• 천문학회보
• /
• 제34권1호
• /
• pp.118.1-118.1
• /
• 2009

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.787-797
• /
• 2011

The noise in a vehicle is an important factor for customers purchasing a car. Particularly, reduction of the noise that is generated from HVAC(heating, ventilation and air conditioning) is very important since it has considerable effects on interior noise. In general, identification of noise source is crucial to reduce noise level. The complex acoustic intensity method is widely used to obtain the accurate measurement and identification of noise source. Therefore, in the previous study, noise source of HVAC was identified through experimental approach using the complex acoustic intensity method. In this study, we are intended to confirm reduced level of noise by comparing the result between before and after modification of cam curve that is based on identified noise source of HVAC. It is found out that noise source of HVAC are motor and cam area using the complex acoustic intensity method in the previous study. We performed experiments to compare noise level between before and after modification of cam curve. Especially, it can be seen that complex acoustic intensity method using both active and reactive intensity is vital in devising a strategy for comparison to noise level. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.162-169
• /
• 2012

Our country set the mid-term reduction goal of greenhouse gases up to 2020 in accordance with Bali roadmap agreed in 2007 through the negotiation with UNFCCC in 2009 and specified the proper goal as by the Basic Act on Green Growth that went into effect at April, 2010. First of all the enlargement of green building construction has been suggested as a worldwide strategy to achieve the green house gas reduction. Building area is one of most important sectors for the countermeasure of climate change agreement and the achievement of national green house gas reduction goal and the need to reduce its green house gases has been increased accordingly. The objective of the study is to examine the status and characterization of mass energy consumption local governmental buildings' green house gas emissions depending on usage (hotel, school, apartment, hospital) through the green house gas emission source unit analysis. The result indicated that the energy source unit was proportional to green house gas source unit and hotel showed the highest green house gas emission source unit per open area of construction unit, followed by hospital, apartment, and then school. In case of apartment, green house gas emission source unit per open area of construction unit decreased as year went on. Meanwhile school building showed a striking increase in the annual energy source unit.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.47-57
• /
• 2013

This study is to assess the reduction of non-point source pollution loads for rice straw mulching of upland crop cultivation at a watershed scale. For Byulmi-cheon watershed (1.21 $km^2$) located in the upstream of Gyeongan-cheon, the HSPF (Hydrological Simulation Program-Fortran) and SWAT (Soil and Water Assesment Tool), physically based distributed hydrological models were applied. Before evaluation, the model was calibrated and validated using 9 rainfall events. The Nash-Sutcliffe model efficiency (NSE) for streamflow using the HSPF was 0.62~0.76 and the determination coefficient ($R^2$) for water quality (sediment, total nitrogen T-N, and total phosphorus T-P) were 0.72, 0.62, and 0.63 respectively. The NSE for streamflow using the SWAT were 0.43~0.81 and the $R^2$ for water quality (sediment, T-N, and T-P) were 0.54, 0.87, and 0.64 respectively. From the field experiment of 16 rainfall events, the rice straw cover condition reduced surface runoff average 10.0 % compared to normal surface condition. By handling infiltration capacity (INFILT) in HSPF model, the value of 16.0 mm/hr was found to reduce about 10.0 % reduction of surface runoff. For this condition, the reduction effect of sediment, T-N, and T-P loads were 87.2, 28.5, and 85.1 % respectively. By handling soil hydraulic conductivity (SOL_K) in SWAT model, the value of 111.2 mm/hr was found to reduce about 10.0 point reduction of surface runoff. For this condition, the reduction effect of sediment, T-N, and T-P loads were 80.0, 83.2, and 78.7 % respectively. The rice straw surface covering was effective for removing surface runoff dependent loads such as sediment and T-P.

• 한국물환경학회지
• /
• 제32권1호
• /
• pp.108-114
• /
• 2016

Sediment-laden water leads to water quality degradation in streams; therefore, best management practices must be implemented in the source area to control nonpoint source pollution. Field monitoring was implemented to measure precipitation, direct runoff, and sediment concentrations at a control plot and straw-applied plot to examine the effect on sediment reduction in this study. A hydrology model, which employs Curve Number (CN) to estimate direct runoff and the Universal Soil Loss Equation to estimate soil loss, was selected. Twenty-five storm events from October 2010 to July 2012 were observed at the control plot, and 14 storm events from April 2011 to July 2011 at the straw-applied plot. CN was calibrated for direct runoff, and the Nash-Sutcliffe efficiency and coefficient of determination were 0.66 and 0.68 at the control plot. Direct runoff at the straw-applied plot was calibrated using the percentage direct runoff reduction. The estimated reduction in sediment load by direct runoff reduction calibration alone was acceptable. Therefore, direct runoff-sediment load behaviors in a hydrology model should be considered to estimate sediment load and the reduction thereof.

• 한국농공학회논문집
• /
• 제60권5호
• /
• pp.17-27
• /
• 2018

The objective of this study is to identify the priority area where the nonpoint source pollution (NPS) management is required and to set up the load reduction goals for the identified priority area. In this study, the load duration curve (LDC) was first developed using the flow and water quality data observed at 286 monitoring stations. Based on the developed LDC, the priority area for the NPS pollution management was determined using a three-step method. The 24 watersheds were finally identified as the priority areas for the NPS pollution management. The water quality parameters of concern in the priority areas were the total phosphorus or chemical oxygen demand. The load reduction goals, which were calculated as the percent reduction from current loading levels needed to meet target water quality, ranged from 67.9% to 97.2% during high flows and from 40.3% to 69.5% during moist conditions, respectively. The results from this study will help to identify critical watersheds for NPS program planning purposes. In addition, the process used in this study can be effectively applied to identify the pollutant of concern as well as the load reduction target.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.580-586
• /
• 2011

Low impact development (LID) technique is recently proposed as new concept to reduce surface runoff and pollutant loading with various best management practices (BMPs). In this study, LIDMOD2, which is one of the model to evaluate LID, was applied at Mohyeon developing area to evaluate the redcution of annual runoff and pollution loading, cost-reduction efficient by LID with design of structural BMPs including bioretention, wet pond, and wetland. As a simulation results, the bioretention had the highest reduction efficiency for runoff (41.43%), and 22% for T-N and 22% for BOD. Wet pont had the highest reduction efficiency for T-P as showing 25% of reduction rate. As a results of cost-reduction efficient, wet pont represented the highest cost-effective for T-N and BOD with showing 0.43 T-P kg/million won and 17.37 BOD kg/million won, respectively, and bioretention represented the highest cost-effective for T-P with showing 2.52 T-P kg/million won. LID technology could reduce effectively surface runoff and nonpoint source pollution and construct sustainable development. LIDMOD2 could be suggested as useful tool to evaluate and design LID.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.121-128
• /
• 2006

헬리콥터를 이용한 항공자력탐사는 정해진 고도를 따라 지표면에 평행하게 이루어지지만, 고해상도 탐사에서는 특히 측정이 이루어지는 고도가 너무 변화하여 평탄면으로 간주할 수 없는 경우가 있다. 이 연구에서는 모서리 효과를 조절할 수 있도록 주변 자력원이 포함되는 등가원 방법을 이용하여 이러한 자료를 변환하는 방법을 개발하였고, 3차원적으로 무작위하게 분포하는 점의 자료를 직접적으로 모델화하였다. 이 문제는 일반적으로 under-determined 이지만 CG 법은 최소 norm 해를 찾을 수 있으며, 자력이상을 자력원과 연관시키는 조화함수를 선택할 자유가 있는데, 상향연속 함수 연산자가 선택되면 등가원 자체가 자력이상이 된다. 기본자기장의 방향으로의 자기 쌍극자분포를 자력원으로 선택하면, 자기 쌍극자의 방향을 수직으로 돌려줌으로써 쉽게 자극화 변환 이상을 유도할 수 있다.

• 한국습지학회지
• /
• 제21권2호
• /
• pp.140-146
• /
• 2019

비점오염원 관리를 위해 정책의 변환이 필요한 부분으로는 비점오염원관리는 국토의 이용 및 개발이 시작되는 시점부터 체계적으로 이루어지도록 제도의 패러다임이 전환되어야 한다. 비점관리지역의 국고지원 방식 및 운영방안을 전환하여 최저지원율은 보장해 주고 그 이상은 지자체의 비점오염저감사업의 추진현황과 성과등을 평가하여 추가로 지원해 줄 수 있는 방식으로의 전환을 통해 사업효과를 극대화할 필요가 있다. 신규 제도가 마련되어야 할 부분으로는 비점오염저감사업의 추진성과를 평가하고 운영효과를 모니터링 할 수 있도록 평가체계가 마련되어야 한다. 지자체가 비점오염원저감사업을 충실히 수행하여 계획된 성과를 달성하고 지속적인 유지관리가 될 수 있도록 지자체의 책임행정을 유도할 수 있는 관련 근거 규정이 필요시 된다. 대안마련이 필요한 요소로는 자동채수 분석에서 $100{\mu}m$ 필터의 사용에 따른 문제점, 강우시 채수 및 분석의 적시성 확보, 효율적인 비점측정망 운영관리 방안을 들 수 있다. 대안으로는 채수 분석장비의 성능개선, 권역별 비점오염물질측정망 모니터링통합센터 운영 등을 검토해볼 필요가 있다. 또한 국고보조사업으로 추진된 비점오염저감시설로 인한 오염물질의 삭감량을 수질오염총량제의 개발부하량으로 사용할 수 있도록 요구할 경우 삭감량에 따라 비점오염저감시설의 유지관리 비용 일부를 인센티브형식으로 지원하는 방안을 고려해 볼 수 있다.

• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.223-231
• /
• 2015

Enclosures are widely used to alleviate the contribution of machinery noise. It has been long concerned with the noise transmission through the access openings of the enclosures. In this study, we investigate active noise control technology for reduction of the transmission. A numerical model based on the acoustic boundary element method is first established. Using the numerical model, the acoustic transfer functions of the field points over the opening to the primary source at arbitrary locations are estimated. The feedforward control to minimize the acoustic power through the opening is then numerically implemented. The controller drives the secondary source to destructively interfere the noise transmission through the opening. Finally, a parametric study is conducted to evaluate the effects of the location and the number of the microphones on the control performance. Furthermore, the effects of the location of the secondary source on the performance of active noise control are investigated. It is followed that the control system implemented in this study leads to a significant reduction of about 31.5 dB in the sound power through the opening using only one secondary source located at the optimized position.