• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.324-328
• /
• 2005

This study is to figure out uncertainty relationship between input data and calibrated parameter on unsteady hydraulic routing model. The uncertainty would be present to model results as a variant water surface profile along the channel. Firstly, Manning's n is calibrated through the model with assumed uncertainty on input hydrograph. Then, spatially distributed n-values sets based on the calibrated n values are used to get water profile of each n-values set. The results show that ${\pm}0.002$ of error in Manning's n cause ${\pm}30cm$ of maximum water surface differences at the Sumjin river.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.311-314
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using the PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF-TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of a center frequency approximately 40MHz focusing transducer fabricated in this study showed very wide bandwidth which could give an axial spatial resolution better than 30um in the B-mode image for biological tissues.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.84.1-84.1
• /
• 2012

Recent spectropolarimetric observations with high spatial resolution and high polarization sensitivity have provided us with new insight to better understand the quiet-Sun magnetism. This talk is concerned with the ubiquitous transient horizontal magnetic fields in the quiet-Sun, as revealed by the Solar Optical Telescope (SOT) on board Hinode satellite. Exploiting the SOT data with careful treatment of photon noise, we reveal the enigmatic properties of these horizontal magnetic fields such as lifetime, size, position in terms of granular structure, occurrence rate, three-dimensional structure, total magnetic flux, field strength distribution, relationship with the meso- and super-granulations and so on. Based on these observational consequences, we conjecture that the local dynamo process, which takes place in a relatively shallow layer with the granular size, produces these transient horizontal magnetic fields and that these horizontal magnetic fields contribute to the considerable amount of quiet-Sun magnetic fields. We also estimate the magnetic energy flux carried by these horizontal magnetic fields based on the statistical data, and find that the total magnetic energy is comparable to the total chromospheric and coronal energy loss, implying their important role for the chromospheric heating and dynamism.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.75.3-75.3
• /
• 2017

We Investigate dust stripping of Virgo cluster galaxies that are known to suffer HI gas stripping. The gas stripping phenomena of these galaxies may result from either ram pressure induced by the hot intracluster medium or gravitational tidal interactions between galaxies. While much efforts have been made to directly detect gas removed from cluster galaxies, the spatial distributions of dust, which should also be affected, are hardly known. Several previous studies have tried to directly detect the morphology of gas or dust using radio or infrared observations, but such approaches are hard to widely apply because of the limit of observational resolution and sensitivity. In this study, we try a different approach using optical data: measuring the background galaxy reddening by the dust stripped from the Virgo cluster members. Based on optical color excess maps of the background galaxies, we compare the ambient dust distribution with the HI morphology of the Virgo galaxies. We discuss how efficiently dust stripping can be detected with this method and how the stripped dust is associated with the removed gas according to HI gas stripping stage over the sample.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.35-37
• /
• 2002

Conceptual design of the next generation PET with both high sensitivity and high spatial resolution has been performed. A detector unit using a depth encoding scheme was designed and constructed for trial. The unit consists of four Gd$_2$SiO$\sub$5/:Ce crystal blocks in a 2x2x4 array coupled to a position-sensitive photomultiplier tube having metal channel dynodes and 4x4 multi-anodes. Our proposed detector is a very reliable and simple solution suitable for volume PET devices since the proposed depth encoding scheme does not need additional photo-detectors.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.41.2-41.2
• /
• 2010

The infrared astronomy satellite AKARI/FIS (Far-Infrared Surveyor) performed all-sky survey in 4 Far-IR bands (50 - 200${\mu}m$ range). It observed around 94% of the whole sky twice or more with a higher spatial resolution and a wider wavelength coverage than that of previous all-sky mission, IRAS. The AKARI/FIS bright source catalogue ${\beta}-2$ is the second released version which included around 290,000 point sources. It provides us with more reliable position and flux information, and around 4 times larger number of sources compared with the first version of catalogue. The sensitivity limit at $90{\mu}m$ band is 0.6 Jy and the estimated flux uncertainty is 20-35% for bright sources. The catalogue will be open to public in this year after the improvement of accuracy, reliability and completeness.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.839-864
• /
• 2016

This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference between the recorded acceleration of a real damaged structure and a hypothetical damaged one. This is performed by updating physical parameters (module of elasticity in this study) in each step using iterative process of modified nonlinear conjugate gradient (M-NCG) and modified Broyden-Fletcher-Goldfarb-Shanno algorithm (M-BFGS) separately. These algorithms are based on sensitivity analysis and provide a solution for nonlinear damage detection problem. Three illustrative test examples are considered to assess the performance of the proposed method. Finally, it is demonstrated that the proposed method is satisfactory for detecting the location and ratio of structural damage in presence of noise.

• Journal of Korea Multimedia Society
• /
• v.17 no.11
• /
• pp.1279-1285
• /
• 2014

In this paper, we propose on image encryption method which uses NC(Non-linear Cycle) and 2D CAT(Two-Dimensional Cellular Automata Transform) in sequence to encrypt medical images. In terms of the methodology, we use NC to generate a pseudo noise sequence equal to the size of the original image. We then conduct an XOR operation of the generated sequence with the original image to conduct level 1 NC encryption. Then we set the proper Gateway Values to generate the 2D CAT basis functions. We multiply the generated basis functions by the altered NC encryption image to conduct the 2nd level 2D CAT encryption. Finally, we verify that the proposed method is efficient and extremely safe by conducting an analysis of the key spatial and sensitivity analysis of pixels.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1072-1080
• /
• 2000

Leakage magnetic flux (LMF) is widely used for non-contact detection of cracks. The combination of optics and LMF offers advantages such as real time inspection, elimination of electrical noise, high spatial resolution, etc. This paper describes a new nondestructive evaluation method based on an original magneto-optical inspection system, which uses a magneto-optical sensor, LMF, and an improved magnetization method. The improved magnetization method has the following characteristics: high observation sensitivity, independence of the crack orientation, and precise transcription of the geometry of a complex crack. The use of vertical magnetization enables the visualization of the length and width of a crack. The inspection system provides the images of the crack, and shows a possibility for the computation of its depth.

• Applied Microscopy
• /
• v.46 no.3
• /
• pp.127-133
• /
• 2016

Atom probe tomography is a time-of-flight mass spectrometry-based microanalysis technique based on the field evaporation of surface atoms of a tip-shaped specimen under an extremely high surface electric field. It enables three-dimensional characterization for deeper understanding of chemical nature in conductive materials at nanometer/atomic level, because of its high depth and spatial resolutions and ppm-level sensitivity. Indeed, the technique has been widely used to investigate the elemental partitioning in the complex microstructures, the segregation of solute atoms to the boundaries, interfaces, and dislocations as well as following of the evolution of precipitation staring from the early stage of cluster formation to the final stage of the equilibrium precipitates. The current review article aims at giving a comment to first atom probe users regarding the limitation of the techniques, providing a brief perspective on how we correctly interprets atom probe data for targeted applications.