Six different MRI units were used for test the possibility for the clinical application and their image qualities were evaluated. Results : We acquired appropriate MR image qualities enough for the evaluation on all used MR units and confirmed that their evaluations were within reliable values compared to real ones for some items. The positioning of our phantom into head coils with fixation structures worked well for proper imaging. Conclusion : We found that our prototype of MRI phantom had the possibility of clinical application for MR image quality assessment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.63-77
• /
• 2015

Tsunami take away life, wash houses away and bring devastation to social infrastructures such as breakwaters, bridges and ports. The coastal structure targeted object in this study can be damaged mainly by the wave pressure together with foundation ground failure due to scouring and liquefaction. The increase of excess pore water pressure composed of oscillatory and residual components may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, the bore was generated using the water level difference, its propagation and interaction with a vertical revetment analyzed by applying 2D-NIT(Two-Dimensional Numerical Irregular wave Tank) model, and the dynamic wave pressure acting on the seabed and the surface boundary of the vertical revetment estimated by this model. Simulation results were used as input data in a finite element computer program(FLIP) for elasto-plastic seabed response. The time and spatial variations in excess pore water pressure ratio, effective stress path, seabed deformation, structure displacement and liquefaction potential in the seabed were estimated. From the results of the analysis, the stability of the vertical revetment was evaluated.