• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.125-130
• /
• 2001

Experimental and analytical researches have been conducted on the twin-fluid atomizers for better droplet breakup during the past decades. But, the studies on the disintegration mechanism still present a great challenge to understand the drop behavior and breakup structure. In an effort to describe the aerodynamic behavior of the sprays issuing from the internal mixing counter-swirling nozzle, the spatial distribution of axial (U) radial (V) and tangential (W) components of droplet velocities are investigated across the radial distance at several axial locations of Z=30, 50, 80, 120 and 170mm, respectively. Experiments were conducted for the liquid flow rates which was kept constant at 7.95 g/s and the air injection pressures were varied from 20 kPa to 140 kPa. Counter-swirling internal mixing nozzles manufactured at angles of $15^{\circ},\;30^{\circ},\;45^{\circ}$ and $60^{\circ}$ the central axis with axi-symmetric tangential-drilled holes was considered. The distributions of velocities and turbulence intensities are comparatively analyzed. PDPA is installed to specify spray flows, which have been conducted along the axial downstream distance from the nozzle exit. Ten thousand of sampling data was collected at each point with time limits of 30 second. 3-D automatic traversing system is used to control the exact measurement. It is observed that the sprays with all swirl angle have the maximum SMD for on air injection pressure of 20 kPa and 140 kPa with centerline, respectively. The nozzle with swirl angle of $60^{\circ}$ has vest performance.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.2
• /
• pp.53-59
• /
• 2011

본 연구는 미국 텍사스 주의 소도시에 있는 스캇 앤 화이트 클리닉의 외부공간을 대상으로 하여 외래환자와 방문객들이 직면하는 길찾기의 문제점을 분석한다. 연구의 공간적 범위는 클리닉의 외부공간으로 한정하여 진입도로에서 진입하여 주차한 후 출입구에 도달하는 경로에서 관찰되는 행태적 특성을 분석한다. 분석의 초점은 진입도로에서 이루어지는 경로선택의 결정과 그것이 클리닉에 진입하기 위한 출입구 결정에 미치는 영향관계에 둔다. 분석은 외부공간에서의 길찾기에 관한 기존 연구문헌을 참고하여 작성한 연구모형에 의해 이루어진다. 구체적으로 보면, 이용자들이 보이는 날씨, 성별, 그리고 나이에 따른 길찾기 행태의 차이를 클리닉의 남동측 출입구와 남서측 출입구에서 발생하는 이용자들의 하차 빈도를 측정하였다. 또한 하차의 위치를 행태 지도에 기록하여 연구모델에 나타나는 상관성을 분석하였다. 길찾기 행태분석 결과를 통해 파악된 외부주차장에 주차한 후 클리닉에 접근하는 이용자들의 경로선택의 문제점과 클리닉의 입구 공간에서 하차한 이용자들의 입구선택에서 나타나는 문제점을 토대로 하여 외부공간에서 발생하는 길찾기 행위의 효율성을 증진시키기 위한 디자인 추천 사항을 다음과 같이 제시한다: (1) 시각적 단서를 제공하기 위해 남서쪽 출입구의 형태와 색채 차별화; (2) 도로에서 클리닉 진입공간에 위치한 안내판의 글자 크기 확대; (3) 학습된 길찾기 행태를 보조하기 위해 동쪽에 랜드마크 시설물 설치 및 목적 지점의 최종경관 개선; (4) 과도한 클리닉의 정보에 의해 감소되는 가독성을 고려하여 안내판의 정보 간략화; (5) 색채의 대조를 고려(출입구 벽에 설치된 클리닉의 이름이 갈색에 푸른색으로 설치되어 있어 색채의 대비가 낮아 가독성 떨어짐); (6) 클리닉 중앙 출입구의 하차 공간 상부에 설치된 캐노피 기둥의 과도한 크기에 의해 발생하는 가시공간의 감소에 의해 발생하는 하차 공간 사용의 혼잡 문제를 제거하기 위해 기둥규모 축소; (7) 하차점 6까지 캐노피를 확장하여 우천시에 발생하는 공간 사용의 문제점 제거; 그리고 (8) 올바른 하차공간 사용을 위해 진입 접근도로에 차선 설치.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.39.3-40
• /
• 2017

Ultra-diffuse galaxies (UDGs) are an unusual galaxy population. They are ghostlike galaxies with fainter surface brightness than normal dwarf galaxies, but they are as large as MW-like galaxies. The key question on UDGs is whether they are 'failed' giant galaxies or 'extended' dwarf galaxies. To answer this question, we study UDGs in massive galaxy clusters. We find an amount of UDGs in deep HST images of three Hubble Frontier Fields clusters, Abell 2744 (z=0.308), Abell S1063 (z=0.347), and Abell 370 (z=0.374). These clusters are the farthest and most massive galaxy clusters in which UDGs have been discovered until now. The color-magnitude relations show that most UDGs have old stellar population with red colors, while a few of them show bluer colors implying the existence of young stars. The stellar masses of UDGs show that they have less massive stellar components than the bright red sequence galaxies. The radial number density profiles of UDGs exhibit a drop in the central region of clusters, suggesting some of them were disrupted by strong gravitational potential. Their spatial distributions are not homogeneous, which implies UDGs are not virialized enough in the clusters. With virial masses of UDGs estimated from the fundamental manifold, most UDGs have M_200 = 10^10 - 10^11 M_Sun indicating that they are dwarf galaxies. However, a few of UDGs more massive than 10^11 M_Sun indicate that they are close to failed giant galaxies.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.2 s.32
• /
• pp.79-84
• /
• 2005

Recent researches about the accuracy assessment of the satellite sensor modeling usually focused on the quantitative analysis of errors. Quantitative error analysis contains its limitation that the distribution property of error can not be analyzed. The numerical evaluation of result of the satellite sensor modeling drop its confidence because of the absence of the distribution property of error. This study can be presented the distribution property of error to calculate RMSE and direction-coefficient of error. Moreover, Direction-coefficient which is closed to 1 s contains systematic errors. On the contrary, direction-coefficient which is closed to the zero contains random errors. To analyse the direction of errors, we will indicate that a formula is reduced the error.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.195-200
• /
• 2008

To compress the moving picture data effectively, it is needed to reduce spatial and temporal redundancy of input image data. While motion estimation! compensation methods is effectively able to reduce temporal redundancy but it is increased computation complexity because of the prediction between frames. So, the study of algorithm for computation reduction and real time processing is needed. This paper is presenting quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 at a same transfer speed, and it could decrease the frame drop effect. And the luminance signal appeared the difference of $-0.3{\sim}+0.65dB$ in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.73dB in comparision with TMN5. The proposed method reduces $30{\sim}31%$ compared with NTSS and $20{\sim}21%$ compared to 4SS in comparition of calculation quantity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.84-93
• /
• 2018

Three-dimensional (3D) numerical simulations have been carried out to study how coolant injection conditions influence the cooling efficiency and projectile ejection performance in a mixture-gas ejection system (or gas-steam launch system). The 3D single-phase computational model was verified using a 1D model constructed with reference to the previous research and then a two-phase flow computation simulating coolant injection on to hot gas was performed using a DPM (Discrete Phase Model). As a result of varying the coolant flow rate and number of injection holes, cooling efficiency was improved when the number of injection holes were increased. In addition, the change of the coalescence frequency and spatial distribution of coolant droplets caused by the injection condition variation resulted in a change of the droplet diameter, affecting the evaporation rate of coolant. The evaporation was found to be a critical factor in the design optimization of the ejection system by suppressing the pressure drop while the temperature decreases inside the breech.

• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.139-152
• /
• 2022

Steel-reinforced concrete (SRC) L-shaped column is the vertical load-bearing member with high spatial adaptability. The seismic behavior of SRC L-shaped column is complex because of their irregular cross sections. In this study, the hysteretic performance of six steel truss reinforced concrete L-shaped columns specimens under the combined loading of compression, bending, shear, and torsion was tested. There were two parameters, i.e., the moment ratio of torsion to bending (γ) and the aspect ratio (column length-to-depth ratio (φ)). The failure process, torsion-displacement hysteresis curves, and bending-displacement hysteresis curves of specimens were obtained, and the failure patterns, hysteresis curves, rigidity degradation, ductility, and energy dissipation were analyzed. The experimental research indicates that the failure mode of the specimen changes from bending failure to bending-shear failure and finally bending-torsion failure with the increase of γ. The torsion-displacement hysteresis curves were pinched in the middle, formed a slip platform, and the phenomenon of "load drop" occurred after the peak load. The bending-displacement hysteresis curves were plump, which shows that the bending capacity of the specimen is better than torsion capacity. The results show that the steel truss reinforced concrete L-shaped columns have good collapse resistance, and the ultimate interstory drift ratio more than that of the Chinese Code of Seismic Design of Building (GB50011-2014), which is sufficient. The average value of displacement ductility coefficient is larger than rotation angle ductility coefficient, indicating that the specimen has a better bending deformation resistance. The specimen that has a more regular section with a small φ has better potential to bear bending moment and torsion evenly and consume more energy under a combined action.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.185-198
• /
• 2001

This study was conducted to reveal the effects of local climatic conditions on reproductive growth in a mature stand of Korean white pine based on climatic estimates. For this, the reproductive growth such as production and characteristics of cone and seed were first measured and summarized for seven years from 1974 to 1980. The local climatic conditions in the study site were also estimated by both a topoclimatological method and a spatial statistical technique. The local climatic conditions were then correlated with and regressed on the growth factors to reveal the relationships between the climatic estimates and the reproductive growth. Average number of conelet formation per tree showed highly negative correlation with some climatic variables related to minimum temperature in the year of flower bud differentiation. Especially, the most significant negative correlation were found between average of the minimum temperature for June and July of flower bud differentiation year and the number of conelet formation. There was no significant correlation between the number of cone production and climatic variables. However, total precipitation from December of the flowering year to February of the cone production year showed the most high correlation (r=0.6036) with the number of cone production. It was found that significant climatic variables affecting the amount of cone drop and cone drop percentage were the sum of cloudy days from June of the flowering year to August of the cone production year. Positive correlation was significantly recognized between the average weight of empty seed per cone and total precipitation from December of the flowering year to February of the cone production year. For the percentage of empty seed, five climatic variables among 19 variables were significantly correlated at 10% level. The average weight of a cone showed negative correlation with total precipitation from June of the flowering year to August of the cone production year. It was also found that average weight of a seed had highly negative correlation with total precipitation from December of the flowering year to February of the cone production year. The average weight of cone coat was negatively correlated with two climatic variables derived from clear days, which are sum of clear days from November of the flowering year to March of the cone production year and sum of clear days from December of the flowering year to February of the cone production year. On the other hand, it showed positive correlation with mean temperature of May in the flowering year. The exactly same results were obtained in correlation analysis for the percentage of cone coat.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.176-184
• /
• 2011

Cold air on sloping surfaces flows down to the valley bottom in mountainous terrain at calm and clear nights. Based on the assumption that the cold air flow may be the same as the water flow, current models estimate temperature drop by regarding the cold air accumulation at a given location as the water-like free drainage. At a closed catchment whose outlet is blocked by man-made obstacles such as banks and roads, however, the water-like free drainage assumption is no longer valid because the cold air accumulates from the bottom first. We developed an empirical model to estimate quantitatively the effect of cold pool on nocturnal temperature in a closed catchment. In our model, a closed catchment is treated like a "vessel", and a digital elevation model (DEM) was used to calculate the maximum capacity of the cold pool formed in a closed catchment. We introduce a topographical variable named "shape factor", which is the ratio of the cold air accumulation potential across the whole catchment area to the maximum capacity of the cold pool to describe the relative size of temperature drop at a wider range of catchment shapes. The shape factor is then used to simulate the density profile of cold pool formed in a given catchment based on a hypsometric equation. The cold lake module was incorporated with the existing model (i.e., Chung et al., 2006), generating a new model and predicting distribution of minimum temperature over closed catchments. We applied this model to Akyang valley (i.e., a typical closed catchment of 53 $km^2$ area) in the southern skirt of Mt. Jiri National Park where 12 automated weather stations (AWS) are operational. The performance of the model was evaluated based on the feasibility of delineating the temperature pattern accurately at cold pool forming at night. Overall, the model's ability of simulating the spatial pattern of lower temperature were improved especially at the valley bottom, showing a similar pattern of the estimated temperature with that of thermal images obtained across the valley at dawn (0520 to 0600 local standard time) of 17 May 2011. Error in temperature estimation, calculated with the root mean square error using the 10 low-lying AWSs, was substantially decreased from $1.30^{\circ}C$ with the existing model to $0.71^{\circ}C$ with the new model. These results suggest the feasibility of the new method in predicting the site-specific freeze and frost warning at a closed catchment.