• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1999-2007
• /
• 2013

The key characteristics of two-lane-and-two-way traffic flow are platoon and overtaking caused by low-speed vehicle such as truck. In order to develop two-way traffic flow model comprised of CF(car-following) and overtaking model, it is essential to develop a car-following model which is suitable to two-way traffic flow. Short distance between vehicles is caused when a high-speed vehicle tailgates and overtakes foregoing low-speed vehicle on two-way road system. And a vehicle following low-speed vehicle decides to overtake the front low-speed vehicle using suitable space within the headway distribution of opposite traffic flow. For this reason, a two-way CF model should describes not only running within short gap but also headway distribution. Additionally considering domestic two-way-road size, there is a on-going need for large-network simulation, but there are few studies for two-way CF model. In this paper, a two-way CA model is developed, which explains two-way CF behavior more realistic and can be applied for large road network. The experimental results show that the developed model mimics stop-and-go phenomenon, one of features of congested traffic flow, and efficiently generates the distribution of headway. When the CF model is integrated with overtaking model, it is, therefore, expected that two-way traffic flow can be explained more realistically than before.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.73-81
• /
• 2007

The purpose of this paper is to perform a basic study on the interaction between lanes, which can be achieved through analyzing traffic breakdown at the microscopic level. Using aerial photographic data for the microscopic analysis, this study analyzed the characteristics of traffic flow at a merging area. This research produced aggregated traffic data such as flows, speeds, and densities in 30 second intervals by lane for the macroscopic analysis and individual headway data by lane for the microscopic analysis. The paper contains an analysis of lane characteristics through flows, speeds, densities, and headway variations and also investigates the influence of ramp flows on mainline flows with space-time diagrams. Firstly, the merging area in this study is divided into three sections: before-merging, during-merging, and after-merging. The transition process was analyzed at each lane. Secondly, the breakdown was observed in detail with data divided in 50-foot units. The breakdown was checked through the relationships between ramp and freeway mainline flows, various techniques were proposed to analyze the breakdown, and the formation of breakdown was introduced as three stages in this study. In the near future, the findings of this study could contribute to determining the dynamic capacity on freeways by easily understanding changeable traffic breakdown patterns over time and space.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.137-144
• /
• 2007

This study involves an analytical approach to determine transit dispatching schedules (headways) Determining a time schedule is an important process in transit system planning. In general, the transit headway should be shorter during the peak hour than at non-peak hours for demand-responsive service. It allows passengers to minimize their waiting time under inelastic, fixed demand conditions. The transit headway should be longer as operating costs increase, and shorter as demand and waiting time increase. Optimal headway depends on the amount of ridership. and each individual vehicle dispatching time depends on the distribution of the ridership. This study provides a theoretical foundation for the dispatching scheme consistent with common sense. Previous research suggested a dispatching scheme with even headway. However, according to this research, that is valid for a specific case when the demand pattern is uniform. This study is a general analysis expanding that previous research. This study suggests an easy method to set a time table without a complex and difficult calculation. Further. if the time axis is changed to the space axis instead, this study could be expanded to address the spacing problems of some facilities such as roads. stations, routes and others.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.73-82
• /
• 2022

Driver acceptance of autonomous driving is very important. The autonomous driving longitudinal controller, which is one of the factors affecting acceptability, consists of a high-level controller and a low-level controller. The host controller decides the cruise control and the space control according to the situation and creates the required target speed. The sub-controller performs control by creating an acceleration signal to follow the target speed. In this paper, we propose an algorithm to improve the inter-vehicle distance fluctuations that occur in the cruise control and space control switching problems in the host controller. The proposed method is to add an approach algorithm to the cruise control at the time of switching from cruise control to space control so that it is switched to space control at the correct switching distance. Through this, the error was improved from 12m error to 4m, and actual vehicle verification was performed.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.236-246
• /
• 2003

This paper is implemented a control algorithm in order to be stable and minimized to entire train traffic system at delayed case. Signal ing system is described wi th algebraic equations given for train headway, Discrete-event simulation principles are reviewed and a demonstration block signaling model using the technique is implemented. Train congestion at station entrance for short headway operation is demonstrated and the propagation of delays along a platform of trains from any imposed delay to the leading train is also shown. A rail way signaling system is by nature a distributed operation with event triggered at discrete intervals. Although the train kinematic variables of position, velocity, and acceleration are continually changing, the changes are triggered when the trains pass over section boundaries and arrive at signals and route switches. This paper deals with linear-mode1ing, stability and optimal control for the traffic on such metro line of the model is reconstructed in order to adapt the circuits. This paper propose optimal control laws wi th state feedback ensuring the stability of the modeled system for circuits. Simulation results show the benefit to be expected from an efficient traffic control. The main results are summarized as follows: 1. In this paper we develop a linear model describing the traffic for both loop lines, two state space equations have been analyzed. The first one is adapted to the situation where a complete nominal time schedule is available while second one is adapted when only the nominal time interval between trains is known, in both cases we show the unstability of the traffic when the proceeding train is delayed following properties, - They are easily implemented at law cost on existing lines. - They ensure the exponetial stability of loop system. 2. These control laws have been tested on a traffic simulation software taking into the non-linearites and the physical constraints on a metro line. By means of simulation, the efficiency of the proposed optimal control laws are shown.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.361-368
• /
• 2007

The storage space requirement is a very important decision variable which determines the storage capacity of a container terminal. Generally, the storage space requirement is dependent upon such factors as ship headway, allowable dwell time of containers, loading/winding time per ship, and so on. Until now, the storage space requirement is estimated under the assumption that the factors are deterministic in several studies. However, this study proposes how to estimate a storage space requirement satisfying the required service level under the assumption that a containership's load size is probabilistic. Numerical experiments, which use a simulation show that the proposed method can estimate more adequately the storage space requirement than other methods under a probabilistic environment.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2705-2710
• /
• 2011

With the rapid development of information and communication technology, CBTC system based on the wireless communication is widely applied in the railway signal system recently. CBTC system has advantages of lower installation space and maintenance fee than existing systems and the increase of transportation capacity and improvement of operating efficiency etc. due to the short headway. Based on the continuous wireless data communication between onboard and wayside equipment, CBTC system not only locates the train and transmits the information required for the train control, but also implements the moving block function by calculating the brake curves continuously according to distance from the preceding train. CBTC system can use either inductive loop (IL-CBTC) or radio frequency transmissions (RF-CBTC). In this paper, we propose RF-CBTC system architecture based on the functional modules, in which the CAN bus network is applied for the interfaces between the modules.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.165-189
• /
• 2013

The advance of the smart working environment came the expectation that it would innovate and revolutionize the way people work, particularly in a society where smart work is readily available for creating a collaborative and 'connected' business. One of the core infrastructure elements for making smart work a viable option is the smart work center, the promotion of which requires a new form of 'smart work center business model' that can satisfy the purposes of both public services and private businesses. This calls for collaboration between the public and private sectors. Recently a number of businesses have been making significant headway in the creation of a new environment for business support and collaboration by adopting a sharing economy business model in their offices. The so-called 'Coworking Space' is an advanced form of business environment in the emerging 'smart work' era, and comes with the benefits of reduced costs as a result of sharing office space and knowledge sharing through the use of human networks. This paper describes the framework of a 'smart work center business model based on the sharing economy' using a BMC (Business Model Canvas), with an understanding of the characteristics inherent to the smart work center and the sharing economy. It was on the basis of this framework that a smart work center model for business incubation and startup, a private smart work center model for childcare services, and a community marketplace model with a global network were developed.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.145-154
• /
• 2007

Determining stop spacing is a very important process in transit system planning. This study is involved in an analytical approach to decide the transit stop spacing. Transit stop spacing should be longer as 1) user access speed, 2) user travel time, and 3) dwell time increase, and shorter as 1) passengers (boardings and alightings) and 2) headway increase. In this study, a methodology is proposed to determine transit stop spacing to minimize total cost (user cost plus operator cost) with irregular passenger distribution (boardings and alightings) Without considering in-vehicle passengers, the transit stop spacing should be shorter in the concentrated sections of the passenger distribution than in others to minimize total cost. Through the conceptual analysis, it is verified that the transit stop spacing could be longer as the in-vehicle passengers increase in certain sections. This study proposes a simple practical method to determine transit stop spacing and locations instead of a dynamic programming method which generally includes a complex and difficult calculation. If the space axis is changed to a time axis. the methodology of this study could be expanded to analyze a solution for the transit service (or headway) schedule problem.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.208-221
• /
• 2020

The objective of this study is to estimate and analyze the traffic density of continuous flow using the trajectory of individual vehicles and the headway of sample probe vehicles-front vehicles obtained from ADAS (Advanced Driver Assitance System) installed in sample probe vehicles. In the past, traffic density of continuous traffic flow was mainly estimated by processing data such as traffic volume, speed, and share collected from Vehicle Detection System, or by counting the number of vehicles directly using video information such as CCTV. This method showed the limitation of spatial limitations in estimating traffic density, and low reliability of estimation in the event of traffic congestion. To overcome the limitations of prior research, In this study, individual vehicle trajectory data and vehicle headway information collected from ADAS are used to detect the space on the road and to estimate the spatiotemporal traffic density using the Generalized Density formula. As a result, an analysis of the accuracy of the traffic density estimates according to the sampling rate of ADAS vehicles showed that the expected sampling rate of 30% was approximately 90% consistent with the actual traffic density. This study contribute to efficient traffic operation management by estimating reliable traffic density in road situations where ADAS and autonomous vehicles are mixed.