• Korean Institute of Interior Design Journal
• /
• v.23 no.2
• /
• pp.90-98
• /
• 2014

This study has analyzed the meaning of observation time in the course of acquiring the information of subjects who observed the space of hall in subway stations to figure out the process of spatial information excluded and the features of intensive searching. The followings are the results from the analysis of searching process with the interpretation of the process for information acquirement through the interpretation of observation area and time. First, based on the general definition of observation time, the reason for analyzing the features of acquiring spatial information according to the subjects' observation time has been established. The feature of decreased analysis data reflected that of observation time in the process of perceiving and recognizing spatial information, which showed that the observation was focused on the enter of the space during the time spent in the process of observing the space and the spent time with considerable exclusion of bottom end (in particular, right bottom end). Second, while the subjects were observing the space of hall in subway stations, they focused on the top of the left center and the signs on the right exit the most, which was followed by the focus on the both side horizontally and the clock on the top. Third, the analysis of consecutive observation frequency enabled the comparison of the changes to the observation concentration by area. The difference of time by area produced the data with which the change to the contents of spatial searching in the process of searching space could be known. Fourth, as the observation frequency in the area of I changed [three times -> six times -> 9 times], the observation time included in the area increased, which showed the process for the change from perception to recognition of information with the concentration of attention through visual information. It makes it possible to understand that more time was spent on the information to be acquired with the exclusion of the unnecessary information around.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1046-1053
• /
• 2006

In the large scale recent reclaiming works performed within the wide spatial boundary, evaluation of long-term consolidation settlement and residual settlement of the whole construction area is sometimes made with the results of the limited ground investigation and measurement. Then the reliability of evaluation has limitations due to the spatial uncertainty. Additionally, in case of large scale deep excavation works such as urban subway construction, there are a lot of hazardous elements to threaten the safety of underground pipes or adjacent structures. Therefore it is necessary to introduce a damage prediction system of adjacent structures and others. For the more accurate analysis of monitoring information in the wide spatial boundary works and large scale urban deep excavations, it is necessary to perform statistical and spatial analysis considering the geographical spatial effect of ground and monitoring information in stead of using diagrammatization method based on a time-series data expression that is traditionally used. And also it is necessary that enormous ground information and measurement data, digital maps are accumulated in a database, and they are controlled in a integrating system. On the abovementioned point of view, we developed Geomonitor 2.0, an Internet based real time monitoring program with a new concept by adding GIS and geo-statistical analysis method to the existing real time integrated measurement system that is already developed and under useful use. The new program enables the spatial analysis and database of monitoring data and ground information, and helps the construction- related persons make a quick and accurate decision for the economical and safe construction.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1421-1434
• /
• 2020

The frequency and intensity of heatwaves have been increasing due to climate change. Since urban areas are more severely damaged by heatwaves as they act in combination with the urban heat island phenomenon, every possible preparation for such heat threats is required. Many overseas local governments build heat maps using a variety of spatial information to prepare for and counteract heatwaves, and prepare heatwave measures suitable for each region with different spatial characteristics within a relevant city. Building a heat map is a first and important step to prepare for heatwaves. The cases of heat map construction and thermal environment analysis involve various area distributions from urban units with a large area to local units with a small area. The method of constructing a heat map varies from a method utilizing remote sensing to a method using simulation, but there is no standard for using differentiated spatial information according to spatial scale, so each researcher constructs a heat map and analyzes the thermal environment based on different methods. For the above reason, spatial information standards required for building a heat map according to the analysis scale should be established. To this end, this study examined spatial information, analysis methodology, and final findings related to Korean and oversea analysis studies of heatwaves and urban thermal environments to suggest ways to improve the utilization efficiency of spatial information used to build urban heat maps. As a result of the analysis, it was found that spatial, temporal, and spectral resolutions, as basic resolutions, are necessary to construct a heat map using remote sensing in the use of spatial information. In the use of simulations, it was found that the type of weather data and spatial resolution, which are input condition information for simulation implementation, differ according to the size of analysis target areas. Therefore, when constructing a heat map using remote sensing, spatial, spectral, and temporal resolution should be considered; and in the case of using simulations, the spatial resolution, which is an input condition for simulation implementation, and the conditions of weather information to be inputted, should be considered in advance. As a result of understanding the types of monitoring elements for heatwave analysis, 19 types of elements were identified such as land cover, urban spatial characteristics, buildings, topography, vegetation, and shadows, and it was found that there are differences in the types of the elements by spatial scale. This study is expected to help give direction to relevant studies in terms of the use of spatial information suitable for the size of target areas, and setting monitoring elements, when analyzing heatwaves.

• Korean Journal of Remote Sensing
• /
• v.30 no.3
• /
• pp.375-381
• /
• 2014

Soil moisture is an essential satellite-driven variable for understanding hydrologic, pedologic and geomorphic processes. The European Space Agency (ESA) has endorsed soil moisture as one of Climate Change Initiates (CCI) and had merged multi-satellites over 30 years. The $0.25^{\circ}$ coarse resolution soil moisture satellite data showed correlations with variables of a water stress index, Temperature-Vegetation Dryness Index (TVDI), from a stepwise regression analysis. The ancillary data from TVDI, Land Surface Temperature (LST) and Normalized Difference Vegetation Index (NDVI) from MODIS were inputted to a multi-regression analysis for estimating the surface soil moisture. The estimated soil moisture was validated with in-situ soil moisture data from April, 2012 to March, 2013 at Andong observation sites in South Korea. The soil moisture estimated using satellite-based LST and NDVI showed a good agreement with the observed ground data that this approach is plausible to define spatial distribution of surface soil moisture.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.45-52
• /
• 2014

In recent years, The importance of the river pollution management has increased and central and local governments are making constant effort to work out river pollution problems. Accordingly, this paper is to take a closer look at applications of spatial data and river pollution information(aerial photograph, parcel information, pollution source, GPS data et al.). More exactly, the purpose of the present paper is to offer an applications of spatial information for development of the river pollution management system. In order to provide a framework for more detailed consideration of the quantitative analysis of river pollution source and management plan by apply GPS and GIS. For that reason, this paper was to build pollution management system of river by spatial analysis. It is to be hoped that this paper will contribute to establish the management policy for urban stream pollution source preservation.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.665-685
• /
• 2021

This study focused on the a 20-year evaluation of the dynamism of critical thermal anomalies in Busan metropolitan area prompted by unusual infrastructural development and demographic growth rate. Archived Landsat thermal data derived-LST was the major input for UTFVI and hot spot analysis (Getis-Ord Gi^*). Results revealed that the surface urban heat island-affected area has gradually expanded overtime from 23.32% to 32.36%; while the critical positive thermal anomalies (level-3 hotspots) have also spatially increased from 19.88% in 2000 to 23.56% in 2020, recording a net LST difference of > 5℃ between the maximum level-3 hotspot and minimum level-3 coldspot each year. It is been observed that thermal conditions of Busan have gradually deteriorated with time, which is potentially inherent in the rate of urban expansion. Thus, this work serves as an eye-opener to powers that be, to think and act constructively towards a sustainable thermal conform for city dwellers.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.295-299
• /
• 2007

Today, ubiquitous technology (e.g. computers or networked devices pervade everywhere we are) has enlarged by great advancement of information and communication technologies. If ubiquitous technologies is applied to, innovation of spatial information technology is expected. traditional spatial information technologies such as survey, GIS, GPS, LBS, and RS and ubiquitous technology gradual1y have been converged. The aim of this study is to create shared visions in spatial information technologies by scenario based roadmapping. So, we surveyed the state of the art in main spatial information technologies, market status and patent map. Consequently, prospects of spatial information technologies is suggested. The aim of 1st and 2nd NGIS project focused on map supplier was to develop digital map(e.g. framework data, various thematic map). As a result, the best technology of digital mapping is achieved in the world. But, there is not enough to develop GIS and LBS solution. Current market in GIS S/W and Telematics is about 384billon won and 250billion won. a patent is applied in the order, like a USA(1571case, 47%), Japan(883case, 26%), EU(478case, 14%), Korea(446case, 13%). In the future, spatial information technology fused on ubiquitous technology will be focused on user's demand and developing convenience context. The developing target will be realtime monitoring of 3D spatial data based on high resolution coordinate system, sharing and supplying multi-sensor data considered users demand, location service by ubiquitous technologies.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.321-328
• /
• 2021

This study considered measures to support the establishment of surveying and spatial information in preparation for the unification of South and North Korea and the subsequent construction of national infrastructure. The organization identified and analyzed spatial information about North Korea, road and railway-oriented SOC construction projects, and examined the applicability of the latest technologies to narrow the technical gap with North Korea and quickly establish land spatial information. To prepare a support process appropriate for the situation in North Korea, technical and human support details and considerations were reviewed through a case analysis of spatial information construction for developing countries. In addition, the main result was "Presenting Efficient Utilization of Human Resources and Equipment for the Establishment of Spatial Information in North Korea," establishing an efficient utilization plan for the human resources and equipment needed in the support process based on technology support. It is expected that the South Korean government will minimize the negative impact on future land infrastructure construction by first conducting research in inter-Korean economic cooperation and national infrastructure construction and establishment of spatial information construction plans.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.4 no.4
• /
• pp.141-145
• /
• 2023

This study surveyed the changes in the proportion of Ecological and Natural Map (ENM) grades in Korea, the distribution ratio of ENM 1st-grade areas by region, and the current status of regional public appeals for the five-year period from 2017 to 2021. The nationwide changes in ENM grades revealed an increase in 1st-grade, 3rd-grade, and separately managed areas but a decrease in the ratio of 2nd-grade areas. Nationwide, Gangwon had the highest distribution ratio of 1st-grade areas, at 46.77%, while Gwangju had the lowest, at 0.05%. In the five-year study period, 383 appeals concerning ENM grades were received and processed. Gangwon had the greatest number of appeals, with 96, while Sejong had the fewest, with 1. A significant correlation was observed between the distribution ratio of 1st-grade areas and public appeals.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.93-103
• /
• 2018

The purpose of this study is to analyze the spatial cluster characteristics of fire using long-term fire data. For this, fire data which were broke out in the last 40 years were converted into GIS data and spatial analysis was performed at Gangwon-do province's minimum administrative district level. In order to grasp the spatial distribution of the fire, Moran's I, Geary's Ci and Getis-Ord's Gi*, which are methods that analyze the local indicators of spatial association(LISA), were used. By integrating the characteristics of the spatial distribution of fire by integrating the results obtained from each analysis, the advantages of the individual analysis methods were reflected in the study results. As a result of the study, hotspot areas of fire in Gangwon-do was derived out. Among the hot spot areas, some areas, where the fire frequency is higher than the adjacent areas, have been identified. The results of this study can be used as information for predicting the fire hazard area and relocating of fire-fighting facilities in the study area.