• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.788-794
• /
• 2005

In this paper, we focus on the potential of dual polarized antennas in mobile system. thus, this paper designs exact dual polarized channel with Spatial Channel Model (SCM) and investigates the performance for certain environment. Using proposed the channel model; we know estimates of the channel capacity as a function of cross polarization discrimination (XPD) and spatial fading correlation. It is important that the MIMO channel matrix consists of Kronecker product dividable spatial and polarized channel. Through the channel characteristics, we propose an algorithm for the adaptation of transmit antenna configuration to time varying propagation environments. The optimal active transmit antenna subset is determined with equal power allocated to the active transmit antennas, assuming no feedback information on types of the selected antennas. We first consider a heuristic decision strategy in which the optimal active transmit antenna subset and its system capacity are determined such that the transmission data rate is maximized among all possible types. This paper then proposes singular values decision procedure consisting of Kronecker product with spatial and polarize channel. This method of singular value decision, which the first channel environments is determined using singular values of spatial channel part which is made of environment parameters and distance between antennas. level of correlation. Then we will select antenna which have various polarization type. After spatial channel structure is decided, we contact polarization types which have considerable cases It is note that the proposed algorithms and analysis of dual polarized channel using SCM (Spatial Channel Model) optimize channel capacity and reduce the number of transmit antenna selection compare to heuristic method which has considerable 100 cases.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.1
• /
• pp.45-55
• /
• 2014

Purpose: The purpose of this study is to provide data on the basis for architectural planning of floor plan type and spatial composition by analysing standard mental health centers in Seoul. Methods: Data were collected through literature research, field surveys, and expert interviews to 22 standard mental health centers in Seoul. Results: The results of this study could be summarized as follows; Firstly, Mental Health Center is divided into five types according to the location. Location types of mental health center were 'Director type', 'Health center connection type', 'Public facilities connection type', 'Complex center connection type' and 'Commercial Facilities connection type'. Secondly, Depending on the type of management a mental health center is divided into two types. Types are 'Complex type' and 'Independent type'. Average area of 'Complex type' is $192.99m^2$ and 'Independent type' is $266.87m^2$. This difference affects the various spaces. Implications: It is necessary to give and architectural suggestion of mental health center in response to the proposal of the system.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.441-453
• /
• 2008

With the rapid progress of location based services, GIS, and ubiquitous computing technologies, the space that we are dealing with is no longer limited to outdoor space but being extended to indoor space. Indoor space has some differences from outdoor space, therefore to provide integrated spaces and seamless services, it is required to establish new theories, data models, and systems. For this reason, ambitious project has been launched last year to establish a theoretical background, develop a core technologies and systems, and provide services of indoor spatial awareness. In this paper, we present an overall sketch on the project and major research topics. First, we present the ISA (indoor spatial awareness) project with its goal and research topics. Second, a simplified 3D spatial model, called prism model, is proposed as a basic data types and operators of indoor spatial DBMS. Third, a indoor feature data model, developed T. Kolbe et al. who is a member of this project team, is introduced in this paper. This model provides a basis for the integration of different spaces.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.4
• /
• pp.61-75
• /
• 2010

Daily living area can be delimited differently depending on what area is to be focused. Based on regional interaction, the present study empirically analyzed the difference between living areas focusing on rural area and ones relying on urban area. We established two types of living areas in Busan-Ulsan mega city with different focus areas (rural versus urban), using travel OD data (2006). According to the result, the fonn of spatial clusters in urban living area differed from that of spatial clusters in rural area; the boundaries of living area were not fit to those of administrative areas in both types; and living areas in both types tended to extend over more than two administrative areas. The results cast some implications concerning spatial planning and policy for living area delimitation. First, since the spatial structure and interconnection of urban area differs to those of rural area, it is required to delimit living areas discriminatively depending on the objectives of the spatial plan. Additionally, the living area should be established more specifically and systematically by further subdividing the form of spaces depending on the objectives and types of the plan. Second, the administrative areas should be consolidated now that the difference of boundaries of administrative and living areas lead to inconvenience of residents, increased administration costs and scale diseconomy. Lastly, the living areas should be delimited by the metropolitan or mega city planning and thus be reflected to its offsprings.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.143-148
• /
• 2006

The goal of this paper is to analyze, through simulations and experiments, GNSS interference mitigation performance under various types of antenna structures against wideband and narrowband interferences using spatial-temporal adaptive signal processing (STAP) techniques. The STAP approach, which combines spatial and temporal processing, is a viable means of GNSS array signal processing that enhancing the desired signal quality and providing protection against interference. In this paper, we consider four types of 3D antenna array structure - Uniform Linear Array (ULA), Uniform Rectangular Array (URA), Uniform Circular Array (UCA), and the Single-Ring Cylindrical Array (SRCA) under an interference environment. Analytical evaluation and simulations are performed to investigate the system performance. This is followed by simulation GPS orbits in interfered environment are used to evaluate the STAP performance. Furthermore, experiments using a 2x2 URA hardware simulator data show that with the removal of wideband and narrowband interference through the STAP techniques, the signal tracking performance can be enhanced.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1421-1434
• /
• 2020

The frequency and intensity of heatwaves have been increasing due to climate change. Since urban areas are more severely damaged by heatwaves as they act in combination with the urban heat island phenomenon, every possible preparation for such heat threats is required. Many overseas local governments build heat maps using a variety of spatial information to prepare for and counteract heatwaves, and prepare heatwave measures suitable for each region with different spatial characteristics within a relevant city. Building a heat map is a first and important step to prepare for heatwaves. The cases of heat map construction and thermal environment analysis involve various area distributions from urban units with a large area to local units with a small area. The method of constructing a heat map varies from a method utilizing remote sensing to a method using simulation, but there is no standard for using differentiated spatial information according to spatial scale, so each researcher constructs a heat map and analyzes the thermal environment based on different methods. For the above reason, spatial information standards required for building a heat map according to the analysis scale should be established. To this end, this study examined spatial information, analysis methodology, and final findings related to Korean and oversea analysis studies of heatwaves and urban thermal environments to suggest ways to improve the utilization efficiency of spatial information used to build urban heat maps. As a result of the analysis, it was found that spatial, temporal, and spectral resolutions, as basic resolutions, are necessary to construct a heat map using remote sensing in the use of spatial information. In the use of simulations, it was found that the type of weather data and spatial resolution, which are input condition information for simulation implementation, differ according to the size of analysis target areas. Therefore, when constructing a heat map using remote sensing, spatial, spectral, and temporal resolution should be considered; and in the case of using simulations, the spatial resolution, which is an input condition for simulation implementation, and the conditions of weather information to be inputted, should be considered in advance. As a result of understanding the types of monitoring elements for heatwave analysis, 19 types of elements were identified such as land cover, urban spatial characteristics, buildings, topography, vegetation, and shadows, and it was found that there are differences in the types of the elements by spatial scale. This study is expected to help give direction to relevant studies in terms of the use of spatial information suitable for the size of target areas, and setting monitoring elements, when analyzing heatwaves.

• Journal of the Korean housing association
• /
• v.1 no.2
• /
• pp.1-11
• /
• 1990

A study of domestic furniture arrangements may reveal the living style relevant to the room as conceived and coded by occupants and the effects of the physical environment on the structure of behavior settings. The purpose of this study was to investigate, through analizing the furniture usage and behavior as a non-reactive and activity oriented behavioral measures, the occupants` domestic habits as a living style using MDS. MDS(multidimensional scaling technique) is a statistical technique for creating a spatial representation of data. It Is a particularly appropriate technique for analizing qualitative data such as the furniture usage and behavior because it takes into account all of the relationships between items. For the MDS analysis, the furniture usage and behavior examined by housing types based on 114 households in Seoul. The result of spatial configuration by MDS has three dimensions : recogn;lion of room function, pattern of room organization, understanding of room meaning. The effect of housing types for dimensions is identical but configuration of furniture items is different.

• Korean Journal of Remote Sensing
• /
• v.24 no.3
• /
• pp.251-256
• /
• 2008

Morphing method, one of classic image processing algorithms, has been used in various application fields. The motivation of this work is to investigate its applicability in consideration to geo-spatial data including airborne or space-borne images. For this purpose, the Beier and Neely morphing algorithm is tentatively implemented in the form of a prototype with user interface. As the results, this feature-based morphing with paired image sets can be used for general users: image simulation using two or more images and construction of color-blending image between source image and destination image in different types. Some simple application cases were demonstrated. This scheme is the simple and useful approach for those who want to utilize both geo-spatial data sets and airborne/space-borne image sets.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.9-17
• /
• 2015

Recently new web trends and mobile technologies are expanding and developing so fast. To improve the implementation efficiency of information systems, eGovernment standard framework has been developed and distributed. Recently, eGovernment standard framework for mobile environment was further developed. In addition, many types of public data produced by public organizations supported by government are being opened through public data portal according to Government 3.0 policy. Demands regarding web standards and common framework usages for mobile application development in most business fields dealing with any types of contents are increasing. However, to link those things to geo-spatial data or integrate those with them are an early stage in the geo-spatial application field, compared to other application fields. Based on these backgrounds, a mobile web application system was designed and implemented to present visualization functionalities of public data and geo-spatial data using HTML5 components under mobile operation environment in eGovernment standard framework in this study. It is expected that this system can be applied to develop many mobile application business models, by the further works such as application of core developing environment in eGovernment standard framework, additional functionalities, and high performance to satisfy with user requirements for a certain target application.

• Journal of Biomedical Engineering Research
• /
• v.30 no.5
• /
• pp.373-380
• /
• 2009

In general, Independent component analysis (ICA) is a statistical blind source separation technique, used either in spatial or temporal domain. The spatial or temporal ICAs are designed to extract maximally independent sources in respective domains. The underlying sources for spatiotemporal data (sequence of images) can not always be guaranteed to be independent, therefore spatial ICA extracts the maximally independent spatial sources, deteriorating the temporal sources and vice versa. For such data types, spatiotemporal ICA tries to create a balance by simultaneous optimization in both the domains. However, the spatiotemporal ICA suffers the problem of source ambiguity. Recently, constrained ICA (c-ICA) has been proposed which incorporates a priori information to extract the desired source. In this study, we have extended the c-ICA for better analysis of spatiotemporal data. The proposed algorithm, i.e., constrained spatiotemporal ICA (constrained st-ICA), tries to find the desired independent sources in spatial and temporal domains with no source ambiguity. The performance of the proposed algorithm is tested against the conventional spatial and temporal ICAs using simulated data. Furthermore, its performance for the real spatiotemporal data, functional magnetic resonance images (fMRI), is compared with the SPM (conventional fMRI data analysis tool). The functional maps obtained with the proposed algorithm reveal more activity as compared to SPM.