• Tuberculosis and Respiratory Diseases
• /
• 제45권2호
• /
• pp.301-310
• /
• 1998

연구배경: 결핵성 흉막염은 면학적으로 흉강내에 국소적으로 활성화된 CD4+ T림프구와 대식세포가 관여하는 세포매개면역이 중요한 역할을 하며 이들의 상호작용은 다양한 사이토카인에 의해 좌우된다고 알려져 있다. 특히 helper T cell type 1 (Th1) 사이토카인인 IL-12 및 IFN-$\gamma$와 Th2 사이토카인인 IL-4 및 IL-10간의 균형이 세포매개반응의 정도를 결정한다고 생각되고 있다. 본 연구는 세포매개면역반응의 지표로서 Th1 사이토카인인 IL-12, IFN-$\gamma$와 이들과 길항적으로 작용한다고 알려져있는 Th2 사이토카인 중 IL-10이 결핵성 흉수내에 어떻게 표현되는지를 검사하여 대조군인 악성 흉수와 비교함으로써 결핵성 흉막염의 변역학적 기전을 이해하는데 도움이 되고자 하였으며 아울러 사이토카인의 진단적 유용성을 알아보고자 하였다. 방 법: 각 20명의 결핵성 흉막염과 악성 흉막염 환자를 대상으로 흉수와 혈장에서 IL-10, IL-12, IFN-$\gamma$를 측정하고 흉수에서의 ADA를 측정하여 비교하였다. 사이토카인은 대상환자의 혈액과 흉수를 원심분리하여 얻은 상층액을 ELISA 방법으로 측정하였고 ADA 활성도는 비색법으로 측정하였다. 결 과: 결핵성 흉막염 환자에서 흉수의 IL-10, IL-12, IFN-$\gamma$의 농도는 $121.3{\pm}83.7$ pg/mL, $571.4{\pm}472.7$ pg/mL, $420.4{\pm}285.9$ pg/mL로 혈장의 $21.2{\pm}60.9$ pg/mL, $194.5{\pm}67.6$ pg/mL, $30.1{\pm}18.3$ pg/mL 보다 모두 유의하게 높았다 (p<0.01). 악성 흉막염 환자에서 흉수의 IL-10, IL-12, IFN-$\gamma$의 농도는 $88.4{\pm}40.4$ pg/mL, $306.5{\pm}271.1$ pg/mL, $30.5{\pm}54.8$ pg/mL로 혈장의 $43.4 {\pm}67.2$ pg/mL, $206.8{\pm}160.6$ pg/mL, $14.6{\pm}3.3$ pg/mL와 비교하였을때 IL-10 만이 유의하게 높았고 (p<0.001) IL12, IFN-$\gamma$에선 유의한 차이가 없었다. 결핵성 흉막염과 악성 흉막염 환자의 흉수에서의 농도를 비교하였을 때 IL-12, IFN-$\gamma$, ADA는 결핵성 흉막염에서 유의하게 높았으나 (p=0.046, <0.001, <0.001) IL-10은 유의한 차이가 없었다. 결핵성 흉수염을 악성 흉수염과 감별하는데 있어 IL-12, IFN-$\gamma$, ADA의 기준을 각각 300 pg/mL, 100 pg/mL, 45 U/L으로 하였을때 민감도/특이도는 IL-12에서 60%/70%, IFN-$\gamma$에서 90%/85%, ADA 에서 85%/90%였다. 결 론: 결핵성 흉수에서 흉강내에 Th1 사이토카인인 IL-12, IFN-$\gamma$와 함께 IL-10이 증가되어 있었고 악성흉수와 비교했을때 IL-12, IFN-$\gamma$는 유의하게 증가되어 있었으나 IL-10은 의의가 없었다. 따라서 결핵성 흉막염의 면역기전에 Th1 경로의 세포매개변역반응이 주로 관여함을 확인할 수 있었고 국소적인 IL-10 증가의 임상적 의의는 추후의 연구가 필요할 것으로 생각된다. 또한 IFN-$\gamma$와 ADA는 결핵성 흉수와 악성 흉수와의 감별에 유용한 진단법으로 생각된다.

• 대한화학회지
• /
• 제40권6호
• /
• pp.427-435
• /
• 1996

$Ca^{2+}$ 이온과 $Cs^+$ 이온으로 치환되고 완전히 탈수된 제올라이트 X, $Ca_{35}Cs_{22}Si_{100}Al_{92}O_{384}$($Ca_{35}Cs_{22}$-X; a=25.071(1) $\AA)와Ca_{29}Cs_{34}Si_{100}Al_{92}O_{384}$($Ca_{29}Cs_{34}$-X; a=24.949(1) $\AA)$의 두 개의 결정 구조를 $21^{\circ}C$에서 입방공간군 Fd3을 사용하여 단결정 X-선 회절법으로 해석하고 구조를 정밀화하였다. 탈수한 $Ca_{35}Cs_{22}$-X의 구조를 Full-matrix 최소자승법 정밀화 계산에서 $I>3\sigma(I)$인 322개의 독립 반사를 사용하여 최종 오차 인자를 $R_1$=0.051, $R_2$=0.044까지 정밀화 계산하였고, 탈수한 $Ca_{35}Cs_{22}$-X의 구조는 260개의 독립 반사를 사용하여 $R_1$=0.058, $R_2$=0.055까지 정밀화시켰다. 이들 구조에서 $Ca^{2+}$ 이온과 $Cs^+$ 이온은 서로 다른 5개의 결정학적 자리에 위치하고 있다. 탈수한 $Ca_{35}Cs_{22}$-X 구조에서는 16개의 $Ca^{2+}$ 이온은 D6R의 중심, 자리 I에 모두 채워져 있다(Ca-O=2.41(1) $\AA$, $O-Ca-O=93.4(3)^{\circ}).$ 다른 19개의 $Ca^{2+}$ 이온은 자리 II에 (Ca-O=2.29(1) $\AA$, $O-Ca-O=118.7(4)^{\circ})$, 10개의 $Cs^+$ 이온은 큰 공동에서 6-링 맞은편 II에 채워져 있고, 각각 3개의 산소로 만들어지는 산소 평면으로부터 $1.95\AA$ 들어가 위치하고 $있다(Cs-O=2.99(1)\AA$, $O-Cs-O=82.3(3)^{\circ}).$ 3개의 $Cs^+$ 이온은 산소 평면에서 소다라이트 공동쪽으로 $2.27\AA$ 들어간 자리 II'에서 위치하고 $있다(Cs-O=3.23\AA$, $O-Cs-O=75.2(3)^{\circ}).$ 나머지 9개의 $Cs^+$ 이온은 각각 큰 공동내 2회 회전축을 가지고 있는 48(f) 위치인 자리 III에 통계학적으로 분포하고 $있다(Cs-O=3.25(1)\AA$, Cs-O=3.49(1) $\AA).$ 탈수한 $Ca_{29}Cs_{34}$-X에서 16개의 $Ca^{2+}$ 이온은 자리 I에 채워지고 (Ca-O=2.38(1) $\AA$, $O-Ca-O=94.1(4)^{\circ})$ 13개의 $Ca^{2+}$ 이온은 자리 II에 채워져 있다(Ca-O=2.32(2) $\AA$, $O-Ca-O=119.7(6)^{\circ}).$ 다른 12개의 $Cs^+$ 이온은 자리 II에 채워져 있고, 이들은 산소 평면으로부터 각각 $1.93\AA$ 들어가 위치하고 $있다(Cs-O=3.02(1)\AA$, $O-Cs-O=83.1(4)^{\circ}).$ 7개의 $Cs^+$ 이온은 각각 자리 II'에 위치하고 있고, 산소 평면으로부터 소다라이트 공동으로 $2.22\AA$ 들어가 위치하고 있다(Cs-O=3.21(2) $\AA$, $O-Cs-O=77.2(4)^{\circ}).$ 나머지 16개의 $Cs^+$ 이온은 큰 공동내의 자리 III에 있다(Cs-O=3.11(1) $\AA$, Cs-O=3.46(2) $\AA).Ca^{2+}$ 이온은 자리 I과 자리 II에 우선적으로 위치하고 $Cs^+$ 이온은 너무 커서 자리 I에 채워질 수 없으며 나머지 자리에 채워진다.

• 헤리티지:역사와 과학
• /
• 제45권3호
• /
• pp.60-79
• /
• 2012

고대 중국 불교사원이 있는 환경은 향촌(鄕村), 명산(名山), 도시(都市) 세개의 유형으로 나눌 수 있다. 이는 또한 사원이 존재하는 환경의 차이를 만들며 이로써 불교의 발전에 영향을 미쳤고 또한 사원과 사회관계의 다른 유형을 만들었다. 본고는 향촌 사회가 사원과 승려뿐 아니라 불교의 존재와 발전에 가져온 각종 이해(利害)에 대해 설명한다. 사원이 사회구조 속에서 다른 환경적 위치, 즉 도시와 향촌에 놓였을 때 그들은 결국 다른 외재적(外在的) 내재적(內在的) 사회적 응성을 발생시킬 수 밖에 없다. 중국 고대 불교사원은 위에 말한바와 같이 향촌, 명산, 도시에 위치하고 있으나 동진십육국 이후 사원이 크게 늘고 명산이 사원과 승려의 집중지가 됨에 따라 명산과 도시의 사원은 비슷한 양상을 띠며 발전한다. 그러나 향촌의 사원은 이와는 좀 다른 영향을 받고, 비쳤으므로 그를 중심으로 서술하고자 한다. 향촌 지역의 사원과 승려들이 서로 미치는 영향은 크게 네가지가 있다. 첫째, 향촌의 승려들은 그 지역, 혹은 그 부근으로부터 왔기 때문에 사회와 비교적 친밀한 관계를 형성한다. 그러므로 향촌 지역의 세력은 사원 승려집단이 구성하는 영향력을 제한한다. 둘째, 향촌 사원은 지방경제에 의탁하며 서로 동고동락 하였다. 향촌의 사원은 그 사회의 공공장소가 되었고 종종 시장 소재지가 되기도 하였다. 사실 사찰의 축조와 존재는 원래 지역 경제에 있어 하나의 추동력이 되었다. 왜냐하면 사찰건물 축조에는 공장(工匠)과 재료가 필요하며 어떤 절은 향객(香客)과 향촉(香燭) 소비 등에서 모두 많게든 적게든 상품 경제를 대동하기 때문이다. 그리고 소재 향촌이 어떤 자연재해 혹은 인재를 만나거나 수확이 좋지 않거나 경제가 불황일 때는 승려들이 흩어져 사원 또한 존속할 수 없는 결과를 낳기도 하였다. 셋째, 향촌 사원과 신도들의 관계는 도시와 명산의 사원과 구별된다. 왜냐하면 중국에서 사원은 승려들이 수행하는 장소일뿐 아니라 일반 가신도(家信徒)들이 조배(朝拜)하는 장소이기 때문에 그 주위엔 항상 많은 신도 무리가 있었기 때문이다. 넷째, 향촌 불교와 지방 민간신앙의 결합은 꽤 큰 정도로 불교의 민간화를 주도하였다. 이것은 하나의 상호작용 과정이다. 불교가 가지고 있는 전국성(全國性) 종교로서의 우세(優勢) 때문에 종종 지방특색을 가지고 있는 숭배는 불교 신앙으로 바뀌거나 불교 적색채에 물들었다. 향촌의 사원은 현지 사회와 밀접한 관계를 유지하면서 지방의 영향을 받음과 동시에 또 영향을 주기도 하였다. 대표적으로 향촌에서 비교적 문화가 발달된 곳으로서의 각종 문화와 관련된 시설 - 예를들어 학교, 병원 등 - 의 역할을 대신하여 모범 행동을 보이기도 하였다. 사찰이 향촌의 장례(葬禮)에 미친 영향도 매우 컸다. 중국인의 분묘(墳墓)는 주로 향촌에 세워졌는데 도시에 사는 사람이더라도 죽은 후에는 본적(本籍)으로 돌아와 묻히거나 적어도 도시가 아닌 교외(郊外)에 묻혔다. 향촌의 사찰은 일반적으로 장사 치르는 일에 참여하였다. 이상은 대다수의 유명한 불교 사찰은 명산에 있는것이 아니라 도시에 있음에도 불구하고 사원의 다수는 오히려 광대한 향촌에 있으며 그들은 향촌 사회와의 상호 융합을 통하여 90%이상의 중국 민중과 연결되어 있으며 불교가 중국에서 가장 중요하게 존재하는 기초가 되었음을 표명한다. 향촌 사원과 현지 사회 민중간의 상호 영향은 전방위(全方位)적인 것이며, 많게 혹은 적게 사회 생활 각 방면에 파급되었다. 향촌 지역에 이렇듯 사묘(寺廟)가 시(時) 공간(空簡)적으로 광범위하게 분포해 있는 것은 불교 사원과 중국 고대 농촌 사회의 긴밀한 결합을 설명하기에 족하다.

• 한국엔터테인먼트산업학회논문지
• /
• 제15권8호
• /
• pp.19-31
• /
• 2021

본 연구는 기존 문헌연구들을 중심으로 엔터테인먼트 산업 분야의 대학생 창업의도 특성들을 파악하고자 하였다. 이를 바탕으로 대학 창업담당 관계자들과 국가 창업지원 정책 담당자들에게 대학생 창업을 위한 현실적인 교육 대안 및 창업 경영에 관한 시사점을 제시하고자 하였다. 따라서 본 연구의 시사점은 다음과 같다. 첫째, 엔터테인먼트 산업에 필수적인 요소인 아이디어 창출 교육을 위한 기술(아이템) 아이디어와 제품으로의 연결 방법, 컨텐츠 가치를 높일 수 있는 기술 방법, 엔터테인먼트 산업 내 사용자 특성 교육을 지속적으로 해야 할 것이다. 또한 아이디어 교육과 함께 자금조달, 인적자원관리, 마케팅, 운영관리 등 창업 경영관리에 대한 이해도를 높이고, 나아가 엔터테인먼트 창업에 대한 성공가능성 및 새로운 일에 대한 모험심이 생길 수 있도록 자신감 교육도 함께 이루어져야 할 것이다. 둘째, 창업에 관심이 있는 학생 의견조사를 중심으로 창업에 필요한 공간 및 장비제공(동아리실, 학생창업실, 엔터테인먼트관련 장비확보 등)이 이루어져야 하고, 학생 창업을 위한 대학 및 정부의 각종 규제들을 완화해야 할 것이다. 또한 학내 외 창업 지식형성을 위한 교육과 전문가 특강 및 자문, 현장 교육 등을 통해 보다 실용적인 창업 지식이 만들어질 수 있도록 노력해야 하고, 다양한 지원들을 바탕으로 학생들의 창업에 대한 자신감도 형성할 수 있도록 만들어 주어야 할 것이다. 셋째, 엔터테인먼트 산업에 대한 창업을 희망하는 학생들에게는 가족들에게 엔터테인먼트 산업에 대한 현장 상황을 정확히 알려줌으로써 자녀들이 창업분야를 선택하는데 있어 부정적인 인식보다는 긍정적인 인식이 발생할 수 있도록 적극 알릴 필요가 있다. 또한 대학생들이 창업 후 성공한 다양한 사례들을 가족들에게 홍보함으로써 자녀가 창업에 대한 도전정신이 발생할 수 있도록 가족들이 힘을 보태게 해야 할 것이다. 넷째, 엔터테인먼트 산업 분야 쪽으로 창업을 희망하는 친구들과의 지속적인 동호회나 모임들이 형성 될 수 있도록 만들어 주어야 하고, 나아가 이런 모임을 통해 실제로 창업한 친구들의 의견을 청취하는 기회도 마련해야 할 것이다. 또한 모임과 친구 형성으로 인해 사업계획서 작성, 창업 성공 방법, 창업 경영관리에 대한 논의의 자리가 형성되도록 만들어 주어야 하고, 서로 창업에 대한 의지가 발생할 수 있도록 심리적 자극활동도 이루어져야 할 것이다. 다섯째, 창업과 관련한 다양한 지식(자금 확보 방안, 창업조직 관리, 창업하고자 하는 시장에 대한 정보 파악 등)들이 배양될 수 있도록 노력해야 할 것이고, 자신들이 창업하고자 하는 다양한 엔터테인먼트 산업 분야에 대한 사업계획서 작성 방법도 실무에 맞도록 학습 시켜야 할 것이다. 또한 이런 지식 형성을 밑바탕으로 학생들 스스로가 창업에서 발생할 수 있는 위험과 변화에 대응할 수 있도록 만들어 주어야 할 것이다. 마지막으로 창업 경영관리에 대한 이해도를 높여 주어야 하고, 창업에 대한 자신감과 두려움이 사라지게 할 수 있는 다양한 심리적 자극 활동이 필요하다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 유통과학연구
• /
• 제10권3호
• /
• pp.51-61
• /
• 2012

본 연구는 커피 시장에 대한 시장 규모가 커지고 점차 확대되고 있는 대형 브랜드 커피전문점을 중심으로 점포선택 속성(가격, 종업원서비스, 점포의 입지, 점포 분위기)을 4가지로 규정하여, 그 선택속성들과 커피전문점 이용자의 특성이 어떠한 관계가 있는 가를 알아보자 하였으며, 또한 커피전문점의 브랜드 태도에는 어떠한 영향을 미치는 바를 조사하였다. 그 결과 이용자의 특성에 따라 차이가 났지만 점포선택속성 중 점포의 분위기와 점포입지가 점포선택 속성에 가장 큰 영향을 미치는 것으로 나타났다. 따라서 이러한 결과를 토대로 본 연구는 커피전문점이 충성고객을 확보하기 위해 어떠한 속성에 중점을 두어야 하며 아울러 소비자의 욕구에 부합되는 선택 속성을 연구하고자 한다. 특히, 유통학문의 연구방법론은 크게 2가지로 규범적 연구방법론, 실증적 연구방법론(경험적 분석기법, 통계적 분석기법)이 있는데, 이중에 본 연구는 실증적 연구방법론중에서 통계적 분석기법을 활용한다. 본 연구의 한계점으로는 첫째, 응답자의 분포가 수도권에 편중되어 있다는 것이다. 본 연구에 이용된 2차 자료를 보면 서울지역의 응답자 수는 경기도 지역에 비해 압도적으로 많았고 경기도 지역의 응답자 수 또한 6대 광역시에 비해 압도적으로 많았다. 따라서 지역 표본이 해당 지역의 모집단을 대표하는데 어느 정도의 한계가 있다고 판단된다. 둘째, 응답자의 비율을 측정척도로 사용한 점이다. 본 연구에서 점포선택속성에 대한 지각정도와 브랜드 선호도를 측정함에 있어서 응답자의 비율을 척도로 사용하였는데 이를 통해 점포선택속성과 브랜드 선호도 간의 관계, 집단 간 차이를 비교적 정확하게 규명하기에는 한계가 따른다. 따라서 향후 연구에서는 위의 한계점을 보완하고 다음과 같은 추가적인 연구가 필요할 것이라 판단된다. 커피전문점들이 점차 지방으로 확대되어 가고 있는 추세에 비추어 볼 때, 6대 광역시 뿐만 아니라 지방 소도시의 소비자들까지 포함하여 설문조사를 실행하여 1차 자료를 수집하는 것이다. 특히 설문조사에서 관련된 변수들을 리커트 척도로 측정하되 점포선택속성에 대한 지각정도, 브랜드 선호도 외에도 재 구매의도까지 포함시킬 수 있다. 따라서 상관관계분석, 다중회귀분석, 분산분석 등을 통해 더욱 정교한 실증분석을 실행하여 소비자의 태도와 행동에 대한 보다 세밀한 분석결과를 도출해야 할 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.