• 한국환경과학회지
• /
• 제13권4호
• /
• pp.429-434
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at 13$0^{\circ}C$ for 30min with various content of clay by melt-intercalation method under classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry(XRD), thermal gravimetric analysis(TGA), and rheometric dynamic analysis(RDA). It was found that intercalated or exfoliated state was obtained in the samples according to the condition of organic modification, clay content, and heating source.

• 암석학회지
• /
• 제17권3호
• /
• pp.133-143
• /
• 2008

지표지질의 지구화학적 변화 추적과 고고학 유물의 원료(점토질 토양)의 기원지를 밝혀내기 위한 도구로서의 희토류원소의 역할을 확인하고자 하였다. 실험용 지질시료로는 화강암과 편마암 그리고 이들로부터의 화학적 풍화과정을 거친 풍화암과 풍화토양을 선택하여 이들의 화학조성변화를 비교하였고, 고고학적 응용을 위한 시료로는 점토질 토양과 이를 이용하여 제조한 토기 및 도기를 채취하여 이들의 화학조성변화를 비교하였다. 연구결과에 의하면, 일반적인 화학조성간의 상대적인 비교로는 암석-풍화암-토양 혹은 점토질 토양-토기-도기로의 변화에 따른 지구화학적 특성변화의 상관성이 없는 반면에 PAAS(Post Archean Australian Shale)로 규격화한 희토류원소 분포도는 거의 동일한 양상을 띄었다. 이는 희토류원소의 분포도가 다른 지구화학적 연구기법에 기법에 비해 퇴적물의 기원물질 혹은 고고학적 유물의 재료를 밝혀내는데 더 유용함을 지시해준다고 볼 수 있다.

• 한국지구과학회지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2004

The clay minerals of thirty-four bottom sediments collected from the northwestern continental shelf of the East China Sea have been determined by X-ray diffraction analysis. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. The predominant clay mineral in our study area is illite comprising more-than 70% of whole clay fraction. The highest concentration of illite (>72%) is found in the southeastern offshore parts beyond the reach of terrigenous input from the Cheju Island. It means that these illites are largely transported by the Kuroshio Current from the South China Sea. Smectite is highly concentrated in the northwest middle part and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where the fine-grained sediments are discharged from the modern and ancient Huanghe River. The relatively high abundance of kaolinite is likely derived from the Changjiang River via Taiwan ·Warm Current. In contrast, the large amounts of chlorite and high chlorite/kaolinite ratios occur in the northwestern are, reflecting the transportation by the Huanghai Sea Coastal Current from the southern Yellow Sea.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1633-1637
• /
• 2019

While considering the photon attenuation coefficient (${\mu}$) and its related parameters for photons shielding, it is necessary to account for its transmitted and reflected photons energy spectra and dose contribution. Monte Carlo simulation was used to study the efficiency of clay ($1.99g\;cm^{-3}$) as a shielding material below 150 keV photon. Am-241 gamma source and an X-ray of 150 kVp were calculated. The calculated value of ${\mu}$ for Am-241 is higher within 5.61% compared to theoretical value for a single-energy photon. The calculated half-value layer (HVL) is 0.9335 cm, which is lower than that of ordinary concrete for X-ray of 150 kVp. A thickness of 2 cm clay was adequate to attenuate 90% and 85% of the incident photons from Am-241 and X-ray of 150 kVp, respectively. The same thickness of 2 cm could shield the gamma source dose rate of Am-241 (1 MBq) down to $0.0528{\mu}Sv/hr$. For X-ray of 150 kVp, photons below 60 keV were significantly decreased with 2 cm clay and a dose rate reduction by ~80%. The contribution of reflected photons and dose from the clay is negligible for both sources.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.752-757
• /
• 2001

The characteristics of heat energy distribution on the fire-proof clay with microwave heating drying are numerically investigated using finite element method. The modelled regular hexahedron chamber$(50cm\times50cm\times50cm)$ filled with air consists of vertical heat source and sink walls, a fire-proof clay model, and adiabatic plates on the top and bottom walls. With different geometrical aspect ratios of the fire-proof clay model, the heat energy distribution is throughly investigated. The model gave a good prediction of the microwave heating characteristics of fire-proof clay. The optimal shape of the fire-proof clay for given chamber geometry and microwave power is analyzed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.202-206
• /
• 2001

The characteristics of heat transfer on the fire clay with microwave heating are numerically investigated using finite element method. The modelled regular hexahedron chamber($50cm{\times}50cm{\times}50cm$) filled with air consists of vertical heat source and sink walls, a fire clay model, and adiabatic plates at the top and bottom walls. With different geometrical aspect ratios of the fire clay model, the heat energy distribution is throughly investigated. The optimal shape of the fire clay for given chamber geometry and microwave power is analyzed.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.111-122
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at $130^{\circ}C$ for 30min with various amount of MMT or OMMT used the melt-intercalation method applied the classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry (XRD), transmitted electron microscopy (TEM) differential scanning calorimetry (DSC), and rheometric dynamic analysis (RDA). It was found that intercalated or exfoliated state of the samples could be controlled by the clay type, clay content, and heating type.

• 한국미생물·생명공학회지
• /
• 제25권6호
• /
• pp.552-559
• /
• 1997

Fe (III) impurities in clay could be microbially removed by inhabitant dissimilatory Fe (III) reducing microorganisms. Insoluble Fe (III) in clay particles was leached out as soluble reductive form, Fe (II). The microorganisms removed from 10 to 45% of the initial Fe (III) when each sugar was supplemented to be in ranges of 1 - 5 % (w/w; sugar/clay). The microorganisms reduced 2.1 - 12.8 mol of Fe (III) per 100 mol of carbon in sugars metabolized when sugars such as glucose, maltose, and sucrose were used as sole carbon source. Bacillus sp. IRB-W and Pseudomonas sp. IRB-Y were isolated from the enrichment culture of the clay. The isolates were considered to participate in metabolizing organic compounds to fermentative intermediates with relatively little Fe (III) reduction at initial Fe (III) reduction process. By the microbial treatment, the whiteness of the clay was increased form 63.20 to 79.64, whereas the redness was obviously decreased form 13.47 to 3.55. This treatment did not cause any unfavorable modifications in mineralogical compositions of the clay.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.173-181
• /
• 2024

Fly ash, plastic waste, and clay are mineral materials and residues commonly found in Malaysia. In this study, these materials were fully utilized as raw materials for synthesizing carbon nanotubes (CNTs). Recycled polypropylene, previously used as a food container, served as a carbon source. Fly ash and clay were explored as potential substrates for CNTs growth. The recycled polypropylene was thermally decomposed at 900 ℃ in an inert environment for 90 minutes. Carbon atoms released during this process were deposited on fly ash and clay substrates, which had been immersed in a ferrocene solution to provide a metal catalyst for CNTs growth. The deposited products were characterized using a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). Morphological analysis revealed that both fly ash and clay were coated with fiber-like structures, confirmed to be CNTs based on a diffraction peak around 26° from the XRD pattern. In conclusion, clay and fly ash demonstrate the potential to be utilized as substrates for CNTs formation.

• KSBB Journal
• /
• 제15권2호
• /
• pp.201-207
• /
• 2000

전통적으로 사용되어 왔던 점토의 숙성과정을 과학적으로 규명하였고, 철환원세균의 농화배양액을 이용하는 생명공학기술을 이용한 개량된 점토 숙성방법을 연구하였다. 전통적으로 사용되어 왔던 수비법에 의한 점토의 숙성은 토착 미생물들이 점토에 함유된 유기물을 분해하는 과정에서 철불순물을 점토로부터 제거하여 색상을 향상시킬 뿐만 아니라 점토의 점성과 가소성 및 강도를 증진시키는 효과가 있음을 알 수 있었다. 점토숙성용 철환원세균 농화배양액을 얻는 방법을 제시하였고, 점토에 탄소원을 첨가한 후 혐기적 조건에서 농화배양액을 이용한 점토 숙성 방법을 제시하였다. 생물공학기술을 활용한 개량점토 숙성법은 전통적인 점토 숙성에서 소요되는 점토의 처리 시간을 약 1/6 수준이하로 단축시킬 수 있었고, 점토로부터 철불순물을 보다 효과적으로 제거할 수 있었을 뿐만 아니라 전통적인 방법보다도 물성이 우수한 점토로 고품위화가 가능하였다.