• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.41-45
• /
• 2007

Multi-input multi-output (MIMO) system can increase data rate, capacity and bit error rate (BER) performance compare to traditional single antenna system. However MIMO technique is pointed out the problem that has high complexity to design receiver. So a recent trend of research on the MIMO system pays more attention to simplified implementation of receiver structure. In this paper, we propose differential space time block code (STBC) for MIMO system with cyclic delay diversity (CDD). This structure can provide a very close performance to that of the conventional diversity scheme with maximum likelihood (ML) detection without channel estimation block while the receiver structure is highly simplified. Bit error rate (BER) performance of the proposed system is simulated for an AWGN channel by theoretical and simulated approaches. The results of this paper can be applicable to the 4G mobile multimedia communication systems.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.615-621
• /
• 2015

In this paper diamond wire cutting method has been proposed to cut the rock in the tunnel face. Diamond wire saw method could cut the rock from tunnel face with very minor vibration and noise. In this study rock cutting process has been simulated with FEM method by using LS-DYNA explicit non-linear finite element code. Normal load act as an prime factor when cutting the rock surface. For observing the effect of normal load on bead, several experiments has been conducted by varying normal loads on the bead. From each experiment, cutting rate has been calculated to compare the cutting rate with different load conditions. By increasing the normal load on bead, cutting rate increases drastically.

• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.3-13
• /
• 1994

간섭과 레일리 페이딩이 함께 존재하는 환경하에서 FH/MFSK 신호의 오류 확률식을 유도하고 유도한 식에 의해 수치 계산 한 결고를 그래프로 나타내고 분석하였다. 선택 합성법고 최대비 합성법의 공간 다이버시티 기법의 채용에 따른 오류 확률의 개선 정도를 알아내었다. 분석 결고 최대비 합성법이 레일리 페이딩과 감섭에 대해 매우 효과적이라는 것을 알 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.55-60
• /
• 1999

A centrifugal compressor was tested with three different diffusers with plate vanes. The vane inlet angle was varied from 15 to 30 dog. The higher static pressure rises are obtained with lower vane stagger angle. In the stable region the static pressure field in vaneless space is very sensitive to flow rate. The impeller has a stabilizing effect over the whole stable operating range. The diffuser has a stabilizing effect at high flow rate but is destabilizing at low flow rate.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.1-8
• /
• 2002

A numerical analysis was performed on the fluid flow in injector orifice of a liquid rocket engine. The present computational code was verified against the published data for turbulent flow in a pipe with a sudden expansion-contraction. Considered were the parameters for the flow analysis in an injector orifice: Reynolds number, ratio of mass flow rate of the injector orifice and inlet flow rate, and slant angle of the injector orifice. The discharge coefficient increased slightly as the Reynolds number increased. The slant angle of the injector changed critically the discharge coefficient. The discharge coefficient increased by 7% when the slant angle changed from $-30^{\circ}$ to $30^{\circ}$ The ratio of mass flow rate had relatively little impact on the discharge coefficient.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.32-35
• /
• 2004

In this paper, we propose two novel high-rate high-performance space-time codes for multiple-input multiple-output (MIMO) systems. When $n_{T}$ transmit antennas and $n_{R}$ = $n_{T}$ receive antennas are deployed, the two proposed codes respectively offer transmission rates of ( $n_{T}$ -I) and ( $n_{T}$ - 2) symbols per channel use and diversity orders of 3 and 5. As a consequence, our proposed codes allow the MIMO systems to employ a simple detection technique based on QR decomposition. Moreover, for equal or even higher spectral efficiencies, our proposed codes always provide much better bit error rate (BER) performances than V-BLAST architecture does when $n_{R}$ = $n_{T}$. Computer simulation is given to verify performances of our proposed codes.sed codes.des.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.111-112
• /
• 2020

In the case of, the ignition of flammable external materials by the radiant flame and the accompanying fire in the upper layer are occurring every year, and in the case of the Flashover prediction formula, the limit is reached through the surface area of the space and the factor. Predicts heat release rate. In this study, the critical heat release rate of each prediction formula was calculated based on the ISO 9705 model.

• 한국터널지하공간학회 논문집
• /
• 제16권4호
• /
• pp.417-430
• /
• 2014

도심지 내 지하공간의 효율적인 활용을 위해서 연마재 워터젯 시스템(abrasive waterjet system)을 이용한 새로운 형태의 암반굴착 공법이 개발되어 활용 중에 있다. 연마재 워터젯 시스템을 활용한 굴착(절삭) 수행 시 적정량의 연마재를 투입하고 연마재입자의 유동성을 원활하게 유지하는 것은 매우 중요하다. 본 연구에서는 실내실험을 통해 연마재 입자의 유동성과 관련된 영향인자들을 연마재 관 설치높이, 연마재 관 길이, 연마재 관 굴곡도 그리고 연마재 관 내경으로 나누어 연마재 투입량 및 유동성 수준을 평가하였다. 또한, 실험결과를 바탕으로 연마재 투입량 및 연마재 입자 유동성에 관한 최적 조건을 제시하였다. 본 연구결과를 바탕으로 향후 암반 굴착용 워터젯 공법이 도심지 내 터널, 공동구, 수직구 건설 등 다양한 지반 구조물 굴착 작업 시, 최적 연마재 투입을 위한 기초자료로 유용하게 활용될 수 있을 것으로 기대된다.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.42-46
• /
• 2006

SDINS 운항중 정렬에 적용 가능한 GPS 반송파 위상변화율 측정 모델을 유도하여 새로운 SDINS/GPS 복합항법 시스템 구성 방법을 제안한다. 제안된 SDINS/GPS 복합항법 필터의 성능 분석을 공분산 해석기법을 이용하여 수행하고 이의 결과를 실제 차량 실험을 통하여 검증한다. 제안된 결합기법은 2개 이상의 안테나를 갖는 SDINS/GPS 결합시스템에 적용가능하며 기수각 추정에 직접적으로 연계된 GPS 측정치를 생성함으로써 빠른 SDINS의 기수각 추정을 가능하게 함으로써 SDINS/GPS의 항법 성능을 향상시키게 된다.

• 천문학회보
• /
• 제44권1호
• /
• pp.48.2-48.2
• /
• 2019

Tidal disruption events (TDEs) provide evidence for quiescent supermassive black holes (SMBHs) in the centers of inactive galaxies. TDEs occur when a star on a parabolic orbit approaches close enough to a SMBH to be disrupted by the tidal force of the SMBH. The subsequent super-Eddington accretion of stellar debris falling back to the SMBH produces a characteristic flare lasting several months. It is theoretically expected that the bolometric light curve decays with time as proportional to $t^{-5/3}$. However, some of the observed X-ray light curves deviate from the $t^{-5/3}$ decay rate, while some of them are overall in good agreement with the $t^{-5/3}$ law. Therefore, it is required to construct the theoretical model for explaining these light curve variations consistently. In this paper, we revisit the mass fallback rates semi-analytically by taking account of the stellar internal structure, orbital eccentricity and penetration factor. We find that the mass fallback rate is shallower than the standard $t^{-5/3}$ decay rate independently of the polytropic index, and the orbital eccentricity only changes the magnitude of the mass fallback rate. Furthermore, the penetration factor significantly can modify the magnitude and variation of mass fallback rate. We confirm these results by performing the computational hydrodynamic simulations. We also discuss the relevance of our model by comparing these results with the observed light curves.