• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.200-209
• /
• 2011

The purpose of the study is to optimally manage sewage treatment plant with analysis of phosphorus contribution and improvement of water quality contributing rate in the effect of inflowing point of effluent and Pal-Dang lake after reducing T-P discharge from large scale public sewage treatment plant at upstream of Pal-Dang lake. Also, this study, for enforcement of T-P in effluent, plans optimal management of effluent T-P through examining propriety of environmental, technological, and economical aspect such as water quality standard of domestic and foreign T-P and related policy. In regarding optimal management of T-P discharged from public sewage treatment plant located in upstream of Pal-Dang lake, the study drew following conclusions. With the optimal management of public sewage treatment plant, it showed that a pollution level became higher in the order of Sumgang E in South-Han river, C in Dalcheon, B1 B2, A in North-Han river, and J in Kyungancheon, and it is required reduction of T-P first. The highest value in analysis of benefit-costs from sewage treatment plant in the selected research area was Kyungan B, and the others are with the order of Jojong A, Bokha A, Kyungan A, and Yanghwa A. With result of this study, all 14 areas are required more enforced phosphorus treatment. The study resulted that the most top priority areas were Hangang F, Sumgang B, and Gyungan A, top priority areas were Bokha A, Dalcheon B, and Cheongmi A, priority areas were Hangang E, Heukcheon A, Gyungan B, and Jojong A, and potential areas were Sumgang A, Yanghwa A, Dalcheon A, and Hangang D. It seems to be appropriate to apply 0.2 mg/L of T-P treatment for water supply source reservation, 0.5 mg/L for the other areas by locally, and 0.2~0.5 mg/L for biological nitrogen phosphorus treatment method and 0.5~1 mg/L for Conventional Activated Sludge by technologically. Also, it may be appropriate to apply 0.2 mg/L for the most top priority area(I), 0.3 mg/L for the top priority area(II), 0.4 mg/L for priority area(III), and 0.5 mg/L for potential area(IV) by the separation of priority area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.633-648
• /
• 2010

The study was performed to elucidate the characteristics of VOCs at distinct monitoring sites in urban atmosphere; one is at a roadside in downtown inland city of Jeonju, and the other is at an industrial site in Gunsan near coastal area. The ambient samples were collected for 24 hours in two-bed adsorbent tubes by using MTS-32 sequential tube sampler equipped with Flex air pump every 16 days in a roadside and a industrial complex from February to November in 2009. VOCs were determined by thermal desorption coupled with GC/MSD. Major individual VOCs in roadside samples were shown as following order in magnitude: toluene>m,p-xylene>ethyl benzene>decanal; and those in the industrial complex samples were as follows: toluene>ethanol>ethyl acetate>decanal>m,pxylene. High benzene concentration in the roadside was more frequently occurred than in the industrial complex. However ambient level of toluene in the industrial complex was higher than that in the road side. Results from roadside sample analysis showed that nonane and 1,2,4-trimethylbenzene were very frequently observed with higher concentrations than those in the industrial complex. It seems that nonane and 1,2,4-trimethylbenzene could be the source characteristics for the roadside air. From the diurnal variation, it was found that concentrations of benzene, ethylbenzene, xylene, nonane and 1,2,4-trimethylbenznene in the roadside were higher during rush hours; but those in the industrial complex were higher from 10 to 16 LST when the industrial activities were animated. On weekly base, the concentration of benzene, toluene, ethylbenzene and m,p-xylene in the roadside were higher specifically on Wednesday, but those in the industrial complex were higher on Sunday. It was found that the general trends of VOCs levels at both sites significantly influence on seasonal changes. The results of factor analysis showed that the VOCs in the roadside were mainly affected by the emission of vehicles and the evaporation of diesel fuel, meanwhile those in the industrial complex were influenced by the evaporation of solvents and vehicular emission.

• Steel and Composite Structures
• /
• v.36 no.4
• /
• pp.447-462
• /
• 2020

The paper aims to investigate the mechanical mechanism and seismic effect of stiffeners in blind bolt endplate connection to CFST column. A precise 3D finite element model with considering the cyclic properties of concrete and steel materials was established, and the efficiency was validated through monotonic and cyclic test data. The deforming pattern and the seismic performance of the unstiffened and stiffened blind bolt endplate connections were investigated. Then a parametric analysis was conducted to analyze the contribution of stiffeners and the joint working behaviors with endplate under cyclic load. The joint stiffness classifications were compared and a supplement stiffness classification method was proposed, and the energy dissipation ability of different class connections were compared and discussed. Results indicated that the main deformation pattern of unstiffened blind bolt endplate connections was the local bending of end plate. The vertical stiffeners can effectively alleviate the local bending deformation of end plate. And influence of stiffeners in thin endplate and thick endplate was different. Based on the stiffness of external diaphragm welded connection, a more detailed rigidity classification was proposed which included the pin, semi-rigid, quasi-rigid and rigid connection. Beam was the main energy dissipation source for rigid connection. For the semi-rigid and quasi-rigid connection, the extended endplate, stiffeners and steel beam would all participate in the energy dissipation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.108-117
• /
• 2004

Soil particles from rainfall flow into reservoir and give lots of influence in water quality because the geological conditions and landcover characteristics of Imdong watershed have a weakness against soil loss. Especially, reservoir slant is indicated by the main source area of soil loss. This study selected RUSLE model that could apply GIS and satellite image to evaluate the contribution rate of soil loss in reservoir slant. And we carried out an on-the-spot survey for the range, width and condition of reservoir slant that give much influences to the accuracy of soil loss. As the result of evaluation to the influence of soil loss in reservoir slant, it showed 2.64% in comparison with Imdong watershed. In view of these results, the influence of soil loss in reservoir slant was evaluated in low comparing with Imdong watershed relatively.

• Structural Engineering and Mechanics
• /
• v.9 no.3
• /
• pp.241-256
• /
• 2000

The major sources of energy dissipation in steel frames with partially restrained (PR) connections are evaluated. Available experimental results are used to verify the mathematical model used in this study. The verified model is then used to quantify the energy dissipation in PR connections due to hysteretic behavior, due to viscous damping and at plastic hinges if they are formed. Observations are made for two load conditions: a sinusoidal load applied at the top of the frame, and a sinusoidal ground acceleration applied at the base of the frame representing a seismic loading condition. This analytical study confirms the general behavior, observed during experimental investigations, that PR connections reduce the overall stiffness of frames, but add a major source of energy dissipation. As the connections become stiffer, the contribution of PR connections in dissipating energy becomes less significant. A connection with a T ratio (representing its stiffness) of at least 0.9 should not be considered as fully restrained as is commonly assumed, since the energy dissipation characteristics are different. The flexibility of PR connections alters the fundamental frequency of the frame. Depending on the situation, it may bring the frame closer to or further from the resonance condition. If the frame approaches the resonance condition, the effect of damping is expected to be very important. However, if the frame moves away from the resonance condition, the energy dissipation at the PR connections is expected to be significant with an increase in the deformation of the frame, particularly for low damping values. For low damping values, the dissipation of energy at plastic hinges is comparable to that due to viscous damping, and increases as the frame approaches failure. For the range of parameters considered in this study, the energy dissipations at the PR connections and at the plastic hinges are of the same order of magnitude. The study quantitatively confirms the general observations made in experimental investigations for steel frames with PR connections; however, proper consideration of the stiffness of PR connections and other dynamic properties is essential in predicting the dynamic behavior.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.121-128
• /
• 2017

This paper was to evaluate social enterprises' management efficiency with Data Envelope Analysis (DEA). The data was based on the 168 social enterprises' of annual performance reports published in 2015. The research focused on to measure both financial efficiency and social impact of the companies simultaneously. To apply DEA, the paper classified the enterprises into seven types based on types of socal impacts which each company provides before the estimation of the efficiency. The research results showed that group D, which employes disadvantaged people, provides social services and shares resources was the most efficient group and had higest net worths in Pure Technical Efficiency. In contrast, Group B, which only employs social advantage people and provides social service, was the least efficient one. The research suggests a practical and efficient framework in measuring social enterprises' management efficiency, including both the financial performance and social impacts simultaneously with their self-publishing reports. Because the Korea Social Enterprise Promotion Agency does not open business reports which social enterprises submit each year, there are basic limitations on researchers attempting to analyse with data from all social enterprises in Korea. Thus, this study dealt with only 10% of the social enterprises which self-published their performance report on the Korea Social Enterprise Promotion Agency's web site. Regardless of these limitations, this study suggested substantial methods to estimate management efficiency with the self-published reports. Because self-publishing is increasing each year, it will be the main source of information for researchers in examining and evaluating social enterprises' financial performance or social contribution. The research suggests a practical and efficient framework in measuring social enterprises' management efficiency, including both the financial performance and social impacts simultaneously with their self-publishing reports. The research results suggest not only list of efficient enterprises but also methods of improvement for less efficient enterprises.

• Journal of Fashion Business
• /
• v.15 no.6
• /
• pp.1-22
• /
• 2011

This paper is a study on the information required for developing Korean clothing products intended for Chinese students in Korea and for opening markets of Korean clothing and brands in China. It analyses the buying behaviors, purchasing ability, the favourite apparel type for clothing, and satisfaction with Korean clothing and brands of Chinese students in Korea, with which it seeks a program for South Korea branding to enter into the Chinese clothing market. Three hundred fifty seven students of Hannam University and PaiChai University Chung nam National University in Daejeon-city took part in this study. This paper adopts Descriptive Analysis, Crossing Analysis, Bivariate Correlations, and One-way ANOVA in SPSS 17.0 with Post Hoc Multiple Comparisons to know about the impact of demographic variables of Chinese students in Korea on buying information sources, the criteria for store selection, buying capacity, praise degree on various properties of Korean clothes products and their satisfaction with Korean clothes products. The first proposal of expanding China market for Korean merchants is to achieve maximum sales based on sales promotion strategies, such as the credit card corporations, the store display and sales person service development, SPA, design size development, and to upgrade consumption values. The second proposal is Korean clothes corporations should open the Internet shopping corresponding to the physical stores, the most frequently used information source of Chinese students is the network, from the age distribution of Internet users in 2008 in China, population above 10 and below 30 accounts for 66.7% of all users, In recommending clothes made in Korea to Chinese young people, on-line advertising will get better effects than other strategies, specially during advertisement, they should take good use of Korean television shows and variety shows or help Chinese poor areas to do the social contribution hereby to improve the public image of Korean clothes corporations, which can bring good sale promotion effects as well.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.255-265
• /
• 2018

This study investigated what kind of message forms and information sources more effect according to SNS' type and use intensity. To this end, this study did experimental analysis using collected data by survey which manufactured message forms and situational contents of information sources. According to analysis results, the effect of message forms showed difference according to SNS' type and use intensity. Realistic message showed greater effect in interest-based SNS and high use intensity. Evaluative message showed greater effect in relation-based SNS regardless of use intensity. The effect of information sources showed difference according to SNS' type. Friend or college and knower showed greater effect in relation- based SNS, and company showed greater effect in interest-based SNS. In the case of use intensity, friend or college showed the greatest effect without difference. Such results can provide a practical contribution in planning SNS advertising strategy. Future Studies need to expand survey variously into SNS and subject.

• The Journal of Society for e-Business Studies
• /
• v.20 no.1
• /
• pp.23-43
• /
• 2015

Information and communications technology facilitates collaboration among individuals by functioning as an open platform for open collaboration projects. In this regard, this study aims to understand the network characteristics of participants who contribute greatly to open collaboration by investigating the mutual cooperation network in an open source project, which represents a form of open collaboration based on social network theory. To achieve this objective, this study analyzes the network centrality of developers with a high number of commits, particularly 8,101 developers in 782 repositories in GitHub, a representative open source platform. This study also determines how the relationship between network centrality and number of commits depends on the size of a repository network and the presence of a hub. Consequently, the number of commits by developers with high degree, betweenness, and closeness centrality is increasing. Among which, betweenness centrality has the highest explanatory power. Furthermore, when a hub is present and as network size increases, the relationship between the betweenness centrality of a developer and his/her number of commits continues to grow. This study is expected to provide suggestions for the successful performance of open collaboration projects in the future.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.2
• /
• pp.211-221
• /
• 2012

The Ministry of Environment will enforce air quality standards for $PM_{2.5}$ in 2015 because it affects human health as well as climate change and brings about other adverse effects. Until recently, even though a number of researches have reported $PM_{2.5}$ emissions according to sources, they have not precisely considered the emission factors correspondent to each source for emission estimation. For the sake of establishing $PM_{2.5}$ emission inventories, this study was undertaken using activity data of each source taken from CAPSS (Clean Air Policy Support System) multiplied by each emission factor of U.S. EPA Speciate or EEA CORINAIR. The 2008's total annual $PM_{2.5}$ emission (73.971 ton/yr) can be apportioned into five sources, such as fuel combustion facilities (62.2%), mobiles (33.8%), production processes (3.2%), fires (0.4%), and waste treatments (0.3%). The results show that fuel combustion facilities and mobiles are the predominant sources of $PM_{2.5}$, and they should be taken into great account in establishing $PM_{2.5}$ standards. In addition, it is necessary and urgent to develop effective measures for reduction of $PM_{2.5}$ emissions from those two main sources as well.